1600 Series Liquid Level Controllers - SOR Inc.

SEE MORE AT SORInc.com

Request Quote

1600 Series Liquid Level Controllers 1600 series liquid level controllers

are manufactured to be ideal for oilfield scrubber and separator applications. Their rugged and versatile design makes them the preferred choice of production operators for reliable service in a wide variety of applications. 1600 series controllers are available with pneumatic snap or throttling pilot; direct or reverse action; with a variety of displacer sizes, materials and vessel connections.

Features • Weather proof case utilizes a gasket between its cover and case to seal out the effects of outside weathering • Well suited for liquid-liquid interface detection • Controller case is easily field reversible • Standard displacer materials are PVC and 316 stainless steel • Available with wetted materials that meet NACE MR0175 specifications for sour service • CRN certification available • LeakTite™ no bleed pilot for limiting fugitive emissions to meet EPA regulations

Product Specifications Materials of Construction Body Carbon Steel Case & Cover Die Cast Aluminum Pilots Aluminum w/SS Internals Pilot Gaskets/Diaphragm Neoprene Gauges Brass or Vibration Resistant Brass 316SS or Vibration Resistant 316SS (optional) Shaft 316SS Bearing Blocks 316SS Bearings Stainless Steel Seals Buna-N Viton® (optional) Displacer PVC 316SS (optional) Displacer Arm 316 Stainless Steel Vertical Hanger (Swivel) 316 Stainless Steel Weight Threaded 20 lbs. ͌ Flanged Consult Factory

Form 1637 (01.17) ©SOR Inc.

SORInc.com

Available End Connection Sizes Threaded & Butt Weld 2” Flanged 2”, 3”, 4”, 6” Pneumatic Pilots Snap (on/off) 0-20/0-30 psi output Throttle (modulating) 3-15/6-30 psi output Supply Pressure Requirement 3-15 or 0-20 psi output 20-30 psi min. 6-30 or 0-30 psi output 35-40 psi min. Supply & Output Connections Pneumatic Pilots: 1/4” NPTF Pressure Ratings 2” Threaded: 6000 psi Flanged: 2220 psi (900#) Specific Gravity (minimum allowable fluid) Snap and No Bleed Pilot 0.35 Throttling Pilot 0.60 Interface Minimum Differential 0.04

| 913-888-2630 | Registered Quality System to ISO 9001

1/10

1600 Series Liquid Level Controllers

Principles of Operation

The 1600 series liquid level controllers are designed to sense a liquid level and supply a pneumatic signal to a control valve to control the level of the process liquid. The 1600 series liquid level controllers sense the liquid level using a displacer and then is configured to operate a pneumatic pilot at field selectable set points. The 1600 series uses a displacer to sense the liquid level in process vessels. As the process liquid rises the displacer’s effective weight is reduced. Depending on the set points that the level controller has been configured to operate at, the pilot will supply a pneumatic signal to a control valve to control the level of the process fluid. The pilot in the 1600 series controls when the inserted pneumatic gas is sent through the outlet port to control pneumatic equipment such as a control valve. The pilot is made up of two valves. The first valve is used to allow pressure through the outlet port and the second is used to exhaust pressure. First the pneumatic air enters the inlet port with a specific pressure. This pressure pushes down on valve “1” creating a downward force holding the valve closed.

Snap Pilot

Once the level interfaces reaches the desired set point, the displacer arm will rotate the torque bar arm, thrusting the pin upwards to open valve “1” and allow the pneumatic air to flow through the outlet port. This in turn, closes the exhaust valve “2”. When the level has dropped enough for the displacer arm to be lowered, the pin will lower, closing valve “1”. Once valve “1” is closed, valve “2” will open to exhaust any pressure left in the housing.

The throttling pilot works similarly to the snap pilot. The difference being a diaphragm “3” and spring “4” are used in conjunction with valves “1” and “2” to create a force balanced throttling pilot. When the level has been raised enough, the force from the rising displacer will force the pin upwards opening valve “1” allowing the inlet pressure to flow through the outlet port. This outlet pressure also pushes on the diaphragm “3” to create a force balance. If the force acting on the pin changes, the valve “1” will either open or close to allow the forces to become balanced once again. If valve “1” closes, the pressure will be exhausted through valve 2.

Throttle Pilot

LeakTite No Bleed Snap Pilot The SOR LeakTite no bleed snap pilot also operates like the snap pilot, with the only difference being an elastomer sealing gasket to ensure proper sealing on valve “1” and “2”. This added layer of sealing protection prevents the chance of hydrocarbon gasses leaking and meets the strict requirements of the EPA.

2/10

Registered Quality System to ISO 9001

| 913-888-2630 | SORInc.com

Form 1637 (01.17) ©SOR Inc.


How to Order

Below is the SOR quick select model number tree that provides you with all the options to configure and order a product for your application. • You must select a designator for each component • Reference tables, charts and additional information are provided throughout the catalog to help you make your selections, see pages noted in the tree.

Body Material Carbon Steel Carbon Steel (NACE)

Pressure Rating

5

NPT(M) (6000 PSI) ANSI 150# ANSI 300# ANSI 600# ANSI 900#

A C D E F

End Connection Type

4

NPT(M) Raised Face Flange Ring Type Joint Flange

T R* J*

End Connection

3

20 30 40 60

2 inches 3 inches 4 inches 6 inches

Arm Length

2

10 inches 15 inches 18 inches 20 inches

10 15 18 20

Model

6 A N

7

Pilot

S T N*

Snap Pilot (Non-Bleed) Throttling Pilot (Non-Bleed) LeakTite No Bleed Snap Pilot See page 2 for comparison

8

Mounting/Controller Action

LD LR RD RR

Left Hand/Direct Left Hand/Reverse Right Hand/Direct Right Hand/Reverse See page 4 for details

9

Seal Material

B V P*

Buna-N Viton® Peroxide Infused Buna-N

10 B S C T

Gauge Type Brass Internals 316SS Internals Vibration Resistant Brass Vibration Resistant 316SS

111 Displacer Dimensions/Material A B C

1

Sealed Case 1600 Standard Case 1601

1.88” x 12” / PVC 1.66” x 12” / 316SS 1.66” x 24” / 316SS See page 4 for details

-

1600-15 20 - T

A N S - LR V S A

Example Model No.

* Options may change specifications and dimensions, contact Customer Service for more information.

Form 1637 (01.17) ©SOR Inc.

SORInc.com


3/10


Specification Guidelines

Operating Temperature Limits Body Material

Carbon Steel

___

Seals Buna Viton®

Displacer Pressure Ratings

Temperature Limits

Displacer Material

Maximum Pressure (psig)

-40 to 60

PVC

6000

-40 to 180

-40 to 82

316 Stainless Steel

2000 at 100°F (38°C)

PVC

-20 to 140

-29 to 60

316SS

-20 to 400

-29 to 204

Displacer Material

°F

°C

PVC

-40 to 140

316SS

Right or Left Mount

The 1600 Series can be configured as a right-hand mount or left-hand mount. The orientation of 1600 SERIES 1600 LEVEL LIQUID CONTROLLER LEVEL CONTROLLER the displacer toLIQUID the controllerSERIES (while facing the front side of the controller) designates the mounting style. TheLimits mounting canMaterials, be adjusted in theNameplate field. andInside For Service and For Service See Limits Materials, CaseSee Nameplate Inside Case

LEFTHAND HAND START MOUNT RIGHT HAND MOUNT UP START UP AND MOUNT LEFT MOUNT RIGHT HAND MOUNT RIGHT HAND M Rock torque bar by hand to verify arm is Rock NOT torque bar by hand to verify arm is NOT SENSITIVITY FULCRUM SNAP RING

resting against vessel nozzle. (Arm mustresting be against vessel nozzle. (Arm must be SENSITIVITY FULCRUM PROCESS CONNECTION TORQUE BAR reasonably centered in connection opening). reasonably centered in connection opening). SNAP RING FLAPPER BAR Turn adjusting knob under balance springTurn to adjusting knob under balance spring to position arm. position arm. THUMB SCREW

TO ADJUST LEVEL

ARM TORQUE BAR

PROCESS CONNEC

TO ADJUST LEVEL

Turn adjusting knob under balance springTurn to adjusting knob under balance spring to raise or lower level. raise or lower level.

TO LOWER LEVEL

Turn knob CLOCKWISE to increase compression on balance spring.

DIRECT ACTING

DIRECT ACTING TO RAISE LEVEL

ARTWORK_DIRECT_LH.DRW

ARTWORK_DIRECT_LH.DRW

CONTROLLER-DIRECT-LH.ASM

CONTROLLER-DIRECT-LH.ASM

TO LOWER LEVEL

Turn knob CLOCKWISE to increase compression on balance spring.

DIRECT ACTING TO RAISE LEVEL

ADJUSTING KNOB

DIRECT ACTING

Turn knob COUNTERCLOCKWISE Turn knob COUNTERCLOCKWISE to decrease NCREASES Pilot Output Rising Level INCREASES Pilot Outputto decrease Rising Level INCREASES Pilot Output Rising Level INCREASES Pi ARTWORK_DIRECT_RH.DRW

ARTWORK_DIRECT_RH.DRW

CONTROLLER-DIRECT-RH.ASM

compression on balance spring.

CONTROLLER-DIRECT-RH.ASM

compression on balance spring.

TO ADJUST PROPORTIONAL TO ADJUST PROPORTIONAL BAND (SPAN) BAND (SPAN) Loosen screw in sensitivity fulcrum and slide Loosen screw in sensitivity fulcrum and slide fulcrum along flapper bar. To DECREASEfulcrum along flapper bar. To DECREASE prop. band (INCREASES SENSITIVITY) slide prop. band (INCREASES SENSITIVITY) slide fulcrum toward snap ring. To INCREASE fulcrum toward snap ring. To INCREASE prop. band (DECREASES SENSITIVITY) slide prop. band (DECREASES SENSITIVITY) slide fulcrum away from snap ring. fulcrum away from snap ring.

EVERSE ACTING ARTWORK_REVERSE_LH.DRW

CONTROLLER-REVERSE-LH.ASM

REVERSE ACTING ARTWORK_REVERSE_LH.DRW

CONTROLLER-REVERSE-LH.ASM

DECREASES Pilot Output Rising Level DECREASES Pilot Output

REVERSE ACTING ARTWORK_REVERSE_RH.DRW

REVERSE ACTING

Drawing 5678291

CONTROLLER-REVERSE-RH.ASM

Form 1627 (05.15) ©SOR Inc.

Controller action is “Direct Acting” when the output signal increases as the liquid level rises on the displacer. In “Reverse Acting,” the output signal decreases as the liquid level increases on the displacer. 4/10


ARTWORK_REVERSE_RH.DRW

Rising Level DECREASES Pilot Output Rising Level DECREASES P CONTROLLER-REVERSE-RH.ASM

| 913-888-2630 | SORInc.com

Form 1637 (01.17) ©SOR Inc.

Form 1627 (05


Glossary of Terms

Proportional Band The Proportional Band is referred to as the percentage of the displacer that is used to actuate the level controller. For example, if 9 inches of change in level will actuate the level controller and a 12” long displacer is used, then the level controller will have a 75% proportional band. To adjust the proportional band, slide the fulcrum on the flapper bar along the sensitivity scale. To decrease the proportional band, increase the sensitivity. To increase the proportional band, decrease the sensitivity. Controller Action The Controller Action is determined by the orientation of the flapper bar as shown on page “4”. When the flapper bar pivot point is on the same side as the spring, the controller action is “Direct Acting”. When the flapper bar pivot point is on the opposite side as the spring, it is a “Reverse Acting” controller. The controller action is either direct acting or reverse acting. A “Direct Acting” controller will increase the output signal as the liquid rises. For a “Reverse Acting” controller, the output signal will decrease as the pressure rises. Mounting The mounting of the 1600 series liquid level controller is determined by the orientation of the body and displacer arm. While facing the front of the controller case, the side that body and displacer arm are oriented determines the mounting style. If the displacer is on the right side of the controller case while facing the front of the controller, then it is considered “right-hand”. If the displacer is on the left side of the controller case while facing the front of the controller, then it is considered “lefthand”. The mounting configuration can be easily changed out in the field.

Repair Kits Sealed Door Assembly

5678484P

Pilot Replacement Kits

Standard Door Assembly

5678483P

Sealed (1600)

Displacer Kit 12” 316SST

5678481P

Non-Sealed (1601)

Displacer Kit 12” PVC

5678480P

Displacer Kit 24” 316SST

Throttling

Quick Opening

5678390P

5678292P

Brass

5678388P

5678393P

5678482P

Vibration Resistant Brass

5678386P

5678395P

Quick Opening

5678476P

316SS

5678389P

5678394P

Throttling

5678477P

5678387P

5678396P

Swivel Assembly Kit

5678485P

Vibration Resistant 316SS Without Plugs

5678123P

5678392P

Displacer Assembly Kits

With Plugs

Pilot Repair Kits

Process Seal Repair Kit BUNA-N 5678478P Process Seal Repair Kit VITON 5678479P

Form 1637 (01.17) ©SOR Inc.

SORInc.com


5/10


Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for certified drawings for a particular model number. Dimensions are expressed as millimeters over inches (Linear = mm/in.) MODEL #

101.6 4

/64

/64

101.6 4

73.0 2-7/8

101.6 4

101.6 4 124.6 4-29/32 SALES ORDER #

73.0 2-7/8

MODEL #

LINE ITEM #

101.6 4 73.0 2-7/8 LINE ITEM #

LINE ITEM #

101.6 131.5 4 5-11/64

PURCHASE ORDER #

43.3 1-45/64

101.6 4

53.2 2-3/

131.5 5-11/64 20.2 51/64 LINE ITEM #

PURCHASE ORDER #

222.3 8-3/4 131.5 5-11/64 20.2 51/64

1/4" NPTF

222.3 8-3/4

205. 8-7/6

SALES PAGE

SALES PAGE

A

1

124.6 4-29/32

131.5 5-11/64

205.8 8-7/64

PURCHASE

205.8 8-7/64

PURCHASE ORDER #

205.8 8-7/64

20.2 51/64

1/4" NPTF

20.2 51/64

101.6 4

LINE ITEM #

1/4" NPTF

43.3 124.6 1-45/64 4-29/32

SALES ORDER #

PURCHASE ORDER #

43.3 131.5 1-45/64 SALES ORDER #5-11/64 20.2 1/4" NPTF 51/64 43.3 1-45/64

MODEL #

53.2 2-3/32

53.2 2-3/32 1

C 1

222.3 8-3/4

C 1

A

2" NPTM

124.6 4-29/32

B

2"222.3 NPTM 8-3/4

2

/64

SALES ORDER #

1600 Sealed Case Level Controller

73.0 2-7/8

MA

Dimensions

1

ARM LENGTH DIM C 222.3 130.4 10 INCH 8-3/4 5-1/8 257.4 15 INCH 10-1/8 ARM LENGTH

DIM B 47.6 1-7/8 42.2 1-21/32 42.2 1-21/32

A 97.6 3-27/32

B

DIM C 97.6 3-27/32 130.4 10AINCH 1 5-1/8 DISPLACER DIM15 A INCH DIM B 257.4 10-1/8 340.8 47.6 B 1.88 X 12 PVC 13-27/64 1-7/8 340.8 42.2 1.66 X 12 316SST ARM13-27/64 LENGTH DIM C DISPLACER DIM A DIM B 1-21/32 130.4 340.8 47.6 NOTES: 645.6 42.2 1.88 X 12 PVC 1.66 X 24 316SST 10 INCH 5-1/8 13-27/64 1-7/8 1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT. 25-27/64 1-21/32 1 257.4 340.8 42.2 B 15 INCH 1.66 X 12 316SST 14685 W 105TH ST LENEXA, KS 66215 USA 10-1/8 13-27/64 1-21/32 Model Name: 5678301.ASSEM/1.29 913-888-2630 SORINC.COM ISO-9001 NOTES: 645.6 42.2 1.66 X 24 316SST DRAWN BY 1. DIMENSION APPROXIMATE AND BASED ON A FIVE THRE 25-27/64 1-21/32 1 J REHM PRODUCT CERTIFICATION DRAWING CHECKED BY DISPLACER DIM A DIM B ALL DIMENSIONS ARE 1/16 IN M SMITH Model Name: 5678301.ASSEM/1.29 B 340.8 47.6 ENGINEER APPROVAL 14685 W 105TH ST LENEXA, KS 66215 USA UNLESS OTHERWISE SPECIFIED 1.88 X 12 PVC MM 13-27/64 1-7/8 LINEAR = 913-888-2630 S BOAL IN DATE SORINC.COM ISO-9001 340.8 42.2 10/16/15 1.66 X 12 316SST DRAWN BY 13-27/64 1-21/32 THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. J REHM NO USE WHATSOEVER OF THE INFORMATION CONTAINED PRODUCT CERTIFICATION DRAWING NOTES: 645.6 42.2 CHECKED BY HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE 1.66 X 24 316SST MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR. ALL DIMENSIONS ARE 1/16 IN1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENG 25-27/64 1-21/32 M SMITH 1 UNLESS OTHERWISE SPECIFIED Drawing 5678451 LINEAR =

Model Name: 5678301.ASSEM/1.29

1

ENGINEER APPROVAL TITLE

MM IN

DIM DWG 1600 SEALED CONTROLLER

S BOAL DATE

10/16/15 EO NUMBER: 5319 NOTES: DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. 1. DIMENSION APPROXIMATE AND BASED ON ATHIS FIVE THREAD ENGAGEMENT. SCALE: 0.25 NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.

DO NOT SCALE PRINT

DRAWING NUMBER

5678451 SHEET 1 OF 1

TITLE

6/10

DIM DWG 1600 SEALED CONTROLLER


ION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT.

| 913-888-2630 | SORInc.com EO NUMBER: 5319 SCALE: 0.25

DRAWING NUMBER

5678451

REV

Form 1637 (01.17) ©SOR Inc.

1 DWG SIZE

REV

1 DWG SIZE

B

8-3/32 101.6 4

99.2 3-29/32

50.8 2

1600 Series 73.0 FLANGE 2-7/8 PROCESS CONNECTION Liquid Level Controllers SALES ORDER #

124.6 4-29/32

SALES PAGE

PURCHASE ORDER #

Dimensions

205.8 8-3/32

131.9 in this catalog are for reference only. They may be changed without notice. Contact the Dimensions 222.3 101.6 5-3/16 8-3/4factory for certified drawings for a particular model number. 4 Dimensions are expressed as millimeters 20.6 99.2 50.8 over inches (Linear 13/16 = mm/in.) 3-29/32 2 97.6

DIM B

45

MODEL #

3-27/32

22.5

1600 Sealed CaseSALES Flanged ORDER # Level Controller 124.6 4-29/32

# 22.5 B

22.5

LINE ITEM #

73.0 2-7/8

LINE ITEM #

1/4" NPTF

A

C 1

SALES OR

FLANGE PROCESS PURCHASE ORDER # CONNECTION FLANGE DIM A DIM B

205.8

165.1 8-3/32 45 6-1/2 FLANGE DIM A DIM B 22.5 101.6 173 2" 300# RF 22.5 4 6-13/16 165.1 99.2 50.8 "45 150# RF 45 182.6 6-1/2 2" 600# RF 22.5 3-29/32 2 7-3/16 173 22.5 " 300# RF 22.5 204.7 FL 6-13/16 2"73.0 900# RTJ 22.5 B 8-1/16 2-7/8 PR 1/4" NPTF 182.6 204.7 22.5 " 600# RF 22.5 CO 2" 1500# RTJ 22.5 124.6 7-3/16 A 8-1/16 C 1 4-29/32 204.7 166.6 14685 W 105TH ST LENEXA, KS 66215 USA 22.5 900# RTJ 22.5 3" 150# RF 45 913-888-2630 8-1/16 6-9/16 222.3 SALES PAGE E SORINC.COM ISO-9001 8-3/4 171.5 SALES ORDER # LINE ITEM # PURCHASE ORDER # 204.7 22.5 1 3" 300# RF 22.5 DRAWN BY 1500# RTJ 22.5 6-3/4 8-1/16 J REHM PRODUCT CERTIFICATION DRAWING 181.1 CHECKED BY 97.6 ARM LENGTH DIM E 22.5 DIM D 166.6 3" 600# RF 22.5 ALL DIMENSIONS ARE 1/16 IN 205.8 " 150# RF 45 7-1/8 M SMITH 3-27/32 6-9/16 UNLESS OTHERWISE SPECIFIED 8-3/32 407.8 47.6 ENGINEER APPROVAL 15 131.9 INCH 246.1 MM 16-1/16 B LINEAR = 22.5 1-7/8 3" 900# RTJ 22.5 S BOAL 171.5 101.6 IN 5-3/16 9-11/16 " 300# RF 22.5 DATE 484 6-3/4 4 42.2 18 INCH B 5/4/16 261.9 19-1/1620.6 D 1500# RTJ 22.5 99.2 50.8 22.5 1-21/32 181.1 1/4" 3" NPTF 10-5/16 THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. 14685 W 105TH ST LENEXA, KS 66215 USA " 600# RF 22.5 534.8 13/16 3-29/32 2 NO USE WHATSOEVER OF THE INFORMATION CONTAINED 913-888-2630 42.2 7-1/8 20 INCH 166.6 HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE A C 1 SORINC.COM 4" 150# RF 22.5 21-1/16 22.5 1-21/32 MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR. ISO-9001 6-9/16 246.1 73.0 FLANGE 900# RTJ 22.5 DRAWN BY TITLE 9-11/16 174.8 2-7/8 PROCESS 22.5 J REHM 4" 300# RF DIM DWG 1600 SEALED CONTROLLER W/FLANGE E 22.5 PRODUCT CERTIFICATION DRAWING 6-7/8 CHECKED BY CONNECTION ARM LENGTH DIM E 261.9 DISPLACER DIM C DIM D PROCESS CONNECTION 124.6 ALL DIMENSIONS ARE 1/16 IN 1500# RTJ 22.5 1 M SMITH 190.5 DRAWING NUMBER REV 10-5/16 4-29/32 EO NUMBER: 5341 407.8 4" 600# RFUNLESS OTHERWISE SPECIFIED 22.5 ENGINEER APPROVAL 340.8 47.6 22.5 15 INCH 7-1/2 MM X 12 PVC XIMATE AND BASED ON A1.88 5678447 1 16-1/16 LINEAR = 13-27/64 1-7/8 S BOAL 166.6 FIVE THREAD ENGAGEMENT. IN SCALE: 0.25 DWG SIZE 222.3 " 150# RF 22.5 258.8 DATE 6-9/16 SHEET 1 OF 1 4" 900# RTJ 22.5 484 340.8 42.2 DO NOT SCALE PRINT 8-3/4 B 10-3/16 15 18 INCH 5/4/16 1.66 X 12 316SST 19-1/16 13-27/64 1-21/32 174.8 THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. 271.5 " 300# RF 22.5 4" 1500# RTJ 22.5 NO USE WHATSOEVER OF THE INFORMATION CONTAINED 534.8 6-7/8 645.6 42.2 10-11/16 97.6 15 20 INCH DISP HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE 1.66 X 24 316SST 21-1/16 25-27/64 1-21/32 MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR. 190.5 3-27/32 222.3 " 600# RF 22.5 6" 150# RF 22.5 SALES PAGE D TITLE 1.88 X 7-1/2 8-3/4 146 15 DIM DWG 1600 SEALED CONTROLLER W/FLANGE LINE ITEM # PURCHASE ORDER # 233.4 258.8 PROCESS 6" 300# RF CONNECTION 15 900# RTJ 22.5 1.66 X 1 ISO-9001 B 9-3/16 DRAWING NUMBER REV 10-3/16 NOTES: 15 EO NUMBER: 5341 1/4" NPTF 205.8 1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT. 257.3 5678447 1 271.5 1 6" 600# RF 0.25 15 1.66 X 2 SCALE: 1500# RTJ 22.5 DWG SIZE 10-1/8 PRODUCT CERTIF A ARM LENGTH 1DISPLACER C 8-3/32 10-11/16 DIM E SHEET 1 OF 1 DIM C DIM D DO NOT SCALE PRINT B ALL DIMENSIO 270 101.6 6" 900# RTJ 15 UNLESS OTHE 222.3 407.8 340.8 47.6 10-5/8 " 150# RF 22.5 41.88 X 12 PVC 15 INCH E 8-3/4 16-1/16 20.6 LINEA 99.2 50.8 13-27/64 1-7/8 303.3 6" 1500# RTJ 15 13/16 1 484 233.4 2 11-15/16 340.8 42.2 " 300# RF 15 3-29/32 18 INCH 1 1.66 X 12 316SST 9-3/16 19-1/16

257.3 10-1/8 124.6 270 4-29/32 10-5/8 303.3 11-15/16

" 600# RF 900# RTJ

1500# RTJ

me: 5678447.ASSEM/1.1

B

15

13-27/64 645.6 1.66 X 24 316SST 25-27/64

73.0 2-7/8

15 222.3 15 8-3/4

2" 150# RF

1-21/32 FLANGE 534.8 42.2 20 5678447.ASSEM/1.1 INCH PROCESS Model Name: 21-1/16 1-21/32 CONNECTION Drawing

1

DIM D 47.6 1-7/8 42.2 1-21/32 42.2 1-21/32

A

DIM E 407.8 15 INCH 16-1/16 484 18 INCH 19-1/16 534.8 20 INCH E 21-1/16 1

PRODUCT CERTIFICATION DRAWING ALL DIMENSIONS ARE 1/16 IN UNLESS OTHERWISE SPECIFIED MM LINEAR = IN

ARM LENGTH

SORInc.com

Form 1637 (01.17) ©SOR Inc.

|

M SMITH ENGINEER APPROVAL

S BOAL DATE

TITLE

DIM DWG 1600 SEALED CONTROLLER W/FLANGE PROCESS CONNECTION SCALE: 0.25

14685 W 105TH ST LENEXA, KS 66215 USA 913-888-2630 SORINC.COM 913-888-2630 Registered Quality System ISO-9001

|

PRODUCT CERTIFICATION DRAWING

CHECKED BY

5/4/16

DRAWN BY

DIM E

DO NOT SCALE PRINT

J REHM

THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.

EO NUMBER: 5341

J REHM CHECKED BY

5341

SCALE: 0.25

DRAWN BY

NOTES: 1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT.

ARM LENGTH

TITLE

ISO-9001

DO NOT SCALE PRINT

DIM D

5678447

14685 W 105TH ST LENEXA, KS 66215 USA NOTES: EO NUMBER: 1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT. 913-888-2630 SORINC.COM

D

DIM C

THIS DRAWING NO USE WHATSO HEREON, NOR RE MADE WITHOUT TH

DIM DWG 1600 SEA PROCESS CONNECT

D

97.6 3-27/32 DISPLACER DIM C 340.8 1.88 X 12 PVC 13-27/64 1/4" NPTF 340.8 1.66 C 1 X 12 316SST 13-27/64 645.6 1.66 X 24 316SST 25-27/64

1

222.3 131.9 8-3/4 5-3/16 E 97.6 20.6 1 3-27/3213/16

DRAWING NUMBER

5678447 SHEET 1 OF 1

to ISO 9001

REV

1 DWG SIZE

B

7/10


Dimensions

Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for certified drawings for a particular model number. Dimensions are expressed as millimeters over inches (Linear = mm/in.) MODEL #

SALES ORDER #

1601 Standard Case MODEL # Level Controller

42.9 1-11/16 152.5 6

25.4 1

LINE ITEM #

69.1 2-23/32

LINE ITEM #

4-5/16

16.4 42.9 41/64 1-11/16

152.5 6

1/4" NPTF

152.5 6

69.1 2-23/32

SALES ORDER #

LINE ITEM #

16

152.5 109.4 6

25.4 1

4-5/16

.1 23/32

205.6 8-3/32

16.4 41/64

F

SALES PAGE

4-29/32

53.3 2-3/32

1

DISPLACER

C 1

A

222.3 8-3/4

2" NPTM

B

222.3 8-3/4

A

1

2" NPTM

97.6 3-27/32

B ARM LENGTH 10 INCH A 15 INCH

DIM C 130.4 5-1/8 257.4 10-1/8

DIM A DIM B 340.8 47.6 1.88 X 12 PVC 13-27/64 1-7/8 DISPLACER 340.8 42.2 1.66 X 12 316SST ARM LENGTH DIM C 13-27/64 1-21/32 1.88 X 12 PVC 130.4 645.6 42.2 10 INCH 1.66 X 24 316SST 5-1/8 25-27/641.66 1-21/32 X 12 316SST 257.4 15 INCH 10-1/8 Model Name: 5678300.ASSEM/1.28 1.66 X 24 316SST

DIM C 30.4 1/8 57.4 0-1/8

53.3 1 2-3/32

C 1

124.6 4-29/32

DIM C 130.4 10 INCH 5-1/8 222.3 257.4 8-3/4 15 INCH 10-1/8

124.6 SALES PAGE 205.6 8-3/32

ARM LENGTH

6 /32

A

1

16.4 41/64

1/4" NPTF

222.3 8-3/4

16.4 41/64

PURCHASE ORDER #

109.4 4-5/16

PURCHASE ORDER #

PURCHASE OR

222.3 8-3/4 109.4 4-5/16

1/4" NPTF

LINE ITEM #

42.9 1-11/16

LINE ITEM #

53 2-3

16.4 41/64

124.6 42.9 4-29/32 1-11/16 25.4 1

PUR

205.6 8-3/32

109.4 4-5/16

124.6 4-29/32SALES ORDER #

69.1 2-23/32

MODEL #

SALES 109.4 ORDER #

1/4" NPTF 25.4 1

PURCHASE ORDER #

DIM A 340.8 13-27/64 340.8 13-27/64 645.6B 25-27/64

97.6 3-27/32

B DIM B 47.6 1-7/8 NOTES: 42.2 1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT. 1 1-21/32 14685 W 105TH ST LENEXA, KS 66215 USA 42.2 NOTES: 913-888-2630 1-21/32 1. DIMENSION APPROXIMATE AND BASED ON A FIVE TH SORINC.COM 1 ISO-9001 DRAWN BY

DISPLACER

DIM A 340.8 1.88 X 12 PVC 13-27/64 340.8 1.66 X 12 316SST 13-27/64 645.6 1.66 X 24 316SST 25-27/64 Model Name: 5678300.ASSEM/1.28

B

DIM A 340.8 13-27/64 340.8 13-27/64 645.6 25-27/64

DIM B 47.6 1-7/8 42.2 1-21/32 42.2 1-21/32

DIM B 47.6 1-7/8 42.2 1-21/32 42.2 1-21/32

ISO-9001

ALL DIMENSIONS ARE 1/16 IN UNLESS OTHERWISE SPECIFIED MM LINEAR = IN


SION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT.


S BOAL DATE

10/16/15

Drawing 5678450

CHECKED BY

TITLE


S BOAL

DIM DWG 1601 STANDARD CONTROLLER EO NUMBER: 5319

DATE

10/16/15

SCALE: 0.25 DO NOT SCALE PRINT

DRAWING NUMBER

5678450 SHEET 1 OF 1

TITLE


CHECKED BY

THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.

THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.

8/10

J REHM

DRAWN BY NO USE WHATSOEVER OF THE INFORMATION CONTAINED NOTES: HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE J REHM 1. DIMENSION APPROXIMATE BASED ON A FIVE E MADE WITHOUT AND THE EXPRESS WRITTEN PERMISSION OF THREAD SOR. 1 DRAWING PRODUCT CERTIFICATION


1

14685 W 105TH ST LENEXA, KS 66215 USA 913-888-2630 SORINC.COM


DIM DWG 1601 STANDARD CONTROLLER | 913-888-2630 | SORInc.com EO NUMBER: 5319

DRAWING NUMBER

5678450

Form 1637 (01.17) ©SOR Inc. REV

1

REV

1 DWG SIZE

B

8-3/32 99.2 3-29/32

25.4 1

FLANGE 1600 Series PROCESS CONNECTION Liquid Level Controllers 69.1 SALES ORDER #

24.6 -29/32 222.2 8-3/4

DIM B

45

LINE ITEM #

SALES PAGE

PURCHASE ORDER #

109.4 2-23/32 Dimensions 4-5/16

Dimensions 205.6 may be 8-3/32

in this catalog are for reference only. They changed without notice. Contact the 16.4 99.2 factory for certified drawings for a particular model number. Dimensions are expressed as millimeters 25.4 41/64 3-29/32 1 97.6 over inches (Linear = mm/in.) 3-27/32 MODEL #

22.5

22.5

MODEL #

C 1 22.5

1601 Standard124.6 Case 4-29/32 SALES ORDER69.1 # A Flanged Level Controller

1/4" NPTF

222.2 8-3/4

LINE ITEM # FLANGE

2-23/32

SALES OR

FLANGE PROCESS CONNECTION

PURCHASE # DIM ORDER A

109.4 4-5/1

DIM B

165.1 45 6-1/2 205.6 22.5 173 8-3/32 2" 300# RF 22.5 FLANGE DIM A DIM B 6-13/16 3-27/32 16.4 99.2 45 25.4 182.6 165.1 2" 600# RF 22.5 41/64 3-29/32 2" 150# RF 45 7-3/16 1 6-1/2 22.5 204.7 B 173 2" 900# RTJ 22.5 8-1/16 2" 300# RF 22.5 1/4" NPTF 6-13/16 A 22.5 204.7 C 1 2" 1500# RTJ 22.5 182.6 8-1/16 124.6 2" 600# RF 22.5 7-3/16 4-29/32 166.6 22.5 14685 W 105TH ST LENEXA, KS 66215 USA ERF 3" 150#69.1 45 SALES PAGE 204.7 913-888-2630 2-23/32 6-9/16 2" 900# RTJ 22.5 222.2 1 SORINC.COM SALES ORDER # LINE ITEM # PURCHASE ORDER # 8-1/16 ISO-9001 171.5 22.5 8-3/4 3" 300# RF 22.5 DRAWN BY 6-3/4 204.7 2" 1500# RTJ 22.5 J REHM 181.1 8-1/16 PRODUCT CERTIFICATION DRAWING CHECKED BY 22.5 3" 600# RF 22.5 97.6 ARM LENGTH DIM E DIM D ALL DIMENSIONS ARE 1/16 IN 205.6M SMITH 7-1/8 109.4 166.6 3-27/32 UNLESS OTHERWISE SPECIFIED 8-3/32 3" 150# RF 45 ENGINEER APPROVAL 407.8 47.6 4-5/16 246.1 MM 15 INCH 6-9/16 22.5 3" 900# RTJ 22.5 LINEAR = S BOAL 16-1/16 1-7/8 9-11/16 IN 16.4 99.2 DATE 25.4 171.5 484 D 42.2 3" 300# RF 22.5 261.9 3-29/32 5/4/16 B 18 INCH 41/64 1 3" 1500# RTJ 22.5 6-3/4 22.5 19-1/16 1-21/32 10-5/16 THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. 14685 W 105TH ST LENEXA, KS 66215 USA 1/4" NPTF NO USE WHATSOEVER OF THE INFORMATION CONTAINED 181.1 913-888-2630 A 534.8 42.2 3" 600# RF 166.6 22.5 FLANGE HEREON, NOR REPRODUCTION IN WHOLE OR 20 INCH 4" 150# RF 22.5 C PART 1 MAY BE SORINC.COM 22.5 7-1/8 MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR. ISO-9001 6-9/16 21-1/16 1-21/32 PROCESS DRAWN BY TITLE 246.1 174.8 CONNECTION 22.5 J REHM 22.5 124.6 4" 300# RF 22.5 3" 900# RTJ DIM DWG 1601 STANDARD CONTROLLER W/FLANGE 6-7/8 9-11/16 PRODUCT CERTIFICATION DRAWING CHECKED BY 4-29/32 PROCESS 69.1 CONNECTION ARM LENGTH DIM E DISPLACER DIM C DIM D ALL DIMENSIONS ARE 1/16 IN 190.5 M SMITH 261.9 DRAWING NUMBER REV 4" 600# RF 22.5 UNLESS OTHERWISE SPECIFIED EO NUMBER: 5341 3" 1500# RTJ 22.5 2-23/32 ENGINEER APPROVAL 22.5 407.8 222.2 340.8 47.6 7-1/2 MM 10-5/16 15 INCH 5678446 1 X 12 PVC ENGAGEMENT. LINEAR = ROXIMATE AND BASED ON1.88 A FIVE THREAD S BOAL 16-1/16 13-27/64 1-7/8 8-3/4 SCALE: 0.25 258.8IN DWG SIZE DATE 166.6 4" 900# RTJ 22.5 SHEET 1 OF 1 22.5 15 4" 150# RF 484 10-3/16 340.8 42.2 DO NOT SCALE PRINT B 5/4/16 18 INCH 1.66 X 12 316SST 6-9/16 19-1/16 13-27/64 1-21/32 97.6 271.5 THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. 4" 1500# RTJ 22.5 174.8 NO USE WHATSOEVER OF THE INFORMATION CONTAINED 3-27/32 10-11/16 15 4" 300# RF 534.8 645.6 42.2 HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE 20 INCH 1.66 X 24 316SST 22.5 6-7/8 MADE WITHOUT222.3 THE EXPRESS WRITTEN PERMISSION OF SOR. 21-1/16 25-27/64 1-21/32 6" 150# RF 22.5 SALESTITLE PAGE D 190.5 8-3/4 15 4" 600# RF 22.5 DIM DWG 1601 STANDARD CONTROLLER W/FLANGE LINE 7-1/2 ITEM # B PURCHASE ORDER # 233.4 6" 300# RF CONNECTION 15 PROCESS 9-3/16 DRAWING NUMBER 1/4" NPTF 258.8 A 15 4" 900# RTJ REV 22.5 EO NUMBER: 5341 NOTES: C 1 10-3/16 257.3 5678446 1 6" 600# RF 15 1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT. 1 205.6 10-1/8 SCALE: 0.25 DWG SIZE 271.5 SHEET 1 OF 1 8-3/32 4" 1500# RTJ 22.5 DO NOT SCALE PRINT B 270 E 10-11/16 6" 900# RTJ ARM LENGTH10-5/8 DIM E 15 DIM C DIM D 16.4 99.2DISPLACER 25.4 1 222.3 407.8 41/64 6" 150# RF 3-29/32 340.8 47.6 303.3 1 22.5 8-3/4 6" 1500# 15 RTJINCH 15 1.88 X 12 PVC 11-15/16 16-1/16 13-27/64 1-7/8 2" 150# RF

E 109.4 4-5/16 1 97.6

233.4 15 9-3/16 257.3 15 10-1/8 69.1 D 270 2-23/32 15 222.2 10-5/8 8-3/4 303.3 15 11-15/16 97.6 3-27/32

6" 300# RF 124.6 6" 600# RF 4-29/32 6" 900# RTJ 6" 1500# RTJ

DISPLACER

DIM C Model Name: 5678446.ASSEM/1.1 340.8 B 1.88 X 12 PVC 13-27/64 1/4" NPTF 340.8 C 1.66 1 X 12 316SST 13-27/64 645.6 1.66 X 24 316SST 25-27/64

FLANGE 340.8 42.2 13-27/64 PROCESS 1-21/32 CONNECTION 645.6 42.2 1.66 X 24 316SST 25-27/64 1-21/32

1.66 X 1

ISO-900

1.66 X 2

PRODUC ALL D UNLE

1


20 INCH

THI NO US HEREO MADE W TITLE

14685 W 105TH ST LENEXA, KS 66215 USA DIM DWG PROCESS C 913-888-2630 SORINC.COM EO NUMB

1 DIM D 47.6 1-7/8 42.2 1-21/32 42.2 1-21/32

ISO-9001 NOTES: 1. DIMENSION APPROXIMATE AND BASED ON A FIVE THREAD ENGAGEMENT. DRAWN BY


ARM LENGTH

DIM E 407.8 15 INCH 16-1/16 A 484 18 INCH 19-1/16 534.8 E 20 INCH 1 21-1/16

SCALE: 0.

J REHM CHECKED BY

DO NO


S BOAL DATE

5/4/16 THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR. TITLE

Drawing 5678446

DIM DWG 1601 STANDARD CONTROLLER W/FLANGE PROCESS CONNECTION

1

DISPL

1.88 X

484 19-1/16 534.8 21-1/16

18 INCH

1.66 X 12 316SST

E 1


EO NUMBER: 5341 SCALE: 0.25 DO NOT SCALE PRINT

D

Form 1637 (01.17) ©SOR Inc.

SORInc.com

|

14685 W 105TH ST LENEXA, KS 66215 USA 913-888-2630 SORINC.COM 913-888-2630 Registered Quality System ISO-9001

|

DRAWN BY

PRODUCT CERTIFICATION DRAWING

J REHM CHECKED BY

DRAWING NUMBER

5678446 SHEET 1 OF 1

to ISO 9001

REV

1 DWG SIZE

B

9/10

SOR Inc. | Lenexa, KS USA | 913-888-2630 | Fax 913-888-0767 | SORInc.com REGIONAL OFFICES China

Middle East

SOR China | Beijing, China | [email protected]

SOR Measurement & Control Equipment Trading DMCC | Dubai, UAE

+86 (10) 5820 8767 | Fax +86 (10) 58 20 8770

10/10


[email protected] | +971 4 363 3637 | Fax + 1 913 312 3596

| 913-888-2630 | SORInc.com

Form 1637 (01.17) ©SOR Inc.