AD-26 / AD-295 P arts Manual - Fowler Companies

AD-26 / AD-295 Par ts Manual 24 VAC Phase 5 1992 thru 1998

American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] www.amdry.com ADC Part No. 450122

Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY properly licensed technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer.

WARNING: UNDER NO CIRCUMSTANCES should the door switch or the heat circuit devices ever be disabled. WARNING: The dryer must never be operated with any of the back guards, outer tops, or service panels removed. PERSONAL INJURY or FIRE COULD RESULT. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important For your convenience, log the following information:

DATE OF PURCHASE DISTRIBUTORS NAME Serial Number(s)

________________________________________ MODEL NO. _______________________________ __________________________________________________________________________________

________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________

Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the ADC Parts Department at (508) 678-9010. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS MUST BE POSTED IN A PROMINENT LOCATION. THE INSTRUCTIONS TO BE POSTED SHALL BE OBTAINED FROM THE LOCAL GAS SUPPLIER.

Table of Contents Coin Control Door Assembly For Models Mfd. as of March 21, 1997 ................................................. 2 Coin Control Door Assembly For Models Mfd. prior to March 21, 1997 .............................................. 3 Non-Coin Control Door Assembly For Models Mfd. as of March 21, 1997 .......................................... 4 Non-Coin Control Door Assembly For Models Mfd. prior to March 21, 1997 ....................................... 5 Dual Timer Control Door Assembly For Models Mfd. as of March 21, 1997 ....................................... 6 Dual Timer Control Door Assembly For Models Mfs. prior to March 21, 1997 .................................... 7 Single Coin Microprocessor Control Panel Assembly For Models Mfd. as of April 11, 1996 ............... 8 Single Coin Microprocessor Control Panel Assembly for Single Coin 25¢ Models Only .................... 9 Dual Coin Microprocessor Control Panel Assembly ......................................................................... 10 Non-Coin Microprocessor Control Panel Assembly .......................................................................... 11 Microprocessor Control Box Assembly ............................................................................................. 12 25¢ Coin Acceptor Listing ................................................................................................................. 13 Dual Coin Acceptor Component Listing for Export Models Only ................................................. 14, 15 Dual Timer Control Panel Assembly ................................................................................................. 16 Non-Microprocessor Coin Control Panel Assembly .......................................................................... 17 Non-Microprocessor Control Box Assembly ..................................................................................... 18 Main Door Assembly ......................................................................................................................... 19 Main Door Switch Assembly ............................................................................................................. 20 Coin Vault Assembly ......................................................................................................................... 21 Coin Front Panel Assembly ............................................................................................................... 22 Non-Coin Front Panel Assembly ....................................................................................................... 23 Lint Door Assembly ........................................................................................................................... 24 Lint Basket / Lint Switch Assemblies ................................................................................................ 25 AD-26 Tumbler / Support Assemblies For Models Mfd. as of August 17, 1998 ................................. 26 AD-26 Tumbler / Support Assemblies For Models Mfd prior to August 17, 1998 .............................. 27 AD-295 Tumbler / Support Assemblies For Models Mfd. as of November 2, 1998 ........................... 28 AD-295 Tumbler / Support Assemblies For Models Mfd. prior to November 2, 1998 ........................ 29 Tumbler Brush Assembly .................................................................................................................. 30 Microprocessor Temperature Sensor Bracket Assembly ................................................................. 31 Non-Microprocessor Temperature Sensor Bracket Assembly .......................................................... 32 Sail Switch Assembly ........................................................................................................................ 33 Tumbler Bearing Assembly ......................................................................................................... 34, 35 Totally Enclosed, Non-Vent Motor / Idler Assemblies ................................................................... 36, 37 Upshot Burner Assembly ............................................................................................................ 38, 39 Back Guard Assembly....................................................................................................................... 40 12-Rib 120" (J) Poly Belt Arrangement ............................................................................................. 41 Upshot Burner Assembly Specifications ........................................................................................... 42 Additional Parts Available .................................................................................................................. 43

AD-26/AD-295 Coin Control Door Assembly For Models Mfd. as of March 21, 1997

Illus. No. 1

Part No.

Qty.

881585

1

881583

1

3 4

112350 870011 160040 160140

1 1 2 -

5 6 7

180315 150310 150300

1 5 4

2

Description AD-26/AD-295 Coin Control Door with Trim Less Locks (includes illus. nos. 1, 5, and 6) AD-26/AD-295 Stainless Steel Coin Control Door with Trim Less Locks (includes illus. nos. 1, 5, and 6) ADC Logo Only Logo Double Stick Tape Kit ACE® Lock Assembly Only ACE® Key Only (key number XX4451) AD-26/AD-295 Lower Control Door Trim #8 x 1/2" Phillips Pan Head "A" Screw #10 x 1/2” Hex Washer TEK Screw

* Specify color when ordering. 2

American Dryer Corporation

450122-6

Coin Control Door Assembly For Models Mfd. prior to March 21, 1997

Illus. No. 1

Part No.

Qty.

880236

1

3 4

850414 112350 870011 160040 160140

1 1 1 1 -

5 6

180315 150310

1 5

2

Description AD-26/AD-295 Coin Control Door with Trim Less Locks (includes illus. nos. 1, 5, and 6) AD-26/AD-295 Coin Control D ADC Logo Only Logo Double Stick Tape Kit ACE® Lock Assembly Only ACE® Key Only (key number XX4451) AD-26/AD-295 Lower Control Door Trim #8 x 1/2" Phillips Pan Head "A" Screw

* Specify color when ordering. 450122-6

Telephone: (508) 678-9000 / www.amdry.com

3

Non-Coin Control Door Assembly For Models Mfd. as of March 21, 1997

Illus. No.

Part No.

Qty.

1

881586

1

2 3 4

112350 870011 160040 160140

1 1 2 -

5 6 7

180315 150310 150300

1 5 4

Description AD-26/AD-295 Non-Coin Control Door with Trim Less Locks (includes illus. nos. 1, 5, and 6) ADC Logo Only Logo Double Stick Tape Kit ACE® Lock Assembly Only ACE® Key Only (key number XX4451) AD-26/AD-295 Lower Control Door Trim #8 x 1/2" Phillips Pan Head "A" Screw #10 x 1/2” Hex Washer TEK Screw



450122-6

Non-Coin Control Door Assembly For Models Mfd. prior to March 21, 1997

Illus. No.

Part No.

Qty.

1

880918*

1

3 4

880917* 112350 870011 160040 160140

1 1 1 1 -

5 6

180315 150310

1 5

2

Description AD-26/AD-295 Non-Coin Control Door with Trim Less Locks (includes illus. nos. 1, 5, and 6) AD-26/AD-295 Non-Coin Control Door Only ADC Logo Only Logo Double Stick Tape Kit ACE® Lock Assembly Only ACE® Key Only (key number XX4451) AD-26/AD-295 Lower Control Door Trim #8 x 1/2" Phillips Pan Head "A" Screw



5

Dual Timer Control Door Assembly For Models Mfd. as of March 21, 1997

Illus. No.

6

Part No.

Qty.

1

881596

1

2 3 4

112350 870011 160040 160140

1 1 2 -

5 6 7

180315 150310 150300

1 5 4

Description AD-26/AD-295 Coin Control Door with Trim Less Locks (includes illus. nos. 1, 5, and 6) ADC Logo Only Logo Double Stick Tape Kit ACE® Lock Assembly Only ACE® Key Only (key number XX4451) AD-26/AD-295 Lower Control Door Trim #8 x 1/2" Phillips Pan Head "A" Screw Hex Washer TEK Screw American Dryer Corporation

450122-6

Dual Timer Control Door Assembly For Models Mfd. prior to March 21, 1997

Illus. No.

Part No.

Qty.

1

880773*

1

3 4

850415* 112350 870011 160040 160140

1 1 1 1 -

5 6

180315 150310

1 5

2

Description AD-26/AD-295 Coin Control Door with Trim Less Locks (includes illus. nos. 1, 5, and 6) AD-26/AD-295 Coin Control Door Only ADC Logo Only Logo Double Stick Tape Kit ACE® Lock Assembly Only ACE® Key Only (key number XX4451) AD-26/AD-295 Lower Control Door Trim #8 x 1/2" Phillips Pan Head "A" Screw



7

Single Coin Microprocessor Control Panel Assembly For Models Mfd. as of April 11, 1996

Illus. No. 1 2

8

Part No.

Qty.

3 4 5 6

112568 881163 881450 881451 150150 881143 150415 883353

1 1 1 1 1 1 1 1

7 8 9 10

883352 137216 152102 153010 150005

1 1 4 2 2

Description Single Coin Keyboard for Hanke Acceptor 25¢ Hanke Coin Acceptor with Optic 25¢ Canadian Coin Acceptor with Optic 0.880 Token Hanke Coin Acceptor with Optic 2.5 mm x 10 mm Stainless Steel Phillips Screw Hanke Optic Switch #10-16 x 1/2” Phillips Screw Control Panel Assembly Complete Less Acceptor (includes illus. nos. 1 and 5 through 10) Control Panel Only Phase 5 Coin Board M-3 Metric Hex Nut #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw American Dryer Corporation

450122-6

Single Coin Microprocessor Control Panel Assembly For Single Coin 25¢ Models Only

Illus. No. 1 2

Part No.

Qty.

112560 880887

1 1

4 5 6

880888 137216 824998 153010 150005 --------

1 1 1 2 2 1

7 8

137056 150309

1 1

3

Description AD-26/AD-295 Single Coin Keypad Label Only AD-26/AD-295 Single Coin Panel Control less Acceptor - 24 VAC (includes illus. nos. 1 through 5) AD-26/AD-295 Control Panel Only AD-26/AD-295 Phase 5 Microprocessor Controller Only Phase 5 Battery Clip Only #6 Star Washer #6-32 x 1/4" Phillips Round Head Machine Screw 25¢ Coin Acceptor Only (refer to 25¢Coin Acceptor Component Listing on page 13) Optical Switch Only #10-16 x 1/2" HH TEK Crimptite Screw

NOTE: Contact factory for export models. 450122-6


9

Dual Coin Microprocessor Control Panel Assembly For Export Models Only

Illus. No. 1 2

Part No.

Qty.

112560 880906

1 1

4 5 6

880904 137216 824998 153010 150005 --------

1 1 1 2 2 1

7 8

137056 150309

2 1

3

Description AD-26/AD-295 Dual Coin Keypad Label Only AD-26/AD-295 Dual Coin Panel Control less Acceptor - 24 VAC (includes illus. nos. 1 through 5) AD-26/AD-295 Dual Coin Control Panel Only AD-26/AD-295 Phase 5 Control Microprocessor Only Phase 5 Battery Clip Only #6 Star Washer #6-32 x 1/4" Phillips Round Head Machine Screw Dual Coin Acceptor Only (refer to Dual Coin Acceptor Component Listing on page 14and page 15) Optical Switch Only #10-16 x 1/2" HH TEK Crimptite Screw

NOTE: Contact factory for export models. 10


450122-6

Non-Coin Microprocessor Control Panel Assembly

Illus. No. 1 2

3 4 5 450122-6

Part No.

Qty.

112560 880905

1 1

880916 137216 824998 153010 150005

1 1 1 2 2

Description AD-26/AD-295 Dual Coin Twin-Keypad Label Only AD-26/AD-295 Non-Coin Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 5) AD-26 /AD-295 Non-Coin Control Panel Only Phase 5 Non-Coin Computer Board Only Phase 5 Battery Clip Only #6 Star Washer #6-32 x 1/4" Phillips Round Head Machine Screw Telephone: (508) 678-9000 / www.amdry.com

11

Microprocessor Control Box Assembly

Illus. No. 1 2 3 4 5 6 7** 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Part No. 150103 141403 151001 151000 136008 150002 136057 150002 120715 151000 122626 122705 122704 122625 137025 122631 122705 122704 122630 137025 150309 121010 132475 824828 150103 151001

Qty. 2 1 2 * * * * 2 1 2 1 11 11 1 1 1 3 3 1 1 1 1 1 1 4 4

Description #8-32 x 3/4" Phillips Round Head Machine Screw 24 VAC Transformer Only #8-32 Pal Nut #6-32 Pal Nut 3-Position Fuse Block #6-32 x 1" Phillips Round Head Machine Screw 1/2-Amp (Slo Blo) Fuse Only #6-32 x 1" Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut 15-Pin Socket Connector Only Socket Terminal Only Pin Terminal Only 15-Pin Socket Connector Only 6/15 Position Starin Relief ... Not Illustrated 6-Pin Socket Connector Only Socket Terminal Only Pin Terminal Only 6-Pin Connector Only 6/15 Position Starin Relief ... Not Illustrated #10-16 x 1/2" HH TEK Crimptite Screw L-70 Ground Lug 2-Pole Contactor RC Network with Connectors #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut

* For 115 VAC application quanityis 1 and for 208/230 VAC application quanity is 2. ** Check fuse rating for verification. 12


450122-6

25¢ Coin Acceptor Component Listing

Illus. No.

Part No.

Qty.

1 2 3

881930 154320 880800

1 1 1

4 5 6 7 8 9 10

125720 152016 150020 137056 137049 150020 150020 125715

1 2 1 1 1 1 1 1

11 12 13 14 15

125706 125704 125705 125703 150110

1 1 2 1 1

450122-6

Description AD-26/AD-295 25¢ Coin Acceptor Body Only #4-40 x 11/16" x 1" U-Bolt Only AD-26/AD-295 25¢ Coin Acceptor Lower Reject with Bracket Kit (includes illus. nos. 3 and 15) AD-26/AD-295 25¢ Coin Acceptor Lower Reject with Bracket Only #4-40 Hex Nut #4-40 x 5/16" Slotted Pan Head Machine Screw Optical Switch Only Optical Switch Mounting Bracket Only #4-40 x 5/16" Slotted Pan Head Machine Screw #4-40 x 5/16" Slotted Pan Head Machine Screw AD-26/AD-295 25¢ Coin Acceptor Upper Assembly Complete (includes illus. nos. 10 through 14) 3/16" Coin Acceptor Retaining Ring Only Coin Acceptor Spring Only Coin Acceptor Spacer Only Coin Acceptor Rod Only #8-32 x 1/4" Binding Head Phillips Machine Screw Telephone: (508) 678-9000 / www.amdry.com

13

Dual Coin Acceptor Component Listing For Export Models Only

Illus. No. 1

2

3 4

14

Part No.

Qty.

125726 881931 125738 881923 882054 125731 125737 881926 154320 880801

1 1 1 1 1 1 1 2 2 1

125721

1 1 1 1 1 1 1

Description $1 Canadian Coin Acceptor Body Only 1 English Pound (1£) Coin Acceptor Body Only 10 Danish Krone (10KR) Coin Acceptor Body Only 1 Dutch Guilder (1G) Coin Acceptor Body Only 25¢ Canadian Coin Acceptor Body Only 5 Belgian Franc (5BF) Coin Acceptor Body Only 5 Danish Krone (5KR) Coin Acceptor Body Only 25¢ Dutch Guilder Coin Acceptor Body Only #4-40 x 11/16" x 1" U-Bolt Large Lower Reject with Bracket Kit (includes illus. nos. 4 and 18) $1 Canadian Coin Acceptor Lower Assembly Only 50 English Pence (50P) Coin Acceptor Lower Assembly Only 1 English Pound (1£) Coin Acceptor Lower Assembly Only 20 Belgian Franc (20BF) Coin Acceptor Lower Assembly Only 5 French Franc (5 FF) Coin Acceptor Lower Assembly Only 10 Danish Krone (10KR) Coin Acceptor Lower Assembly Only 1 Dutch Guilder (1G) Coin Acceptor Lower Assembly Only American Dryer Corporation

450122-6

Dual Coin Acceptor Component Listing (continued) For Export Models Only

Illus. No. 5

6 7 8 9 10 11 12

Part No.

Qty.

880800

1

125720

880801

1 1 1 1 1

152016 150020 137056 137049 150020 150020 125716

4 2 2 2 2 2 1 1 1 1 1 1 1

13

125715

1 1 1 1

125716

1 1

14 15 16 17 18

450122-6

125706 125704 125705 125703 150110

2 2 4 2 2

Description Small Lower Reject with Bracket Kit (includes illus. nos. 5 and 18) 25¢ Canadian Coin Acceptor Lower Assembly Only 20 English Pence (20P) Coin Acceptor Lower Assembly Only 5 Belgian Franc (5BF) Coin Acceptor Lower Assembly Only 25¢ Dutch Guilder Coin Acceptor Lower Assembly Only Large Lower Reject with Bracket Kit (includes illus. nos. 5 and 18) #4-40 Hex Nut #4-40 x 5/16" Slotted Pan Head Machine Screw Optical Switch Only Optical Switch Mounting Bracket #4-40 x 5/16" Slotted Pan Head Machine Screw #4-40 x 5/16" Slotted Pan Head Machine Screw $1 Canadian Coin Acceptor Upper Assembly Complete (includes illus. nos. 12 and 14 through 17) 50 English Pence (50P) Coin Acceptor Upper Assembly Complete (includes illus. nos. 12 and 14 through 17) 1 English Pound (1£) Coin Acceptor Upper Assembly Complete (includes illus. nos. 12 and 14 through 17) 20 Belgian Franc (20BF) Coin Acceptor Upper Assembly Complete (includes illus. nos. 12 and 14 through 17) 5 French Franc (5FF) Coin Acceptor Upper Assembly Complete (includes illus. nos. 12 and 14 through 17) 10 Danish Krone (10KR) Coin Acceptor Upper Assembly Complete (includes illus. nos. 12 and 14 through 17) 1 Dutch Guilder (1G) Coin Acceptor Upper Assembly Complete (includes illus. nos. 12 and 14 through 17) 25¢ Canadian Coin Acceptor Upper Assembly Complete (includes illus. nos. 13 through 17) 20 English Pence (20P) Coin Acceptor Upper Assembly Complete (includes illus. nos. 13 through 17) 5 Belgian Franc (5BF) Coin Acceptor Upper Assembly Complete (includes illus. nos. 13 through 17) 25¢ Dutch Guilder Coin Acceptor Upper Assembly Complete (includes illus. nos. 13 through 17) 2 French Franc (2FF) Coin Acceptor Upper Assembly Complete (includes illus. nos. 13 through 17) 5 Danish Krone (5KR) Coin Acceptor Upper Assembly Complete (includes illus. nos. 13 through 17) 3/16" Coin Acceptor Retainer Ring Only Coin Acceptor Spring Only Coin Acceptor Spacer Only Coin Acceptor Rod Only #8-32 x 1/4" Binding Head Phillips Machine Screw


15

Dual Timer Control Panel Assembly

Illus. No. 1 2 3

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 --16

Part No.

Qty.

123005 122400 880774

1 1 1

880920 131917 150207 154001 152000 153010 120730 120713 150002 150110 150001 131931 151000 112050 150309 124103 124027 124028 122602 122700 122801

1 1 2 2 2 2 1 1 2 4 2 1 2 1 1 2 1 1 1 8 1

Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch - 24 VAC Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) AD-26/AD-295 Dual Timer Control Panel Only Push-to-Start Relay - 24 VAC #10-24 x 1/2" Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block (for models mfd. as of May 2, 1993) 18-Position Terminal Block (for models mfd. prior to May 2, 1993) #6-32 x 1" Round Head Machine Screw #8-32 x 1/4" Phillips Head Machine Screw #6-32 x 1/2" Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label Only #10-16 x 1/2" HH TEK Crimptite Screw Arrow Timer Knob 60-Minute Timer - 24 VAC 15-Minute Timer - 24 VAC 9-Pin Connector Only Pin Terminal Only Pin/Socket Extraction Tool American Dryer Corporation

450122-6

Non-Microprocessor Coin Control Panel Assembly

Illus. No.

Part No.

Qty.

1 2 3

123005 122400 880900

1 1 1

4 5 6 7* 8 9 10 11 12 —

880899 131917 150207 154001 125601 150303 120712 150415 122602 122700 122801

1 1 2 2 1 2 1 1 1 6 1

Description Red Indicator Light - 24 VAC Rocket Heat Selector Switch - 24 VAC Coin Meter Control Panel Assembly Complete Less Meter - 24 VAC (includes illus. nos. 1 through 6 and 8 through 12) Coin Meter Control Panel Only Push-To-Start Relay - 24 VAC #10-24 x 1/2" Phillips Round Head Machine Screw #10-24 Speed Nut 25¢ Coin Meter (Specify Timing) - 24 VAC #4 x 3/4" Pan Head "A" Screw 12-Position Terminal Block # 10-16 x 1/2" Phillips Round Head Crimptite Screw 9-Pin Male Connector Only Pin Terminal Only Pin/Extraction Tool

* Consult factory for coin meters not listed. 450122-6


17

Non-Microprocessor Control Box Assembly

Illus. No. 1 2 3 4 5 6 7 8** 9 10 11 12 13 14 15 16

Part No. 122603 122701 122801 315010 150300 150300 141403 136008 136057 150301 150002 120715 151000 132475 150103 151001 824828

Qty. 1 6 1 1 2 2 1 * * * 2 1 2 1 4 4 1

Description 9-Pin Socket Female Connnector Socket Terminal Only Pin/Socket Extraction Tool 9-Pin Connector Bracket #10 x 1/2" Hex Washer TEK Screw #10 x 1/2" Hex Washer TEK Screw 24Vac Transformer Fuse Block/Strip Only 1/2 Amp (Slo Blo) Fuse #8-18 x 7/16" Phillips Pan Head TEK Screw #6-32 x 1" Slotted Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut Motor Contactor #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut Filter Capacitor

* For 115 VAC application quanity is 1 and for 208/230 VAC application quanity is 2. ** Check fuse rating for verification. 18


450122-6

Main Door Assembly

Illus. No.

Part No.

Qty.

1

882991

1

2 3 4 5

800448 150410 152014 102349 102354 102210 170730

1 4 4 1 1 1 1

150431

1

6

7 450122-6

Description Black Main Door Assembly Complete (includes illus. nos. 1 and 5 through 7) 12-1/2" Stainless Steel Main Door Hinge #10-24 x 3/8" Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Plastic Main Door Gasket Only Stainless Steel Main Door Gasket Only 20-7/16" Door Glass Only Adhesive for Door Glass and Gasket (10.3 oz Cartridge) Main Door Latch Screw (#10 x 7/16" Dome Head Screw) Telephone: (508) 678-9000 / www.amdry.com

19

Main Door Switch Assembly

Illus. No.

20

Part No.

Qty.

1 2 3 4 5 6

152013 153008 137005 121028 154281 800448

2 2 1 2 2 1

7 8 9 10

153565 313218 150201 121405

2 1 2 1

Description #6-32 Hex Nut #6 Lock Washer Single Pole Door Switch Insulated Female Terminal 3/8" Standard Nylon Spacer 12-1/2" Stainless Steel Main Door Hinge inlcudes illus. nos. 6 and 7) #6 Clinch Stud Main Door Switch Housing Only #10-32 x 1/4" Phillips Pan Head TEK Screw Rubber Grommet American Dryer Corporation

450122-6

Coin Vault Assembly

Illus. No.

Part No.

Qty.

1* 2 3 4*

880118 880901 160036** 160136** 880117

1 1 1 1 1

5*

--------

1

6

152014

4

Description AD-26/AD-295 Coin Box Assembly Only Less Lock AD-26/AD295 Coin Box Faceplate Only ACE® Lock Assembly with Key ACE® Key Only AD-26/AD-295 Coin Vault Assembly Only Less Lock (includes illus. nos. 1, 4, and 6) AD-26/AD-295 Front Panel Assembly (refer to Coin Front Panel Assembly on page 22) #1/4-20 Free Spin Wash Nut

* Specify color when ordering. ** Specify key number when ordering. 450122-6


21

Coin Front Panel Assembly

Illus. No.

Part No.

Qty.

1*

880908

1

2 3 4 5

154215 170330 150309 121405

2 1 1 1

Description AD-26/AD-295 Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 5) 5/32 x 1/4" Pop Rivet Friction Door Latch #10-16 x 1/2" HH TEK Crimptite Screw Rubber Grommet



450122-6

Non-Coin Front Panel Assembly

Illus. No.

Part No.

Qty.

1*

880919

1

2 3 4 5

154215 170330 150309 121405

2 1 1 1

Description AD-26/AD-295 Non-Coin Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 5) 1/8" Pop Rivet Friction Door Latch #10-16 x 1/2" HH TEK Crimptite Screw Rubber Grommet



23

Lint Door Assembly

Illus. No.

Part No.

Qty.

1

880248*

1

880889* 160015 160104 160016 180316 150201 180315 150201 117604

1 1 1 1 1 5 1 5 7

2 3 4 5 6 7 8

Description AD-26/AD-295 Lint Door with Trim Less Locks (includes illus. nos. 1, and 4 through 8) AD-26/AD-295 Lint Door Only MK-100 Lock Assembly Only MK-100 Key Only Lock Cam Only AD-26/AD-295 Upper Door Trim #10-32 x 1/4" Phillips Pan Head TEK Screw AD-26/AD-295 Lower Door Trim #10-32 x 1/4" Phillips Pan Head TEK Screw 1/8” x 3/8” Neo.Sponge Tape (sold in feet)



450122-6

Lint Basket /Lint Switch Assemblies

Illus. No. 1*

Part No.

Qty.

880909

1

850827

1

2 3 4 5 6

117604 122116 122605 122701 880921

4 1 1 4 1

7 8 9

150301 122700 122604

4 8 2

Description AD-26 Lint Basket Assembly (includes illus. nos. 1 and 2) AD-295 Lint Basket Assembly (includes illus. nos. 1 and 2) Noise Suppressor Tape (sold by the foot) Lint Door Switch - 24 VAC 4-Pin Socket Connector Socket Terminal Only AD-26/AD-295 Lint Basket Switch Box Assembly (includes illus. nos. 3 through 6) #8-18 x 7/16" Phillips Pan Head TEK Screw Pin Terminal Only 4-Pin Connector Only



25

AD-26 Tumbler/Support Assemblies For Models Mfd. as of August 17, 1998

Illus. No. 1

Part No.

Qty.

800835

1

800718*

1

12

150415 301318 301317 150518 100916 153003 850066 152004 153002 153001 115999 401010 100139

30 2 1 1 3 3 1 3 3 3 1 1 1

13 14

115992 100802

1 1

2 3 4 5 6 7 8 9 10 11

Description AD-26 Tumbler and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11 and 13) AD-26 Tumbler Only without Felt Collars (includes illus. nos. 1, 2, and 3) #10-16 x 1/2" Phillips Round Head Crimptite Screw AD-26 Short Tumbler Rib Only AD-26 Tall Tumbler Rib Only #5/16-18 x 3/8" Socket Button Head Screw 3/8”-16 x 25" Tie Rod Only 3/8" x 1-1/2" Fender Washer Tumbler Support Only #5/16-18 Hex Nut 5/16" Lock Washer 5/16" Flat Washer Felt Collar Only #847 Adhesive for Felt Collar (5 ounce tube) 12-Rib 120" Poly "J" Belt (refer to 12-Rib 120" (J) Poly Belt Arrangement on page 41) Inner Ring Felt Collar Only 1-3/8" Retaining Ring

* Felt collars arenot included and must be ordered separately. 26


450122-6

AD-26 Tumbler/Support Assemblies For Models Mfd. prior to August 17, 1998

Illus. No. 1

Part No.

Qty.

800835

1

800718*

1

12

150415 301318 301317 150518 882051 153003 850061 152004 153002 153001 115999 401010 100139

30 2 1 1 3 3 1 3 3 3 1 1 1

13 14

115992 100802

1 1

2 3 4 5 6 7 8 9 10 11

Description AD-26 Tumbler and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11 and 13) AD-26 Tumbler Only without Felt Collars (includes illus. nos. 1, 2, and 3) #10-16 x 1/2" Phillips Round Head Crimptite Screw AD-26 Short Tumbler Rib Only AD-26 Tall Tumbler Rib Only #5/16-18 x 3/8" Socket Button Head Screw #5/16-18 x 25" Tie Rod Only 3/8" x 1-1/2" Fender Washer Tumbler Support Only #5/16-18 Hex Nut 5/16" Lock Washer 5/16" Flat Washer Felt Collar Only #847 Adhesive for Felt Collar (5 ounce tube) 12-Rib 120" Poly "J" Belt (refer to 12-Rib 120" (J) Poly Belt Arrangement on page 41) Inner Ring Felt Collar Only 1-3/8" Retaining Ring

* Felt collars arenot included and must be ordered separately. 450122-6


27

AD-295 Tumbler/Support Assemblies For Models Mfd. as of November 2, 1998

Illus. No. 1

Part No. 800832

Qty. 1

800892

800722*

1

800842*

1

12

150415 301315 301316 301414 301415 150518 882050 153001 850066 152004 153002 153001 116003 401010 100139

30 2 1 2 1 1 3 3 1 3 3 3 1 1 1

13 14

115992 100802

1 1

2 3

4 5 6 7 8 9 10 11

Description AD-295 Tumbler and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11 and 13) AD-295 Stainless Steel Tumbler and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11 and 13) AD-295 Tumbler Only without Felt Collars (includes illus. nos. 1, 2, and 3) AD-295 Stainless Steel Tumbler Only without Felt Collars (includes illus. nos. 1, 2, and 3) #10-16 x 1/2" Phillips Round Head Crimptite Screw AD-295 Short Tumbler Rib Only AD-295 Tall Basket Rib (Tumbler) Only AD-295Stainless Steel Short Tumbler Rib Only AD-295 Stainless Steel Tall Basket Rib (Tumbler) Only #5/16-18 x 3/8" Socket Button Head Screw #5/16-18 x 31" Tie Rod Only 5/16" Flat Washer Tumbler Support Only #5/16-18 Hex Nut 5/16" Lock Washer 5/16" Flat Washer Felt Collar Only #847 Adhesive for Felt Collar (5 ounce tube) 12-Rib 120" Poly "J" Belt (refer to 12-Rib 120" (J) Poly Belt Arrangement on page 41) Inner Ring Felt Collar Only 1-3/8" Retaining Ring

* Felt collars arenot included and must be ordered separately. 28


450122-6

AD-295 Tumbler/Support Assemblies For Models Mfd. prior to November 2, 1998

Illus. No. 1

Part No. 800832

Qty. 1

800892

800722*

1

800842*

1

12

150415 301315 301316 301414 301415 150518 882050 153001 850061 152004 153002 153001 116003 401010 100139

30 2 1 2 1 1 3 3 1 3 3 3 1 1 1

13 14

115992 100802

1 1

2 3

4 5 6 7 8 9 10 11

Description AD-295 Tumbler and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11 and 13) AD-295 Stainless Steel Tumbler and Support Assembly Complete with Felt Collars (includes illus. nos. 1 through 11 and 13) AD-295 Tumbler Only without Felt Collars (includes illus. nos. 1, 2, and 3) AD-295 Stainless Steel Tumbler Only without Felt Collars (includes illus. nos. 1, 2, and 3) #10-16 x 1/2" Phillips Round Head Crimptite Screw AD-295 Short Tumbler Rib Only AD-295 Tall Basket Rib (Tumbler) Only AD-295Stainless Steel Short Tumbler Rib Only AD-295 Stainless Steel Tall Basket Rib (Tumbler) Only #5/16-18 x 3/8" Socket Button Head Screw #5/16-18 x 31" Tie Rod Only 5/16" Flat Washer Tumbler Support Only #5/16-18 Hex Nut 5/16" Lock Washer 5/16" Flat Washer Felt Collar Only #847 Adhesive for Felt Collar (5 ounce tube) 12-Rib 120" Poly "J" Belt (refer to AD-26/AD-295 12-Rib 120" (J) Poly Belt Arrangement on page 41) Inner Ring Felt Collar Only 1-3/8" Retaining Ring

* Felt collars arenot included and must be ordered separately. 450122-6


29

Tumbler Brush Assembly

Illus. No. 1 2 3 4 5 6 7 8 30

Part No. 170196 317652 154210 120117 317650 102325 154210 100139

Qty. 2 2 6 2 1 1 2 1

Description AD-26/AD-295 Drive Belt Sealing Brush AD-26/AD-295 Sealing Brush Clip End 5/16" x 3/16" Pop Rivet 3/8" EMT Hanger AD-26/AD-295 Wrapper Gasket Strip 8-1/2" x 1-1/2" x 1/8" Wrapper Channel Gasket 5/32" x 3/16" Pop Rivet 12-Rib 120" Poly "J" Belt (refer to 12-Rib 120" (J) Poly Belt Arrangement on page 41) American Dryer Corporation

450122-6

Microprocessor Temperature Sensor Bracket Assembly

Illus. No.

Part No.

Qty.

1

880925

1

2 3 4 5 6 7

305016 150000 153010 130102 152013 154007 880251

1 2 2 1 2 2 1

122701 122605 122700 122604 122801 121405 881537

4 1 4 1 1 1 2

8 9 10 11 12 13 450122-6

Description AD-26/AD-295 Microprocessor Temperature Sensor Bracket Assembly Complete (includes illus. nos. 1 through 9, 12, and 13) AD-26/AD-295 Temperature Sensor Bracket Top Only #6-32 x 1/4" Round Head Machine Screw #6 Star Washer 190º Large Thermostat Only #6-32 Hex Nut 1/4" Tinnerman Push-On Fastener 1/4" Temperature Sensor Probe Assembly (includes illus. nos. 6 through 9) Socket Terminal Only 4-Pin Socket Connector Only Pin Terminal Only 4-Pin Connector Only Pin/Socket Extraction Tool Rubber Grommet Tinnerman "S" Clip Telephone: (508) 678-9000 / www.amdry.com

31

Non-Microprocessor Temperature Sensor Backet Assembly

Illus. No.

32

Part No.

Qty.

1

880907

1

2 3 4 5 6 7 8 9 10 11 12 13 14

153010 150005 130106 152000 840065 840062 130100 130111 130105 122701 122605 122604 122700

5 5 1 5 1 1 1 1 1 4 1 1 4

Description AD-26/AD-295 Non-Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 12) #6 Star Washers #6-32 x 1/4 Round Head Machine Screw Large 170º Thermostat Only #6-32 Hex Nut Sensor Jumper Sensor Bracket Harness Large 150º Thermostat Only Large 130º Thermostat Only Large 100º Thermostat Only Socket Terminal Only 4 -Pin Socket Connector 4-Pin Conector Pin Terminal Only American Dryer Corporation

450122-6

Sail Switch Assembly

Illus. No. 1 2

3 4 5 6 7 8 9 10 450122-6

Part No.

Qty.

150301 802800

2 1

802801

1

154004 150415 802799 122200 150303 105500 319206 154002

1 2 1 1 2 1 1 1

Description #8-18 x 7/16" Phillips Pan Head TEK Screw Sail Switch Box with Cover and Bracket Only (includes illus. nos. 2, 4, and 5) Sail Switch Box Assembly Complete (includes illus. nos. 2 through 10) Twin Speed Nut #10-16 x 1/2" Phillips Round Head Crimptite Screw Sail Switch Box Cover and Bracket Only Sail Switch Only #4 x 3/4" Pan Head "A" Machine Screw Sail Switch Actuator Rod Sail Switch Damper (embossed) 1/8" Push-on Fastener Telephone: (508) 678-9000 / www.amdry.com

33

Tumbler Bearing Assembly

34


450122-6

Tumbler Bearing Assembly

Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Part No.

Qty.

880203 153005 152005 150508 153005 152005 150600 153004 153005 152005 150501 153002 153001 150621 152004 801101

1 4 4 2 2 2 2 2* 2 2 4 4 4 2 2 1

801103

1

17 18

801105 801104 880202 880779

1 1 1 1

19 20 21

152004 150610 824807

2 2 1

Description 1-3/8" Flange Bearing Only 3/8" Lock Washer #3/8-16 Hex Nut #3/8-16 x 3/4" Hex Head Machine Bolt 3/8" Lock Washer #3/8-16 Hex Nut #3/8-16 x 1-1/2" Hex Head Machine Bolt 3/8" Flat Washer 3/8" Lock Washer #3/8-16 Hex Nut #5/16-18 x 3/4" Hex Head Machine Bolt 5/16" Lock Washer 5/16" Flat Washer #5/16-18 x 1-1/2" Hex Head Machine Bolt #5/16-18 Hex Nut 1-3/8" Bearing Box Assembly Complete (includes illus. nos. 4 through 20) For models mfd. without Rotational Sensor 1-3/8" Bearing Box and Support Assembly Only (includes illus. nos. 4, 5, 6, 16, and 17) 1-3/8" Bearing Box Only 1-3/8" Pillow Block Bearing Support Only 1-3/8" Pillow Block Bearing Only 1-3/8" Pillow Block Bearing Assembly with Magnet (for models mfd. with Rotational Sensor) #5/16-18 Hex Nut #5/16-18 x 1-1/2" Allen Set Screw Rotational Sensor Assembly

* Some models require a quanity of 4.

450122-6


35

Totally Enclosed, Non-Vent Motor/Idler Assemblies

Illus. No. 1 2 3 4 5 6

7 8 9 36

Part No.

Qty.

152006 153050 100702 100604 117684 880890 880893

2 1 1 1 4 1 1

880894

1

100099 100054 153001 153002

1 1 4 4

Description 1/2-20 Left Hand Jam Nut 1/2" S.A.E. Flat Washer 1/8" x 1/8" x 1-1/2" Key Impellor (Fan/Blower) Only Noise Suppressor Tape (sold in feet) AD-26/AD-295 Motor Mount Only AD-26/AD-295 Motor Mount Assembly Complete - 60 Hz Models Only (includes illus. nos. 1 through 10 and 14 through 18) AD-26/AD-295 Motor Mount Assembly Complete - 50 Hz Models Only (includes illus. nos. 1 through 10 and 14 through 18) 1/2 HP 115/208-230/60 Hz/1ø T.E.N.V. Motor with Plug 1/2 HP 115/208-230/50 Hz/1ø T.E.N.V. Motor with Plug 5/16" Flat Washer 5/16" Lock Washer American Dryer Corporation

450122-6

Totally Enclosed, Non-Vent Motor/Idler Assemblies (continued)

Illus. No. 10 11

Part No.

Qty.

15 16 17 18 19

154279 122701 122801 137030 100173 101097 101099 154327 101096 153024 150217 880922

4 * 1 1 1 1 1 1 1 1 1 1

20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

880895 153005 153004 153005 152005 802203 153007 150112 152002 153018 153007 157010 154278 150600 100251 100429 170359 152000 153008 150001

1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2

12 13 14

Description #5/16-18 x 3/4" Carriage Bolt Socket Termianl Only Pin/Socket Extraction Tool 8-Pin Housing 12-Rib 120" Poly "J" Belt Rear Motor Shaft Bushing (for 60 Hz Models Only) Rear Motor Shaft Bushing (for 50 Hz Models Only) Rear Bushing Set Screw Front Motor Shaft Bushing Only #10 Lock Washer #10-32 x 3/4" Phillips Round Head Machine Screw Idler Assembly Complete (includes illus. nos. 19 through 38) Idler Plate Angle Assembly Only #3/8-16 x 3-3/8" Spade Bolt 3/8" Flat Washer 3/8" Lock Washer #3/8"-16 Hex Nut Idler Plate 1/4" Lock Washer #1/4-20 x 1 1/4" Hex Head Bolt #1/4-20 Hex Nut 1/4" Flat Washer 1/4" Lock Washer 1-7/8" Extension Spring #5/16-18 x 5/8" Shoulder Screw #3/8-16 x 1/2" Hex Head Bolt Idler Pulley Only Idler Pivot Sleeve Nylon Spacer #6-32 Hex Nut #6 Lock Washer #6-32 x 1/2 Round Head Machine Screw

* As required.

450122-6


37

Upshot Burner Assembly

38


450122-6

Upshot Burner Assembly Illus. No. 1 2 3 4 5 6 7

Part No.

Qty.

8 9 10 11

881372 141303 143001 142700 142500 142812 128927 140411 318700 150300 141238 --------

1 1 1 1 1 1 1 1 1 2 1 1

12 13

880891 880892

1 1

141130 141131

1 1

152001 150300 820100 882627 152000 153010 150301 318083 150300 880923

2 2 1 1 4 4 2 1 4 1

880924

1

318076 150300 319706 130401 150301 141109 128918 128917 150315 318009 --------

1 4 1 1 1 1 1 1 2 1 1

14 15 16 17 18 19 20 21 22 23

24 25 26 27 28 29 30 31 32 33 ---

450122-6

Description Straight Shut-Off 1/2" Union Tail Piece 1/2" Coupling Close Nipple 1/2" x 90º Elbow 1/2" x 3" Nipple 1/2" 24 VAC DSI Redundant Valve (natural gas) 1/2" Valve Conversion Kit (liquid propane) Pipe Bracket #10 x 1/2" Hex Washer TEK Screw 1/2" Manifold Burner Orifice (refer to Upshot Burner Orifice Listing on page 42) AD-26/AD-295 Burner Front and Back Bracket ADG-26/ADG-295 Upshot Burner Tube Assembly (includes illus. nos. 13 and 30 through 33) Tube Only Tube and Spreader (includes item no. 29) #8-32 Hex Nut #10 x 1/2" Hex Washer TEK Screw DSI Mounting Bracket ADC DSI Module Only (50/60 Hz) 6-32 Hex Nut #6 Star Washer #8-18 x 7/16" Phillips Pan Head TEK Screw Outer Burner Baffle #10-32 x 1/2" Hex Washer Tek Screw ADG-26 Burner Box Assembly (includes illus. nos. 23 through 26) ADG-295 Burner Box Assembly (includes illus. nos. 23 through 26) Burner Box Cover #10 x 1/2" Hex Washer TEK Screw Hi-Limit Bracket 330º Hi-Limit Only #8-18 x 7/16" Phillips Pan Head TEK Screw Flame Spreader Flame Sensor Spark Electrode with High Voltage (HV) Wire #6 x 3/8" Phillips Pan Head "B" Screw PSE Burner Tube Bracket Conversion Kit (refer to L.P. Conversion Kit Listing on page 42)


39

Back Guard Assembly

Illus. No.

Part No.

Qty.

1 2 3 4 5

150301 314408 150300 318065 312530* 312537* 150301*

6 1 8 2 1 1 11

6

Description #8-18 x 7/16" Philips Pan Head TEK Screw AD-26/295 Back Guard #10 x 1/2" Hex Washer TEK Screw AD-26/295 Clean Out Plate AD-26 Outer Top AD-295 Outer Top #8-18 x 7/16” Phillips Pan Head TEK Screw

* Items not shown in drawing. 40


450122-6

12-Rib 120" (J) Poly Belt Arrangement

450122-6


41

Upshot Burner Assembly Specifications

Upshot Burner Orifice Listing* Model Number

Qty.

ADG-26D @ 60 Hz ADG-26D @ 50 Hz ADG-295D @ 60 Hz ADG-295D @ 50 Hz

1 1 1 1

Natural Gas D.M.S. Part No. #26 #29 #23 #28

140823 140820 140856 140821

L.P. Gas D.M.S. Part No. #43 #46 #42 #44

140809 140806 140810 140808

* Consult factory for elevations over 2,000 feet.

L.P. Conversion Kit Listing* Model Number ADG-26D @ 60 Hz ADG-26D @ 50 Hz ADG-295D @ 60 Hz ADG-295D @ 50 Hz

Kit Part Number 874061 880932 880782 880933

* Consult factory for elevations over 2,000 feet.

42


450122-6

Additional Parts Available

Part No.

Description

114006 114533 112280 114001 112534 120802 120902 120903 121014 121499 121500 122804 404500 404502 404506 404507 410001

“Warning - Fire Hazards” Label “120v Electric Service” Label “Super 30 Lint Screen” Label “Lint Screen” Label “Phase 5 Non-Coin Program Location Summary” Label Red Butt Connector #74B Wire Nut Crimp-on Wire Nut 1/4" Insulated (female) Terminal 4" Harness Tie 7" Harness Tie Hydroguage, 15" Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Almond "B" Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint 1/2" Allen Wrench

450122-6


43

ADC 450122

6 - 04/19/05-0