Combi Ninna Nanna PA-138V

Combi Ninna Nanna PA-138V Soft carrier for cradling, cuddling and back-carrying

Instruction Manual Please read the user guide and use accordingly. After reading, store the user guide properly for future reference. Also attach this user guide when giving the product to the others. Head support is only used after baby's neck muscle has developed. Store properly at a safe place if removed from pocket. *Head support is stored inside pocket in sales package.

Before use

For safe use of our product

Before use Thank you for purchasing Combi Ninna Nanna PA-138V baby soft carrier. This product is a generic single-baby carrier designed for cradling, cuddling or back-carrying a baby during shopping or outdoor activities. Before use, please read "Name of parts" in P.5 and check out the parts. ● This product can be used for cradling, cuddling or back-carrying a baby. Age reference for applicable baby (Baby's body size may vary according to different growing speed.)

Caution and using conditions mentioned below are very important. Please read and follow accordingly.

WARNING Improper operation may directly cause death or severe damage.

Cradling New born

Caution about safety The caution items mentioned here are about how to use the product properly and safely so as to prevent any possible injury to user and baby and any damage to the product. Moreover, the caution items are categorized according to the degree of injury and damage to the product which are indicated as "warning" and "caution" respectively.

Until neck muscle has developed

CAUTION

Weight : below 7.0kg

Improper operation may cause injury or damage to the product.

Age reference: from birth to around 4 months (neck muscle has developed)

Details of the caution item is written inside the frame.

Cuddling after neck muscle has developed

Up to around 12 months (11.3kg)

Weight : below 11.3kg Age reference: after neck muscle has developed up to around 12 months.

Back-carrying after neck muscle has developed

Up to around 30 months (14.9kg)

Weight : below 14.9kg Age reference: after neck muscle has developed up to around 30 months. Applicable waist size for user ranges from 55~110cm. Particular babies in bigger body size may not fit for soft carrier in winter times when wearing thicker clothes. Please choose clothes for baby carefully before using the soft carrier.

1

This sign indicates there is a warning or caution item. This sign indicates there is a prohibited action.

Make sure to secure the following parts when use. Otherwise baby may fall off from carrier accidentally while in use. < Cradling >

Head guard hook (2, left and right)

• Head guard hook (2, left and right) • Side lock, Side snap • Safety buckle ※Please attach cradling support seat to use.

Please try as much as possible to tighten the following belts. Any gap in between baby and user may cause baby to fall off from the carrier while in use. • Safety belt • Waist belt

Before use

WARNING

Side lock, Side snap

< Cradling >

< Cuddling >

Safety buckle Waist belt

< Cuddling > • Side lock, Side snap • Safety buckle • Combi buckle Safety belt Side lock, Side snap

Safety buckle

Combi buckle

Waist belt

Safety belt

< Back-carrying >

< Back-carrying > • Waist buckle • Side lock, Side snap • Safety buckle

Waist buckle Side lock, Side snap

Safety buckle

Waist belt

Safety belt

2

Before use

WARNING Please seat or unseat baby at a safe place (a third party aid preferred) to avoid the baby may falling off accidentally.

When the carrier is in use, please do not run, jump, lean forward for more than 45 degree, or lean to the side. Otherwise, baby may accidentally fall off from the carrier.

In cradle or cuddle position, always support baby with your hands. Baby's unexpected movement may cause it to fall off from the carrier.

Cradle position is not applicable to the following babies. ● Baby weighing more than 7.0kg. ● Baby whose head protrudes out of head guard when seated. ● Baby who can turn around itself without aid. Failure to do so may cause injury to baby.

In cradle position, make sure baby's head is in a higher position than its feet, and do support the baby's head with one hand. Improper cradling may exhaust the baby or become cause of injury.

Cuddling is not applicable to baby whose neck muscle is not yet developed, or otherwise may exhaust the baby or become cause of injury.

Head guard

3

Remove "Cradling support seat" when cuddling baby. Otherwise the support seat may press on baby's head.

Release the "adjustment zipper" to use when there is a gap of more than 4cm in between baby's armpit and the safety belt. Otherwise baby may fall off the carrier while in use.

Do not try to unpick stitched belt ends or re-structure the product. Otherwise, damage or accident may be caused while in use.

Please do not use the carrier continuously for more than 2 hours, or within 30 minutes after breastfeeding. Otherwise, unexpected burden will be inflicted to user or baby. Also, please stop using the carrier immediately in case of any pain and uncomfort.

Stop using the product immediately in case of any damage of product is found.

Please do not leave the product near a raw fire or unattended outdoor. Otherwise, buckles or other fabric parts may be deteriorated by heat or rain which may in turn become cause of accidents.

Please do not use this product for the purposes other than those advised by this manual to avoid any damage to the product.

Before use

CAUTION

Safety belt

4

Before use

Name of parts Head support (Detachable)

Hook attachment ring (female) ● For attachment of cradling support seat and head support.

● Stored inside pocket

Safety belt Head support hook (male) Combi ladder buckle(1)

Shoulder belt

● For adjustment of safety belt

Safety buckle

Cradling support seat attachment hook

Pocket Velcro (female) Adjusting zipper

Adjusting snap

● To be used according to growth stage. Release to deepen the seat.

Side lock

Combi buckle

Side snap

● For cuddling. To be stored when back-carrying or cradling.

Waist belt Combi ladder buckle (2) ● For adjustment of waist belt

Cradling support seat

Waist buckle ● Used in backcarrying

● Waist belt is made twisted to fit baby.

Velcro (male) Head guard

Head guard hook (male)

Crotch snaps

Attachment snap

Crotch snap

ANYO RAKU RAKU pad

5

※Pocket shape varies according to models.

Cradle position

Preparation for cradling Adjust waist belt length Before seating baby, carry the soft carrier along the shoulder as illustrated and adjust waist belt with Combi ladder buckle ➁. Combi buckle should be in open position and stored inside shoulder strap.

● To adjust Release crotch snap and pull out waist belt and Combi ladder buckle ➁. Lift the end of Combi ladder buckle ➁ and adjust waist belt length. Waist belt is made twisted to better fit user's body. Twisted Combi ladder buckle ➁

Waist belt Or

Crotch snap

Shoulder strap

Combi buckle

Store belt ends and buckles inside inner side of crotch snap and secure crotch snap.

It is recommended to set baby's head close to parent's heart position. After putting on shoulder strap, shorten the side closer to the user and baby can be cradled in a better balanced position.

(from birth until neck muscle developed)

Combi ladder buckle ➁

6

Cradle position

To seat baby whose neck muscle is yet to develop

1 Release the safety buckle Safety buckle

the side snap and side 2 Release lock.

the baby 3 Seat Open carrier at a safe place and seat

To release side lock, slide the side lock male toward the bigger end of the side lock female.

baby inside. Make sure baby's head is not leaning too tight against head guard.

Side lock male

Side snap Side lock female

(from birth until neck muscle developed) 7

Check if the carrier fits baby 6 Put 2 adult fingers in between carrier and baby and adjust belt length with safety buckle and Combi ladder buckle ① in case of feeling too loose or too tight.

Adjust the left and right belt to the same length

the head guard 7 Set Secure left and right head guard hooks to hook attachment rings on shoulder strap.

Same length Head guard hook

Around 2 fingers

Adjust safety belt regularly according to different growth stages.

side lock and side snap 4 Secure To secure side lock, place the side lock male into the bigger opening on side lock female and slide upward to secure it. (Refer to step 2)

safety buckle 5 Secure Secure safety buckle until heard the "click" sound.

Click Side lock

Click

Safety buckle

Side snap

To secure head guard hooks Lift head guard hook and place it above hook attachment ring. Press the front end of the hook until it clicks into place. Hook attachment ring

Check to make sure "side lock", "side snap" and "safety buckle" are secured to prevent baby from accidentally falling off while in use.


WARNING

Cradle position

If baby's head is being pressed by head guard, seat baby deeply as much as possible into the seat.

Head guard hook

8

Cradle position

To cradle baby whose neck muscle is yet to develop Advice

In case of baby with smaller body size, it is recommended to secure the adjustment zipper and apply the cradling support seat to use. (Adjustment zipper is normally open in cradle position.)

and cradle baby 1 Seat Put on shoulder strap across shoulder as shown.

baby with hands 2 Support Use hands to support baby's head and hip.

Belt is regarded too long if the illustrated angle of the supporting hand is bigger than 90 degree. Re-adjust the length with Combi ladder buckle ➁ on the waist belt.

90 degree

(from birth until neck muscle developed) 9

It is recommended to set baby's head close to parent's heart position. After putting on shoulder strap, shorten the side closer to the user and baby can be cradled in a better balanced position.

WARNING In cradle position, make sure baby's head is in a higher position than its feet, and do support the baby's head with one hand. Improper cradling may exhaust the baby or become cause of injury.

When cradling baby by your own, it is recommended to operate in front of a mirror to check if baby's head is on the lower side.

down baby and then put off 1 Put shoulder strap Support baby with hands and put down baby at a safe place. Put off shoulder strap.

the left and right head 2 Release guard hooks

Head guard hooks

To release head guard hook Lift the head guard hook to the outer side. Press on the front end of head guard hook with a thumb and then slide the hook attachment rings to the side to release it.

Hook attachment rings

Safety buckle

side lock, side snap and 4 Release then unseat baby.

Side lock

Side snap


3 Release safety buckle

Head guard hooks

Cradle position

To unseat baby from cradle position

10

Cradle position (from birth until neck muscle developed) 11

To remove cradling support seat Cradling support seat is already attached while in sales package. Follow the steps below to remove cradling support seat for washing, or when changing to use in cuddle position.

1 Release 2 crotch snaps

2 Release Velcro on pockethooks. Pocket

3 Release attachment snapR Attachment snaps

Crotch snaps

Cradling support seat

Velcro on ANYO RAKU 4 Release RAKU padard hooks.

Velcro

on the upper side of seat pad 5 Hold and pull it out

ANYO RAKU RAKU pad To attach cradling support seat

Velcro

WARNING When attaching cradling support seat, please make sure attachment snaps and crotch snaps are secured to prevent baby from accidentally falling off while in use.

Reverse the above steps to attach cradling support seat. (Step 5 ➜ Step 1) Before securing crotch snaps, tighten the waist belt and place the belt ends and buckles properly.

Advice

There are 2 ways to cuddle a baby¨: ① seating baby first before putting on carrier, or ➁ putting on carrier first before seating baby. Please choose whichever way that suits your need.

Adjust theadjustment waist belt zipper. Adjust the seatlength depthof with ● Close adjustment zipper to use When baby is still small and there is not much gap in between baby's armpit and safety belt, close adjustment zipper and secure adjustment snap to use. (For baby below 6 months)

Apply head support

● Open adjustment zipper to use When there is a gap of 4cm or more in between baby's armpit and safety belt, release the adjustment snap and adjustment zipper to use.

● Remove cradling support seat after baby's neck muscle has developed, and replace it with head support. (Baby whose neck muscle has developed can use head support up to around 7 months)

Cuddle position

Preparation for cuddling

Head support Adjustment zipper

Adjustment snap

4 cm

WARNING

※ Release the adjustment zipper to use in cradle position.

It is dangerous to keep the adjustment zipper close even when there is a gap of more than 4cm in between baby's armpit and safety belt since baby may fall off from carrier while in use.

If safety belt is too tight against baby's armpit even when adjustment zipper is closed, put few pieces of napkin or towel on the seat before seating the baby to raise baby's sitting position.

Attached status ※Head support is washable.

(After neck muscle developed up to around 12 months)

Safety belt

12

Cuddle position

Preparation for cuddling

Seating baby before putting

Adjust waist belt length Adjust waist belt length with Combi ladder buckle ➁ to fit user before seating baby. Combi ladder buckle➁

Seat baby at a safe place.

Side lcok

Waist belt is made twisted to better fit user's body. Secure Combi buckle

(After neck muscle developed up to around 12 months) 13

baby into carrier and secure 1 Seat side lock and side snap

Waist Belt

Side snap

Twisted Click

WARNING

Or

● To adjust Lift the end of Combi ladder buckle and adjust waist belt length.

➁

Combi ladder buckle ➁ WARNING Try to tighten waist belt as much as possible to prevent baby from accidentally falling off the carrier.

Make sure to adjust the waist belt such that belt ends on both sides are in same length.

• Check to make sure "side lock", "side snap" and "safety buckle" are secured to prevent baby from accidentally falling off while in use. • Try to tighten "safety belt" and "waist belt" as much as possible to use. A carrier that is too loose or a carrier of which belt ends are in different length may cause baby fall off the carrier upon its sudden and unexpected movement. • Seat baby at a safe place. (It is recommended to have a third person to assist the operation.) Seating or unseating baby at an unsafe place may cause baby to fall off from the carrier.

safety buckle head support 2 Secure 3 Secure Secure the safety buckle until a "click" Secure head support hooks onto the hook sound is heard. Safety buckle Click

attachment ring on shoulder belt. (Baby whose neck muscle has developed can use head support up to around 7 months) Head support

Head support hooks

To secure head support hooks Lift head support hook and place it above hook attachment ring. Press the front end of the hook until it clicks into place.

Hook attachment ring

Cuddle position

on carrier

Head support hook

Combi buckle carrier to fit user 4 Secure 5 Adjust Lean forward, put on shoulder strap and Try to adjust waist belt such that left and secure Combi buckle at the back until a "click" sound is heard. Shoulder strap Secure Combi buckle

right belt end are in same length. Set shoulder strap, waist belt and Combi ladder buckle properly. Waist belt

Secure waist belt to the back if waist belt end is too long.

Click

It is suggested to place baby on a bed first and then lean forward to the baby for operation.

When waist buckle is not used, secure it as shown or leave it open.

Refer to "To seat baby whose neck muscle is yet to develop" (P.7~8) for how to secure side lock, side snap and safety buckle, and also the way to adjust safety belt length.



14

Cuddle position (After neck muscle developed up to around 12 months) 15

Putting on carrier before seating baby WARNING • Make sure "side lock", "side snap" and "safety buckle" are secured to prevent baby from accidentally falling off while in use. • Try to tighten "safety belt" and "waist belt" as much as possible to use. A carrier that is too loose or a carrier of which belt ends are in different length may cause baby fall off the carrier upon its sudden and unexpected movement. • Seat baby at a safe place. (It is recommended to have a third person to assist the operation.) Seating or unseating baby at an unsafe place may cause baby to fall off the carrier. Refer to Step 4, 5 and 6 of "To seat baby whose neck muscle is yet to develop" (P.7~8) for how to secure side lock, side snap and safety buckle, and also the way to adjust safety belt length.

on carrier 1 Put Put on shoulder strap and cross hands

baby into carrier 2 Seat User should sit down first. Seat baby into

to the back to secure Combi buckle until a "click" sound is heard..

carrier from either side while holding the baby with on hand.

Secure Combi buckle

Click

safety buckle 4 Secure Secure safety buckle until a "click" sound is heard.

Safety buckle

head support 5 Secure Secure head support hooks onto the hooks attachment ring on shoulder strap. (Baby whose neck muscle has developed can use head support up to around 7 months) Head support

Head support hooks

Click

Hook attachment rings Refer to "To secure head support hooks" (P.14) for detailed operation.

Side lock

To unseat baby from cuddle position Combi buckle baby on a safe place and 1 Release 2 Place Sit on a safe place. Support baby with release head support one hand and release Combi buckle

Lift the head support hook to the outer side. Press on the front end of head support hook with a thumb and then detach the hook attachment ring.

Release Combi buckle Side snap


Head support hook


side lock, side snap and 4 Release unseat baby.

Safety buckle Waist belt

Side lock

Side snap


carrier to fit user 6 Adjust Try to adjust waist belt such that left and right belt end are in same length. Set shoulder strap, waist belt and Combi ladder buckle properly.

Cuddle position

3 Secure side lock and side snap.

16

Back-carry position (After neck muscle developed up to around 30 months) 17

Back-carrying

Preparation for back-carrying Advice

As baby is not seen in back-carry position, it is recommended to unseat baby and check baby's status once every 30 mins.

Adjust waist belt length Store Combi buckle into shoulder strap and adjust waist belt with Combi ladder buckle ➁ to fit user.

● To adjust Lift the end of Combi ladder buckle and adjust waist belt length.

Shoulder strap Waist belt Or

Combi ladder buckle ➁

Combi buckle

Waist belt is made twisted to better fit user's body.

• Make sure "side lock", "side snap" and "safety buckle" are secured to prevent baby from accidentally falling off while in use. • Try to tighten "safety belt" and "waist belt" as much as possible to use. A carrier that is too loose or a carrier of which belt ends are in different length may cause baby fall off the carrier upon its sudden and unexpected movement. • Seat baby at a safe place. (It is recommended to have a third person to assist the operation.) Seating or unseating baby at an unsafe place may cause baby to fall off from the carrier.

WARNING Please try to tighten waist belt as much as possible to use. After adjustment, Combi ladder buckle ➁ should be located at around upper waist of user. If the gap between user and baby is too large or too loose, it may cause baby to fall off carrier while in use. Try to adjust waist belt such that left and right belt end are in same length.

Twisted

WARNING

Refer to step 4, 5 and 6 of "To seat baby whose neck muscle is yet to develop" (P.7~8) for how to secure side lock, side snap and safety buckle, and also the way to adjust safety belt length.

Side lock

safety buckle 2 Secure Secure safety buckle until a "Click" sound is heard. Safety buckle Click

Side snap

to assist the operation.

Try to place the baby on a sofa and hold the upper end of shoulder belt when operating on your own.

carrier to fit user 5 Adjust Try to adjust waist belt such that left and

hook attachment rings on the shoulder belt. Head support

Head support hook


6 Secure waist buckle

right belt end are in same length. Set shoulder belt, waist belt and Combi ladder buckle ➁ properly.

Waist belt

Waist buckle


baby on the back 4 Carry It is recommended to have a third person

Refer to "To secure head support hooks" (P.14) for detailed operation.

the head support 3 Set Secure the head support hooks onto the

Back-carry position

baby into carrier. Secure side 1 Seat lock and side snap

18

Back-carry position (After neck muscle developed up to around 30 months) 19

To unseat baby from back-carry position

1 Release waist buckle

2 Unload carrier from back

baby on a safe place and 3 Place release head support Lift the head support hook to the outer side. Press on the front end of head support hook with a thumb and then detach the hook attachment ring.


Waist buckle


side lock, side snap and 5 Release then unseat baby.

Side lock Safety buckle

Side snap

Head support hook

Daily maintenance Use water or warm water to wash carrier. After washing, lay it flat on shaded area to dry. Use a piece of damp cloth to wipe off small dirt.

CAUTION When saliva of baby is adhered to the fabric, please clean it as soon as possible to avoid the fabric from becoming hardened. Hardened fabric may inflict discomfort to the baby.

Caution about washing Wash carrier separately from other colored items to prevent decoloring. Do not soak carrier in water for a long time. Do not use bleach or fluorescent brightener as both of which may become potential discomfort to baby. It is recommended to use Combi's detergent series.

Do not put carrier into washing machine, spinning machine or drying machine, all of which may cause damage to buckle.

Maintenance

Maintenance

Washing symbol

Material Main parts Product color Smart Black Cool Grey Champaign Beige Chocolat Red

Outer fabric

Polyester Cotton

Mesh

Inner fabric

Belt

Buckle

Cotton

Polyester

Polyacetal

Polyester

20