CrankStar - Thielenhaus Microfinish

7 downloads 188 Views 2MB Size Report
7. CrankStar discover the CrankStar ve in 3d augmented reality (ar) with your android or ipad tablet! point your device'
TechnologieHigh Microfinish pour tous types d‘arbres precision crankshafts

CrankStar compact – ergonomic – intelligent

CrankStar

2

CrankStar

eXtreMe preCiSion CrankSHaFtS tHrougH MiCroFiniSH/SuperFiniSH Just to overcome internal friction, the average car burns 340 liters (90 gallons) of fuel per year. With increasing demand for high performance, fuel economy and sustainability, crankshafts must perform better than ever before. Compact design, high-precision journals (mains & pins) and sealing seats are key to their performance and lifespan. the CrankStar ve high-precision surface finishing machine provides manufacturers with the ability to meet our modern-day challenges. through the highly efficient and cost-effective MiCroFiniSH/Superfinish process surface friction can be significantly reduced and excellent sealing capacity provided.

©Mixage

MaCHining taSk Surface finish

geometry

dimensional accuracy

pin bearing

thrust faces Flange

(Front journal)

Main bearing

(deburring of flange bores)

optional: deburring of flange, machining of front journal

CrankStar

CrankStar Advantages Narrow finishing units for machining of shafts with minimal journal distances (33 mm) Cutting-edge tape management system with tape-feed, -end and –tear detection Long intervals between tape change due to extra-large tape rolls (200 m for vertical layout) Hard or soft tape contact shoes (or combination) depending on requirements Short and easy change-over due to excellent front access FEM optimized rigidity Simple integration into production lines via shuttle, palette or other automated systems

3

4

CrankStar

Component Specifications Center distance: 300 – 600 mm Rotating diameter: max. 210 mm Stroke: max. 110 mm Cast iron and steel

Configuration Options FEM-optimized design



Single-part or series production

Integration in production lines

Single or multi-step machining



Shuttle, gantry and other loading options



CrankStar

Accessories Fully automatic pitch-distance adjustment

Fully automatic adjustment of main bearing units



Service monitoring via profinet



Shuttle or gantry loading system



Peripheral systems such as filter system, oil-mist suction etc.

Energy-efficient components / layout*

*Upon request various peripheral systems can be equipped with frequency-controlled drives which require up to 45% less energy and help reduce CO2 emissions.

5

6

CrankStar

Technical Data Crankstar Number of work stations

1

Max. number of finishing units

23

Number of NC Axes

5

Power input Machine weight

15 kW approx. 9.5 t

Control System

840 Dsl

Service Production Support / Training Process development and analysis

24 hour hotline and online direct service

Inspections, repairs, refurbishments

CrankStar

Crankstar app Discover the CrankStar VE in 3D augmented reality (AR) with your Android or iPad tablet! Point your device‘s scanner at the QR code below or go to: www.thielenhaus.com/en/news-media/mobile-apps/

Download the CrankStar App and point the device’s camera at the marker (above)

7

Further High Precision Machining Solutions for

Finishing grinding Honing ●



antifriction bearings

Flat and spherical surfaces

double disc grinding

extreme precision for a Sustainable World – Manufactured around the World

thielenhaus technologies gmbH

thielenhaus Microfinish Corporation

Schwesterstraße 50 42285 Wuppertal, germany phone: +49 (0)2 02 - 4 81-0 Fax: +49 (0)2 02 - 45 04 45 [email protected] www.thielenhaus.com

42925 W. nine Mile road novi, Mi 48375, u.S.a. phone: +1 (2 48) 3 49-94 50 Fax: +1 (2 48) 3 49-94 57 [email protected] www.thielenhaus.com

thielenhaus Machinery (Shanghai) Co., Ltd Jiangtian dong Lu 212, building 7 Songjiang industrial Zone 201613 Shanghai, p.r. China phone: +86 (21) 67 75 31 57 Fax: +86 (21) 33 52 87 66 [email protected] www.thielenhaus.cn

Superfinish innovation ag St. gallerstraße 52 CH-9548 Matzingen phone: +41 (0) 5 23 76 26 20 Fax: +41 (0) 5 23 76 26 19 [email protected] www.superfinish.ch