dress as - Winnie and Wilbur

234 downloads 180 Views 4MB Size Report
Hat template from www.winnie-the-witch.com. If you don't want to use coloured paper, just print the hat template on whit
Dress as Winnie

Winnie’s Cone Hat

You will need: · · · · · · ·

1 2 3 4

Blue, yellow, orange and purple paper Scissors Pencil Glue stick Hole punch Elastic Hat template from www.winnie-the-witch.com If you don’t want to use coloured paper, just print the hat template on white paper and colour it in. Simple! Print out the HAT TEMPLATE twice – tape together and use as one whole template, onto BLUE paper, then cut out. Copy the ‘stripes’ template on to a folded piece of PURPLE paper and cut out. Unfold the semicircle and put to one side. Copy ORANGE and YELLOW stripes on to a folded piece of YELLOW and ORANGE paper. Cut out. Unfold the semicircles. Then carefully cut along the YELLOW strip so it is in half again.

5 6

Cut out the MOON and STAR from the template on YELLOW card. Glue everything on to the flat cone and leave to dry. Then go over all the lines with a black felt tip pen.

7

Attach the hat together with some double-sided tape and/or a stapler. For a little extra touch, push a small bit of rectangular paper through the hole at the top of the hat and bend to one side!

Winnie the Witch Wig

You will need: · · · · · ·

1 2 3 4 5

 lack card (long enough to fit round B a child’s head – A1 or A2) 2 x A1 sheets black sugar paper Ruler Pencil Stapler Sellotape/double-sided tape for neatness

The beauty of this wig is that you can add as much or as little hair as you want!

Measure a length of card around your head.

Tape or staple into place so you have a card ring that fits perfectly round your head (this one is 5cm deep). Tape another piece of card across the top of the ring. Repeat on the other side so you have a cross. Cut two more pieces of card and place diagonally over the cross. Staple into place. Then attach the last piece of card to cover any gaps so you have the basis of your Winnie wig (like a skullcap). Now the fun begins! Fold two A1 pieces of black paper like an accordion for Winnie’s frizzy hair. Gently pull the ‘accordion’ apart and cut into strips. Attach the strip around the top part of the wig ring with double-sided tape or use a stapler. Then attach pieces from the top of the head, down. It doesn’t matter if there are different lengths or widths of hair, as that adds to the wig!

www.winnie-the-witch.com

Dress as

Wilbur’s Headdress

You will need: · · · · · · · · ·

Black card Scissors Double-sided tape Pencil Glue stick Stapler Ruler White pencil Wilbur template from www.winnie-the-witch.com

1

Cut out a strip of thin BLACK card, long enough

2 3 4 5

to wrap around your head. Staple together to secure into place.

Cut out Wilbur’s head shape, then fringe the edges slightly for Wilbur’s fur. Use the eyes, nose, teeth and ears from the template. Draw round the eyes on to GREEN paper, nose on to PINK paper and ears on to BLACK and BLUE paper. Glue the eyes, nose, ears and teeth to Wilbur’s head. Add some pupils to his eyes, white whiskers and mouth line with the white pencil. Then attach his head to the headband. There you have it! For the rest of Wilbur’s costume, wear a black jumper, trousers or leggings and shoes. Another idea for Wilbur’s face would be to use face paints.

Wilbur

Valerie Thomas and Korky Paul



Winnie Cone Hat Templates You may photocopy this sheet