Prerequisites Step 1 Setup network on both devices to be on the same sub‐network.
Step 2 Use latest firmware available (at least V. 3.395 for Android models) Download link
Professional BRAVIA IP control
4
Setup configuration Non-Android models: 1) Go to Hotel / Pro mode (“ i+ / mute / vol+ / on” with the remote control, done on standby mode) 2) Go to Settings > ECO •
Select Idle TV standby to “off”
3) Go to Settings > Hotel Pro Mode •
Select IP Control
•
Set Authentication to “Normal & Pre-shared Key”
•
Set Simple IP control to “On”
4) Activate Hotel / Pro Mode
Android models : 1) Go to Hotel / Pro mode (“ i+ / mute / vol+ / home” with the remote control, done in running state) 2) Go to Settings > System Settings > ECO •
Select Idle TV standby to “off”
3) Go to Settings > Network > Home Network Setup •
Select IP Control
•
Set Authentication to “Normal & Pre-shared Key”
•
Set Simple IP control to “On”
4) Activate Hotel / Pro Mode
Professional BRAVIA IP control
5
Tests and tools 1) IP Command checker Download IDTalkCommandChecker.exe tool Set display IP address Set port number to 20060 Using pud protocol master XLS file Copy/past command to be tested from SSIP tab.
2) BRAVIA Power Management BRAVIA Power Management can control several BRAVIA via network remotely. You can control power status not only manually, but by a schedule, and check power status.