Industrial Ethernet - CTC Union

2 downloads 290 Views 7MB Size Report
Simultaneous transmission of Ethernet data and PoE Power over Phone line wire or coaxial cable ... Additionally, PoE mod
Industrial Ethernet

Product Guide

w w w. c t c u.c o m

10G Core Switch SyncE Switch PoE Switch EN 50155 Switch for Transportation & Automation IEC 61850-3 Switch for Power Substation FieldBus (ProfiBus, ModBus, CAN Bus) 4G LTE M2M Router

IP67

EN50155

NEMA TS2

EN50121-4

EN61000-6-2 EN61000-6-4

e - catalog

Industrial Ethernet Product Category Using the latest Ethernet and Power over Ethernet technologies, CTC Union has stormed into the "Industrial Grade Ethernet" market place with a wide range of rugged Ethernet products for security, industry, public utilities, transportation and power substation deployment. With a heavy focus on reliability, certifications and new standards, this proactive thinking will allow CTC Union to continue developing solutions for today and tomorrow's markets.

FieldBus

-Automation

Ethernet Switch & Converter

PoE Series

(Switch/Converter/ Extender/Injector)

µ-Ring SmartConfig™

SmartView™

4G LTE M2M Router IEC 61850-3 Switch

-Power Substation

EN50155 Switch

SyncE Switch Core Switch

-Transportation & Automation

Why We’re Reliable Certification

SmartViewTM EMS

•Safety UL60950-1 •Trackside EN50121-4 •On-Board Train EN50155 •Power Substation IEC 61850-3 •Heavy Industrial EN61000-6-4/6-2 •Traffic control NEMA TS2

NEMA TS2

•Centralized Management •Device Monitoring & Management •Long Term Event Storage (up to 1 Year) •Performance Monitoring •Remote Access Management

Warranty -40°C

Harsh Environment

75°C

1

•IP67 Waterproof •Wide Temperature •Industrial Grade Component Inside •High MTBF •Fanless

5

years

SmartConfigTM Quick & Easy

•Mass Deployment •Quick Install/Config •Device Auto Discovery •Backup/Restore Configuration •Firmware Upgrade

Industrial Core Switch IEEE 1588 V2

IPV6

(Please refer to page 14 for more details.)

Negative voltage

UL60950-1

EN50121-4 EN61000-6-2

SmartView

EN61000-6-4

µ-Ring

CTC Union’s Industrial Core Switch Series complies with many industrial-grade standards and is ideal for deployments in harsh environments to deliver mission-critical network services. Additionally, with high port density and Gigabit or 10 Gigabit high-speed uplink, the series is a reliable and scalable solution for core layer or backbone applications. up to 14 rings Features • 2/4x 10GbE SFP+ and 24x GbE SFP with 4x Combo • Redundant & wide range power inputs (isolated 24/48VDC, 110/220VAC) • Supports negative voltage power input with isolated RS-232 console port (for example in telecom system) • µ-Ring (Multiple Ring), maximum up-to 14 rings • SmartConfigTM for quick & easy mass configuration • SmartViewTM for centralized management • SNMP, Web, Telnet, CLI, IPV6, DHCP, MIB ll, Qos, CoS,ACL, Security, IGMP, VLAN, LACP, IEEE 1588v2

10G Core Switch

10G Core Switch

10G Backbone

10G 10G Core Switch

10G 10G Core Switch

up to 14 rings

10G Backbone with µ-Ring topology

Industrial SyncE Switch E SyncE

IEEE 1588 V2

IPV6 Negative voltage

UL60950-1 (Please refer to page 14 for more details.)

EN50121-4 EN61000-6-2

SmartView

EN61000-6-4

µ-Ring

CTC Union’s SyncE Switch Series supports timing synchronization features (SyncE & IEEE 1588 PTP v2) that allow operators to deliver services with optimal stability and continuity in end to end connectivity. SyncE and IEEE1588 PTP V2 are useful in mobile backhaul applications and these industrial grade switches are at home in this application where many devices are placed in outdoor cabinets. Features • 8/16x 10/100/1000Base-T RJ45 and 4/8x 100/1000Base-X SFP Fiber with SyncE • Supports Sync. Ethernet allow operators to deliver service with optimal stability and continuity in end-to-end connectivity • Supports IEEE1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port • Supports negative voltage power input with isolated RS-232 console port (for example in telecom system) • 2.25K VDC Hi-pot isolation protection for Ethernet ports and power • µ -Ring for Redundant Cabling, recovery time