.... absence of instructions, Nevins will
PRICE LIST
Multi - Level Seating
2017
Updated 09.18.17
CLIMB
Nevins Freight All prices are LIST
All prices are LIST. We reserve the right to change prices without prior notification at any time. There is a $99 minimum order surcharge for all orders less than $2,000 NET and for orders $2,000 NET and over, a Freight Fee equaling 5% of the orders NET value applies. Nevins reserves the right to add an additional surcharge for Custom or Stone Products. This surcharge will be calculated depending on the type, size and destination of the product.
Terms : Conditions : Warranty Please refer to nevins.co
GSA and State Contract Information Refer to Nevins website: http://nevins.co/Resources/GSA‐State‐Contracts
Contact Information GSA Contract Administrator B Nevins Ltd P.O. Box 108 Cat Spring, TX 78933 Phone (800) 231‐2744 Fax (713) 230‐2150
[email protected]
www.gsaadvantage.gov
CliMb Collection Multi‐Level Seating
Table of Contents MATERIALS AND FINISHES Construction Power Units Upholstery General Information COM / COL Information Graded‐In Fabrics Fabric Approval Form Contrasting Fabric Sketch Form
3 3 4 5 6 7 8
OVERVIEW
9‐14
PRICING
15‐18
HOW TO SPECIFY
19‐20
REVISION SUMMARY
21‐22
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CliMb Collection Multi‐Level Seating
SPECIFICATIONS All specifications stated herein are subject to change without notice. dimensions stated herein are nominal.
POWER UNITS Any product
Cove
CONSTRUCTION Seating Interior Frame
Interior frame is constructed of 3/4" engineered plywood and 5/4 soft maple. Joinery is mortise and tenon puzzle frame technology, properly glued, clamped and stapled for maximum joint stability. Corners are reinforced using corner blocks and metal brackets that are securely fastened with glue and screws/staples. All interior wood components meet or exceed CARB Regulations. All engineered plywood used in the construction meets ANSI/HPVA HP‐1 standards.
Back : Seat
All Climb upholstery features a saddle stitch with tape reinforcing fabric detail that not only dramatically increases the seam strength, but enhances the seam detail for a clean crisp appearance. The seat and back are upholstered with a tight pull‐over style and padded with a 1.8/90 high density foam. The seat frame utilizes a solid seat platform which greatly increases strength and sustains a resistance to the rigors of high traffic environments. Climbs’ seating comfort is achieved by a design that allows the body to find the most comfortable posture/position and utilizes a full 1 1/2‐inch‐ thick cushion of 1.8/90 high density foam. All outside surfaces are padded with a 1” thick 1.8/90 foam. All foam meets California 117 fire code specification.
California 117 Fire Code All of Nevins upholstered seating products conform to California Technical Bulletin 117. California 133 Fire Code Nevins can enhance seating components to include a Burngard barrier cloth. When a Burngard barrier cloth is used in conjunction with a CAL 133 certified fabric, the product can meet CAL 133 testing criteria. Please contact Nevins Quotation Department.
3
MATERIALS and FINISHES
Power Only COV2 (2 Pwr) COV4 (4 Pwr) Power / Charging USB COV1U (1 Pwr / 2 USB) COV3U (3 Pwr / 2 USB)
Silver
Option Code Black
White
COV2S COV4S
COV2B COV4B
COV2W COV4W
COV1US COV3US
COV1UB COV3UB
COV1UW COV3UW
CliMb Collection Modular Lounge Seating
UPHOLSTERY
UPHOLSTERY (continued)
General Information
General Information (continued)
CliMb upholstered seating products are available with the Customer's Own Material (COM) or Leather (COL).
Puddling
COM/COL Approval
All COM/COL fabrics must be tested and approved by Nevins. A completed Fabric Approval Form and (2) 4" x 4" memo samples of the fabric to be tested must be submitted to Nevins Customer Service Department. Please allow 5 business days (from sample receipt by Nevins) for testing and notification of written approval by Nevins COM/COL orders cannot be scheduled for production or acknowledged with a ship date until the COM/COL swatches are approved and the required yardage/square footage has been received, inspected and approved by Nevins. All COM/COL shipments must be shipped prepaid.
Combination Fabrics
Contrasting fabrics may be specified on the seat (a), side panels (b) or back (c). Contrasting fabric applications must be clearly indicated on the customer's order. A completed Contrasting Fabric Sketch form must be submitted along with the Fabric Approval form. An upcharge of $55 list applies; per additional fabric, per unit.
Puddling may occur as a result of certain climate conditions and/or the natural stretch inherent in fabrics and leathers. Puddling is not a flaw in the fabric, leather or manufacturing process. Nevins cannot predict or be responsible for how upholstery wears in an installation setting and does not guarantee against puddling.
Fabric Warranty
Nevins will not be held responsible for wear, fading, performance, appearance, behavior, flame retardency or durability of any fabrics or leather whether supplied by the Customer or by Nevins. Graded‐In, COM or COL fabrics are not covered under Nevins Warranty.
Multiple Quantities
When ordering multiple quantities, yardage requirements may be reduced. Please contact Nevins Customer Service Department for yardage requirements on multiple quantities.
COM / COL Information COM Recommended Yardage Requirements
Upholstery Application
All fabrics will be cut, seamed and applied at the discretion of the factory. railroad application is the standard application method. Any special instructions regarding the application of the fabric (pattern, direction, face side, etc.) must be indicated on your order. In the absence of instructions, Nevins will apply the fabric at our own discretion, without liability.
Fabric and Leather Imperfections
Nevins reserves the right to reject any fabric deemed unsuitable for upholstery purposes. Nevins inspects fabrics for mill imperfections, however, Nevins will not be held responsible for defects, color inaccuracies, dye lot variations or other such flaws. Leather is a natural product. Imperfections such as wrinkles and scars are considered normal and acceptable. Nevins is not responsible for the placement or appearance of these markings. Customer's leather must meet minimum standards of no more than three defects per hide. Imperfections that penetrate the hide, large marks, brands, excessively healed‐over scars or scratches, burns and excessive fat wrinkles are considered unacceptable defects.
Striped or Patterned Fabric
For striped or patterned fabrics, specify vertical or horizontal application. In the absence of instructions, Nevins will apply the fabric pattern at our own discretion without liability.
Pattern Matching
Should a COM be striped or have a pattern repeat requiring matching, a matching charge may apply. Please contact Nevins Customer Service Department. For reversible fabrics, a swatch of the COM must be provided to Nevins, clearly indicating which side should be exposed. In the absence of instructions, the factory will apply material at their own discretion without liability.
The yardage requirements listed herein are for one unit and are based on 54" wide non‐directional fabrics. Generally, additional yardage is required if fabric is striped, patterned, requires matching, or if width of material is less than 54" wide. Please use the additional yardage guideline chart below to determine COM yardage requirements. Add the percentage shown on the chart to the standard yardage requirement. The below chart must be considered as an estimate only. Nevins is not responsible for overages or if additional yardage is required. Please contact Nevins Customer Service Department for assistance in determining yardage. Note: To allow for better yield and more efficient cutting, all COM fabrics must be supplied in continuous roll/yardage lengths, rather than cut pieces.
Additional COM Yardage Guideline Fabric Non‐Directional Width Fabric
Railroad Applications (Standard) Repeat 1‐5" 6‐9" 10‐13" 14‐20"
0% 15% 20%
54" 50" 48"
15% 20% 25%
18% 25% 30%
25% 30% 35%
30% 35% 40%
21‐27"
28‐36"
35% 40% 45%
40% 45% 50%
Right‐Way (Up the Roll) Applications (Optional; Must be Requested) Repeat Fabric Non‐Directional Width Fabric 1‐5" 6‐9" 10‐13" 14‐20" 21‐27" 0% 15% 20%
54" 50" 48"
10% 15% 20%
15% 20% 25%
Right‐Way Application (Must be Requested)
20% 25% 30%
25% 30% 35%
30% 35% 40%
28‐36" 35% 40% 45%
Railroad Application (Standard)
Backing Requirements
Not all fabrics are suitable for upholstery and some may require an acrylic backing to prevent unraveling or stretching. This is determined when the fabric arrives and is inspected. When this occurs, the customer will be notified of the applicable fees.
Protective Fabric Finishes and Backings
Many textile manufacturers offer a wide array of protective finishes, custom backings and flame‐retardant treatments. Some of the available treatment options include, but are not limited to, Crypton®, Gore Seating Protection®, Nano‐Tex®, Nano‐Tex with Durablock®, Teflon® and MicroB®. Please contact your textile manufacturer for assistance on finishes to enhance the performance or application of your fabrics.
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
COL Square Footage Requirements COL square footage requirements are determined by the leather hide finish and size. All leather(s) must be approved by Nevins. Upon approval, Nevins will advise square footage requirements.
Excess COM/COL Nevins is not responsible for COM/COL overages. Unless specifically stated on the order, excess COM/COL will not be stored or returned.
CLIMB MULTI‐LEVEL SEATING 4
CliMb Collection Multi‐Level Seating
UPHOLSTERY (continued)
UPHOLSTERY (continued)
COM / COL Information (continued)
Ordering COM/COL a) Obtain Nevins COM/COL Approval
Standard COM Yardage Single Fabric Applications
a.1) Single Fabric Applications Email a completed Fabric Approval Form to
[email protected]
COM Yards * Single Fabric Applications
Seat/Side Panels/Back
Single Tier Seating
a.2)
Contrasting Fabric Applications Email a completed Fabric Approval Form and Contrasting Fabric Sketch Form to
[email protected]
CMB1A Single In CMB1B Single Out CMB1E Single In Left
6 6 6
CMB1F Single In Right
6
CMB1G Single Out Left
6
CMB1H Single Out Right CMB1C Corner Single In CMB1D Corner Single Out
6 8 2/3 7 3/4
b) Await notification of fabric approval and yardage requirements from Nevins.
6 6 6 6 6 6
c) Purchase Order Requirements (must be indicated on order) :
b.1)
Double Tier Seating CMB2A Double In CMB2B Double Out CMB2E Double In Left CMB2F Double In Right CMB2G Double Out Left CMB2H Double Out Right
* Note: To allow for better yield and more efficient cutting, all COM fabrics must be supplied in continuous roll/yardage lengths, rather than cut pieces.
Contrasting Fabric Applications Contrasting fabrics may be specified for the seat (a), side panels (b) or back (c). Additional yardage is required if the fabric is striped, patterned, requires matching, or if width of material is less than 54" wide. Please use the additional yardage guideline chart on page 4 to determine COM yardage requirements. COM Yards *
Single Tier Seating CMB1A Single In CMB1B Single Out CMB1E Single In Left CMB1F Single In Right CMB1G Single Out Left CMB1H Single Out Right CMB1C Corner Single In CMB1D Corner Single Out
Contrasting Fabric Applications Seat Side Panel(s) Back Panel(s) (pair)
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 4 5
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 2/3
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2
‐
1 1 1 1 1 1 2 2 3/4
Double Tier Seating CMB2A Double In CMB2B Double Out CMB2E Double In Left CMB2F Double In Right CMB2G Double Out Left CMB2H Double Out Right
1 1 1 1 1 1
* Note: To allow for better yield and more efficient cutting, all COM fabrics must be supplied in continuous roll/yardage lengths, rather than cut pieces.
Standard COL Square Footage
COL square footage requirements are determined by the hide type, shape and usable, clean square footage. All leather must be approved by Nevins; see "Ordering COM/COL" below. Contrasting leathers may be specified for the seat (a), side panels (b) or back (c). Contact Nevins Customer Service Department for assistance in 5 MATERIALS and FINISHES determining square footage requirements
Please allow 5 business days for testing and notification of written approval by Nevins.
• Fabric Make • Fabric Style/Pattern • Fabric Color • Fabric Number • Any special instructions regarding the application of the fabric must be indicated on the customer's order. In the absence of instructions, Nevins will apply the fabric at our own discretion, without liability.
d) COM/COL Shipping Instructions d.1) Upon receipt of a COM/COL order and fabric approval, Nevins will provide a COM/COL Shipping Instructions Form. This form will provide the COM/COL tagging information, yardage requirements and the manufacturing address to which the COM/COL is to be shipped. d.2) Once the required COM yardage/COL square footage has been shipped to the Nevins manufacturing facility, the customer is required to complete the Tracking Information section of the COM/COL Shipping Instruction Form and return it to Nevins COM (Order Entry) Department. d.3) Once the required COM yardage/COL square footage has been received, inspected and approved, a ship date will be assigned and an order acknowledgement will be issued.
CliMb Collection Multi‐Level Seating
GRADED‐IN UPHOLSTERY
FABRIC LISTING BY GRADE and ALPHABETICALLY
Graded‐In Fabric Designs from CF Stinson Nevins offers our upholstered benches with select patterns of graded‐in CF Stinson upholstery. All fabric patterns are subject to the availability of the fabric from CF Stinson. CF Stinson reserves the right to discontinue any pattern or color from their libraries. For all patterns not listed, please contact Nevins Customer Service Department. To view patterns and colorways or to order memo samples, please refer to www.cfstinson.com
Listed Alphabetically
X
Tweed
X X X X
X X X X
Bespoke Gravity Interval Manchester Posh Realm Sundance
X X X X X X X
X X X X X X X
X X X X X X X
X X X X X X X
Bali Bespoke Brilliant
X
X
X
Channel (Vinyl) * Cozy
X
X
X X
X X
Grade 14 X X X X X
Hudson
11 7 4
X X X
X X X
X X
Outlander
4
X
X
Posh
7
X
X
X
Realm Respite
7 12
X X
X X
X
Simplicity (Vinyl) Sprint Squire Summit Sundance
4 2 8 8 7
X X X X X
X X X X X
Tribeca Tweed
3 10
X X
X X
Zoom
8
X
X
X
O
8 8
X X
X X
X
P
X
Duet
8
X
X
X
R
Furrows
4
X
X
F S
G Gravity
7
X
X
X
Haven Hive Hudson
9 3 14
X X X
X X X
X X X
T
Interval
7
X
X
X
Z
Grade 8 Channel (Vinyl) * Cozy Duet Montage Squire Summit Zoom
X X
Manchester Montage
X X
D
Grade 15 Jala Acadia Epingle
7 8
M
Grade 12
Grade 7
X
Jala
C Respite
X
J
B
Grade 11 Bali
15
Steps
X
X X
Back Panel(s)
X
X X
Side Panels
X
15 3
A Acadia Epingle Ace
Allowed Applications
Grade
X
Back Panel(s)
X
Grade 10
Grade 4 Brilliant Furrows Outlander Simplicity (Vinyl)
X
Side Panels
Haven
Allowed Applications
Grade
X X X
Steps
X X X
X
Grade 9
Grade 3 Ace Hive Tribeca
Back Panel(s)
X
Side Panels
Back Panel(s)
X
Grade 2 Sprint
Allowed Applications
Steps
Side Panels
Allowed Applications
Steps
Listed by Grade
H X X X X X
X X
I
* Railroad application only. NOTE : Grades are subject to change, without notice. The fabric grade listings within this price guide are the most up‐to‐date listings available at the time of print.
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CLIMB MULTI‐LEVEL SEATING 6
CliMb Collection Multi‐Level Seating Single Fabric Applications Fabric Approval Form INSTRUCTIONS 1. Email completed form to :
[email protected]
2. For contrasting fabrics, please include a completed Contrasting Fabric Sketch Form. One completed form for each model ordered is required. 3. Please allow 5 business days for fabric testing and notification of written approval by Nevins.
DEALER / PROJECT INFORMATION Name : ________________________________________________________________
Contact : _______________________________________________________________
Address : _______________________________________________________________
City, State, Zip : __________________________________________________________
Phone : ________________________________________________________________
Fax : ___________________________________________________________________
Project Name : __________________________________________________________
PO Number : ____________________________________________________________
Nevins Sales Rep : ________________________________________________________
Nevins Sales Order Number : ______________________________________________
FABRIC / PRODUCT INFORMATION COM or COL Manufacturer : ___________________________________________________________________________________________________________________________________ Pattern Name / Color / Number : ______________________________________________________________________________________________________________________________ Pattern Repeat (in inches) : None _______________ Vertical Repeat _______________ Horizontal Repeat _______________ Is Fabric Reversible (check one) ? no ____________ yes ____________ (swatch must be marked to indicate face side) Is Fabric Stripped (check one) ? no ____________ yes ____________ Direction of stripe (check one) : vertical __________ horizontal ___________
Fabric Orientation Single Fabric Applications
Railroad (default orientation if not specified)
Qty
Product Model No.
Fabric Orientation Contrasting Fabric Applications
Right‐Way (Up‐the‐Roll)
Product Description Complete and attach Contrasting Fabric Sketch Form for each model ordered.
Nevins Use Only Sample Receipt Date : ________________________________________________
Fabric Authorization : Approved _______________ Not Approved ______________
Single Fabric COM Yardage Requirement (per specified orientation) : ______________________
Contrasting COM Yardage Requirement (per specified orientation) : Seat (a) _____________ Side Panels (b) _____________ Back (c) _____________
Signature : ______________________________________________________________
Date : ______________________________________________________________
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CliMb Collection Multi‐Level Seating CliMb Collection Contrasting Fabric Sketch Form INSTRUCTIONS 1. Attach completed Contrasting Fabric Sketch form (one form per each model ordered) to Fabric Approval form. See Fabric Approval form for submittal instructions.
DEALER / PROJECT INFORMATION Name : _________________________________________________________________
Contact : ___________________________________________________________
Address : ________________________________________________________________
City, State, Zip : ______________________________________________________
Phone : _________________________________________________________________
Fax : ________________________________________________________________
Project Name : ___________________________________________________________
PO Number : ________________________________________________________
Nevins Sales Rep : _________________________________________________________
Nevins Sales Order Number : ___________________________________________
PRODUCT MODEL No. : _____________________________ (one form per each model ordered is required) Orientation Diagrams
Component Diagrams
Standard
Single In/Out Double In/Out
Corner Single Out
Corner Single In
Railroad
Must be Requested
Right‐Way (Up‐the‐Roll)
SEAT (a) FABRIC INFORMATION COM or COL Manufacturer : _____________________________________________________________________________________________________________________________________ Pattern Name / Color / Number : ________________________________________________________________________________________________________________________________ Pattern Repeat (in inches) : None __________ Vertical Repeat __________ Horizontal Repeat __________ Is Fabric Reversible (check one) ? no _______ yes _______ (swatch must be marked to indicate face side) Is Fabric Stripped (check one) ? no _______ yes _______ Direction of stripe (check one) : vertical ________ horizontal ________ Fabric Orientation (check one) : Railroad (default if not specified) ________ Right‐Way (Up‐the‐Roll) ________
SIDE PANELS (b) FABRIC INFORMATION COM or COL Manufacturer : _____________________________________________________________________________________________________________________________________ Pattern Name / Color / Number : ________________________________________________________________________________________________________________________________ Pattern Repeat (in inches) : None __________ Vertical Repeat __________ Horizontal Repeat __________ Is Fabric Reversible (check one) ? no _______ yes _______ (swatch must be marked to indicate face side) Is Fabric Stripped (check one) ? no _______ yes _______ Direction of stripe (check one) : vertical *** Vinyl; may be used for either the step or side panels of the CliMb un Fabric Orientation (check one) : Railroad (default if not specified) ________ Right‐Way (Up‐the‐Roll) ________
BACK (c) FABRIC INFORMATION COM or COL Manufacturer : _____________________________________________________________________________________________________________________________________ Pattern Name / Color / Number : ________________________________________________________________________________________________________________________________ Pattern Repeat (in inches) : None __________ Vertical Repeat __________ Horizontal Repeat __________ Is Fabric Reversible (check one) ? no _______ yes _______ (swatch must be marked to indicate face side) Is Fabric Stripped (check one) ? no _______ yes _______ Direction of stripe (check one) : vertical ________ horizontal ________ Fabric Orientation (check one) : Railroad (default if not specified) ________ Right‐Way (Up‐the‐Roll) ________
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CliMb Collection Multi‐Level Seating Overview Single Tier Seating Model Unit Style
CMB1A Single In
CMB1B Single Out
Model Unit Style
CMB1E Single In Left Straight
CMB1F Single In Right Straight
*** Vinyl; may be used for either the step or side panels of t
9
OVERVIEW
CliMb Collection Multi‐Level Seating Overview Single Tier Seating (continued) Model Unit Style
CMB1G Single Out Left Straight
CMB1H Single Out Right Straight
Model Unit Style
CMB1C * Corner Single In
CMB1D Corner Single Out
* CMB1C may only be adjoined with outward tapered units.
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CLIMB MULTI‐LEVEL SEATING 10
CliMb Collection Multi‐Level Seating Overview Double Tier Seating Model Unit Style
CMB2A Double In
CMB2B Double Out
Model Unit Style
CMB2E Double In Left Straight
CMB2F Double In Right Straight
***
11
OVERVIEW
CliMb Collection Multi‐Level Seating Overview Double Tier Seating (continued) Model Unit Style
CMB2G Double Out Left Straight
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CMB2H Double Out Right Straight
CLIMB MULTI‐LEVEL SEATING 12
CliMb Collection Multi‐Level Seating Overview (continued) Power Options
COV1U
Model
COV2
COV3U
COV4
Cove
Cove
Cove
Cove
(Power/USB)
(Power Only)
(Power/USB)
(Power Only)
5"L x 2.5"D (1) Electrical Outlet (12A,120VAC) (2) Charging USB (2.1A/11W, 5V/DC) (1) 108" Electrical Cord 15 AMP Silver, Black or White Gloss Finish ETL Listed
5"L x 2.5"D (2) Electrical Outlets (12A,120VAC) (1) 108" Electrical Cord 15 AMP Silver, Black or White Gloss Finish ETL Listed
7.75"L x 2.5"D (3) Electrical Outlets (12A,120VAC) (2) Charging USB (2.1A/11W, 5V/DC) (1) 108" Electrical Cord 15 AMP Silver, Black or White Gloss Finish ETL Listed
7.75"L x 2.5"D (4) Electrical Outlets (12A,120VAC) (1) 108" Electrical Cord 15 AMP Silver, Black or White Gloss Finish ETL Listed
Note: Alternate power/USB/data configurations are available. Please contact Nevins Customer Service Department.
Standard Power Placement * • Placement is allowed on the top tier (centered, 4 3/4" in from the back of the tier) or on the front face (centered, 4 3/4" up from the bottom) of the bottom tier. Please indicate placement code; see illustration below. Note: Power units are not allowed on CliMb Corner units, Models CMB1C and CMB1D.
Power Unit Placement Code
TT
BT
Top of Top Tier
Face of Bottom Tier
***
TBT Top of Top Tier and Face of Bottom Tier
13
OVERVIEW
CliMb Collection Multi‐Level Seating Overview (continued) Contrasting Fabric • Contrasting fabrics may be specified for the seat (a), side panels (b) or back (c). Additional yardage is required if the fabric is striped, patterned, requires matching, or if width of material is less than 54" wide. Please use the additional yardage guideline chart on page 4 to determine COM yardage requirements. An upcharge of $55 list per fabric contrasting applies. Note : Vinyls may be used for either the steps or side/back panels of the CliMb units, not both.
COM Yards * Contrasting Fabric Applications Seat Side Panel(s) Back Panel(s) (pair)
Single Tier Seating
CMB1A Single In CMB1B Single Out CMB1E Single In Left CMB1F Single In Right CMB1G Single Out Left CMB1H Single Out Right CMB1C Corner Single In CMB1D Corner Single Out
Double Tier Seating
CMB2A Double In CMB2B Double Out CMB2E Double In Left CMB2F Double In Right CMB2G Double Out Left CMB2H Double Out Right
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 4 5
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 2/3
1 1 1 1 1 1 2 2 3/4
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2
1 1 1 1 1 1
‐
*
Single/Double In/Out
Corner Single Out
Corner Single In
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CLIMB MULTI‐LEVEL SEATING 14
CliMb Collection Multi‐Level Seating
Graded‐In CF Stinson Textiles COM Model
Dimensions
Weight
W x D x H
Lbs
2
COM Yardage Requirements
3
4
5
6
7
8
9
10
11
12
14
15
List $ per unit
yards
(nominal)
(approx.)
CMB1A
52"/30" x 41.5" x 34"
94
6
2336
2837
2903
2961
3063
3150
3267
3396
3474
3603
3696
3871
4180
4668
CMB1B
30"/52" x 41.5" x 34"
94
6
2336
2837
2903
2961
3063
3150
3267
3396
3474
3603
3696
3871
4180
4668
52"/41" x 41.5" x 34" CMB1E Straight left side (as facing) Inward Taper right side (as facing)
95
6
2702
3220
3285
3342
3443
3529
3645
3773
3849
3977
4069
4242
4547
5030
52"/41" x 41.5" x 34" CMB1F Straight right side (as facing) Inward Taper left side (as facing)
95
6
2702
3220
3285
3342
3443
3529
3645
3773
3849
3977
4069
4242
4547
5030
Single Tier Seating Single In
(single fabric applications)
Inwards Taper
Single Out Outwards Taper
Single In Left Straight
Single In Right Straight
Key Features
• 8 Single Tier and 6 Double Tier models are available. • 27 Graded‐In CF Stinson fabrics are available. All COM fabrics require pre‐approval. • Contrasting fabric option available. • 4 Cove power units are available; installation allowed in the top tier or face of the bottom tier. • Nylon adjustable glides are standard. Non‐skid rubber glides are available by request; option code NSG. • Each unit has 500 lb. weight capacity.
Contrasting Fabric
• Contrasting fabrics may be specified for the seat (a), side panels (b) or back (c) All COM fabrics require pre‐approval.
Optional Power Units (not allowed with Models CMB1C and CMB1D)
15
PRICING
CMB1A/B
2 1/2 2 1/2 1
CMB1E/F/G/H CMB1C
2 1/2 2 1/2 1
4 2 2/3 2
Option Code * Black
White Gloss
COV2S COV4S
COV2B COV4B
COV2W COV4W
292 each 479 each
COV1US COV3US
COV1UB COV3UB
COV1UW COV3UW
396 each 520 each
List $
Cove Power Only COV2 (2 Pwr) COV4 (4 Pwr) Power / Charging USB COV1U (1 Pwr / 2 USB) COV3U (3 Pwr / 2 USB)
* Please indicate power placement code. See How to Specify, page 14
Optional Non‐Skid Glides Non‐Skid Rubber Glides
Yardage Requirements by Component Seat Side Panels (pair) Back Panel(s)
Silver
Option Code
NSG
no charge
CF‐CMB
per 55 additional fabric / per unit.
CMB1D
5
‐
2 3/4
Contrasting Fabric
CliMb Collection Multi‐Level Seating
Graded‐In CF Stinson Textiles COM Model
Dimensions
Weight
W x D x H
Lbs
(nominal)
Single Tier Seating
2
COM Yardage Requirements
3
4
5
6
8
9
10
11
12
14
15
List $ per unit
yards
(approx.)
7
(single fabric applications)
41"/52" x 41.5" x 34" CMB1G Straight left side (as facing) Outward Taper right side (as facing)
95
6
2702
3220
3285
3342
3443
3529
3645
3773
3849
3977
4069
4242
4547
5030
41"/52" x 41.5" x 34" CMB1H Straight right side (as facing) Outward Taper left side (as facing)
95
6
2702
3220
3285
3342
3443
3529
3645
3773
3849
3977
4069
4242
4547
5030
CMB1C 52" x 52" x 41.5" x 41.5" x 34" 125
8 2/3
3119
3743
3824
3897
4024
4133
4280
4442
4538
4700
4816
5035
5421
6031
7 3/4
2747
3266
3334
3394
3500
3591
3714
3848
3929
4064
4160
4343
4664
5173
Single Out Left Straight
Single Out Right Straight
Corner Single In * Inwards Taper
* CMB1C may only be adjoined with outward tapered units.
Corner Single Out
CMB1D 52" x 52" x 41.5" x 41.5" x 34"
90
Outwards Taper
Key Features
• 8 Single Tier and 6 Double Tier models are available. • 27 Graded‐In CF Stinson fabrics are available. All COM fabrics require pre‐approval. • Contrasting fabric option available. • 4 Cove power units are available; installation allowed in the top tier or face of the bottom tier. • Nylon adjustable glides are standard. Non‐skid rubber glides are available by request; option code NSG. • Each unit has 500 lb. weight capacity.
Contrasting Fabric
• Contrasting fabrics may be specified for the seat (a), side panels (b) or back (c) All COM fabrics require pre‐approval.
Optional Power Units (not allowed with Models CMB1C and CMB1D)
CMB1A/B
2 1/2 2 1/2 1
CMB1E/F/G/H CMB1C
2 1/2 2 1/2 1
4 2 2/3 2
Option Code * Black
White Gloss
COV2S COV4S
COV2B COV4B
COV2W COV4W
292 each 479 each
COV1US COV3US
COV1UB COV3UB
COV1UW COV3UW
396 each 520 each
List $
Cove Power Only COV2 (2 Pwr) COV4 (4 Pwr) Power / Charging USB COV1U (1 Pwr / 2 USB) COV3U (3 Pwr / 2 USB)
* Please indicate power placement code. See How to Specify, page 14
Optional Non‐Skid Glides Non‐Skid Rubber Glides
Yardage Requirements by Component Seat Side Panels (pair) Back Panel(s)
Silver
Option Code
NSG
no charge
CF‐CMB
per 55 additional fabric / per unit.
CMB1D
5
‐
2 3/4
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
Contrasting Fabric
CLIMB MULTI‐LEVEL SEATING 16
CliMb Collection Multi‐Level Seating
Graded‐In CF Stinson Textiles COM Model
Dimensions
Weight
W x D x H
Lbs
2
COM Yardage Requirements
3
4
5
6
7
8
9
10
11
12
14
15
List $ per unit
yards
(nominal)
(approx.)
CMB2A
52"/30" x 41.5" x 34"
95
6
2500
3130
3212
3284
3412
3521
3668
3829
3926
4087
4203
4422
4808
5419
CMB2B
30"/52" x 41.5" x 34"
95
6
2500
3021
3089
3149
3255
3346
3469
3603
3684
3819
3915
4098
4419
4928
52"/41" x 41.5" x 34" CMB2E Straight left side (as facing) Inward Taper right side (as facing)
96
6
2869
3491
3569
3637
3758
3862
4002
4155
4246
4400
4510
4717
5084
5663
Double Tier Seating Double In
(single fabric applications)
Inwards Taper
Double Out Outwards Taper
Double In Left Straight
Key Features
• 8 Single Tier and 6 Double Tier models are available. • 27 Graded‐In CF Stinson fabrics are available. All COM fabrics require pre‐approval. • Contrasting fabric option available. • 4 Cove power units are available; installation allowed in the top tier or face of the bottom tier. • Nylon adjustable glides are standard. Non‐skid rubber glides are available by request; option code NSG. • Each unit has 500 lb. weight capacity.
Contrasting Fabric
• Contrasting fabrics may be specified for the seat (a), side panels (b) or back (c) All COM fabrics require pre‐approval.
Optional Power Units (not allowed with Models CMB1C and CMB1D)
17
PRICING
CMB2A/B
CMB2E/F/G/H
2 1/2 2 1/2 1
2 1/2 2 1/2 1
Option Code * Black
White Gloss
COV2S COV4S
COV2B COV4B
COV2W COV4W
292 each 479 each
COV1US COV3US
COV1UB COV3UB
COV1UW COV3UW
396 each 520 each
List $
Cove Power Only COV2 (2 Pwr) COV4 (4 Pwr) Power / Charging USB COV1U (1 Pwr / 2 USB) COV3U (3 Pwr / 2 USB)
* Please indicate power placement code. See How to Specify, page 14
Optional Non‐Skid Glides Non‐Skid Rubber Glides
Yardage Requirements by Component Seat Side Panels (pair) Back Panel(s)
Silver
Contrasting Fabric
Option Code
NSG
no charge
CF‐CMB
per 55 additional fabric / per unit.
CliMb Collection Multi‐Level Seating
Graded‐In CF Stinson Textiles COM Model
Dimensions
Weight
W x D x H
Lbs
(nominal)
Double Tier Seating
(approx.)
2
COM Yardage Requirements
3
4
5
6
7
8
9
10
11
12
14
15
List $ per unit
yards (single fabric applications)
52"/41" x 41.5" x 34" CMB2F Straight right side (as facing) Inward Taper left side (as facing)
96
6
2869
3491
3569
3637
3758
3862
4002
4155
4246
4400
4510
4717
5084
5663
41"/52" x 41.5" x 34" CMB2G Straight left side (as facing) Outward Taper right side (as facing)
96
6
2869
3491
3569
3637
3758
3862
4002
4155
4246
4400
4510
4717
5084
5663
41"/52" x 41.5" x 34" CMB2H Straight right side (as facing) Outward Taper left side (as facing)
96
6
2869
3491
3569
3637
3758
3862
4002
4155
4246
4400
4510
4717
5084
5663
Double In Right Straight
Double Out Left Straight
Double Out Right Straight
Key Features
• 8 Single Tier and 6 Double Tier models are available. • 27 Graded‐In CF Stinson fabrics are available. All COM fabrics require pre‐approval. • Contrasting fabric option available. • 4 Cove power units are available; installation allowed in the top tier or face of the bottom tier. • Nylon adjustable glides are standard. Non‐skid rubber glides are available by request; option code NSG. • Each unit has 500 lb. weight capacity.
Contrasting Fabric
• Contrasting fabrics may be specified for the seat (a), side panels (b) or back (c) All COM fabrics require pre‐approval.
Optional Power Units (not allowed with Models CMB1C and CMB1D)
CMB2A/B
CMB2E/F/G/H
2 1/2 2 1/2 1
2 1/2 2 1/2 1
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
Option Code * Black
White Gloss
COV2S COV4S
COV2B COV4B
COV2W COV4W
292 each 479 each
COV1US COV3US
COV1UB COV3UB
COV1UW COV3UW
396 each 520 each
List $
Cove Power Only COV2 (2 Pwr) COV4 (4 Pwr) Power / Charging USB COV1U (1 Pwr / 2 USB) COV3U (3 Pwr / 2 USB)
* Please indicate power placement code. See How to Specify, page 14
Optional Non‐Skid Glides Non‐Skid Rubber Glides
Yardage Requirements by Component Seat Side Panels (pair) Back Panel(s)
Silver
Contrasting Fabric
Option Code
NSG
no charge
CF‐CMB
per 55 additional fabric / per unit.
CLIMB MULTI‐LEVEL SEATING 18
CliMb Collection Multi‐Level Seating How To Specify /
1) Specify Model Number
Model
Single Tier Seating
Model
Single Tier Seating
Single In
CMB1A
Corner Single In
Single Out
CMB1B
Corner Single Out
Single In Left Straight
CMB1E
Model
Double Tier Seating CMB1C *
CMB1D
Double In
CMB2A
Double Out
CMB2B
Double In Left Straight
CMB2E
* CMB1C may only be adjoined with outward tapered units.
Single In Right Straight
CMB1F
Double In Right Straight
CMB2F
Single Out Left Straight
CMB1G
Double Out Left Straight
CMB2G
Single Out Right Straight
CMB1H
Double Out Right Straight
CMB2H
Example Model Number CMB1A CM1BA Single In unit
19
HOW TO SPECIFY
/
CliMb Collection Multi‐Level Seating
/
2) Specify Power (optional)
Power Unit Options *
3) Specify Non‐Skid Glides (optional)
Non‐Skid Glide Option
Option Code *
Cove Power Only COV2 (2 Pwr) COV4 (4 Pwr) Power / Charging USB COV1U (1 Pwr / 2 USB) COV3U (3 Pwr / 2 USB)
Silver
Black
COV2S COV4S
COV2B COV4B
White Gloss COV2W COV4W
COV1US COV3US
COV1UB COV3UB
COV1UW COV3UW
4) Specify Fabric
4a. Specify Fabric Source
Option Code *
3. Specify Non‐Skid Glides (set of 5)
2a. Specify Power Unit
/
Graded‐In CF Stinson Fabric Customer's Own Material
NSG
Code
GI COM
4b. Specify Fabric Information
Contrasting Fabric Applications ** SEAT/SIDE PANELS/BACK Fabric 4b) Specify Fabric Information 4b.1) Fabric Make 4b.2) Fabric Style/Pattern 4b.3) Fabric Color 4b.4) Fabric Number
2b. Specify Power Placement * Top Tier Placement
TT
Bottom Tier Placement
BT
Top and Bottom Tier Placement
TBT
* All COM fabrics require pre‐approval. A COM Approval Form must be completed and submitted with order.
Contrasting Fabric Applications ** SEAT Fabric 4b.1) Specify Fabric Information 4b.1a) Fabric Make 4b.1b) Fabric Style/Pattern 4b.1c) Fabric Color 4b.1d) Fabric Number
* Power Units not allowed on Corner CliMb units CMB1C and CMB1D.
SIDE PANELS Fabric 4b.2) Specify Fabric Information for SIDE PANELS 4b.2a) Fabric Make 4b.2b) Fabric Style/Pattern 4b.2c) Fabric Color 4b.2d) Fabric Number BACK Fabric 4b.3) Specify Fabric Information for BACK 4b.3a) Fabric Make 4b.3b) Fabric Style/Pattern 4b.3c) Fabric Color 4b.3d) Fabric Number * * All COM fabrics require pre‐approval. A COM Approval Form must be completed and submitted with order.
*** Vinyl; may be used for either the step or side panels of the CliMb units, not both. Railroad application only.
COV2S ‐ BT
/
COV2S ‐ BT Cove unit, Silver finish; placement in the bottom tier
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
NSG NSG Non‐Skid Glides
/
GI ‐ CF Stinson Ace 6548 Midnight (SEAT/BACK); CF Stinson Ace 6540 Char (SIDE PANELS) GI Graded in CF Stinson Fabric : Seat/Back is Ace 6548 Midnight; Side Panels are Ace 6540 Char
CLIMB MULTI‐LEVEL SEATING 20
CliMb Collection Price Guide Revision Summary
21
Date
Page(s)
Modification
04.14.17
1
Update : GSA Information
04.14.17 04.14.17
2 6
Update: Table of Contents Update: Graded In Fabrics
04.14.17 06.09.17 06.09.17
15‐16 2 4, 5
Added : Price Guide Revision Summary Update: Table of Contents
06.09.17
5
06.09.17
5
06.09.17 06.09.17 06.09.17 06.09.17 06.09.17 06.09.17
7 9, 10 9‐12 13 14 15‐18
Materials and Finishes : COM/COL Ordering Information Materials and Finishes : Fabric Approval Form Configurations Overview : Seating Overview : Power Options Overview : Contrasting Fabric Pricing
06.09.17
19‐20
How to Specify
06.20.17 09.18.17 09.18.17
6 6 12
Correction: Graded‐In Upholstery Materials and Finishes: Graded In Fabrics Overview: Image correction
Materials and Finishes : COM/COL Information Materials and Finishes : COM/COL Information
PRICE GUIDE REVISION SUMMARY
Description Contract information removed; Added statement and link to refer to Nevins website. http://nevins.co/Resources/GSA‐State‐Contracts Page reference for Revision Summary added. Removed : Arioso and Inside Track Added: Acadia Epingle, Sprint, Simplicity Section Added Table of Contents revised. Added Note "To allow for better yield and more efficient cutting, all COM fabrics must be supplied in continuous roll/yardage lengths, rather than cut pieces." Added COM yardage requirements for new CliMb units CMB1E, CMB1F, CMB1G, CMB1H, CMB2E, CMB2F, CMB2G & CMB2H. COM/COL ordering information revised. Revised Fabric Approval Form with updated instructions. "Configurations" removed. Seating "Overview" section was page 11; now is pages 9‐12 "Power Options" section was page 12; now is page 13 "Contrasting Fabric" section was page 12; now is page 14 Pricing and Model numbers for new units CMB1E, CMB1F, CMB1G, CMB1H, CMB2E, CMB2F CMB2G & CMB2H added. Pricing page was page 13; now is pages 15‐18 How to Specify instructions added for new units models CMB1E, CMB1F, CMB1G, CMB1H, CMB2E, CMB2F, CMB2G & CMB2H. How to Specify page was page 14; now is pages 19‐20. Listed by Grade section corrected; Acadia Epingle was llisted under Grade 14; Now is Grade 15. List updated; Cozy and Hive added, Cirque and Cielo removed. Images corrected for CMB2G and CMB2H
CliMb Collection Price Guide Revision Summary
Date
Page(s)
Modification
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
Description
CLIMB MULTI‐LEVEL SEATING 22