Apr 14, 2017 - Moxie **. Connect ***. Zodiac ***. StatâCon ***. Criss Cross ***. Vibe. *** vinyl. GRADEDâIN UPHOLSTE
PRICE LIST
Low Storage
2017
Updated 07.22.18
Cue Collection
Nevins Freight All prices are LIST, FREIGHT DELIVERED All prices are LIST. We reserve the right to change prices without prior notification at any time. There is a $99 minimum order surcharge for all orders less than $2,000 NET and for orders $2,000 NET and over, a Freight Fee equaling 5% of the orders NET value applies. Nevins reserves the right to add an additional surcharge for Custom or Stone Products. This surcharge will be calculated depending on the type, size and destination of the product.
Terms : Conditions : Warranty Please refer to nevins.co/Resources/TermsAndConditions
GSA Information For GSA net prices please refer to Nevins General Services Administration Approved Price Lists.
Contract Number ‐ GS‐28F‐0039P SIN 711‐2: SIN 711‐3: SIN 711‐11: SIN 711‐12: SIN 711‐16: SIN 711‐20:
Credenzas Multi‐Media Cabinets Conferencing Tables, Drums & Cubes, Multipurpose Tables, Occasional Tables Meeting & Training Tables, Table Carts Benches Lecterns, Visual/White Boards
Contract Number ‐ GS‐03F‐0001S SIN 722‐06:
Planters for Indoor Use
Contact Information GSA Contract Administrator B Nevins Ltd P.O. Box 108 Cat Spring, TX 78933 Phone (800) 231‐2744 Fax (713) 230‐2150
[email protected]
www.gsaadvantage.gov
Cue Collection Low Storage
Table of Contents GENERAL INFORMATION Freight Policy Terms | Conditions | Warranty GSA Information
MATERIALS AND FINISHES
1 1 1 3‐8
PRICING Low Mobile Pedestals
9
Low Wall Credenzas
10
Low Floor Credenzas Open Storage Doors Doors and Open Storage Drawers Drawers and Adjacent Open Storage Drawers and Open Upper Storage
11 12 13 14 15 16
Seat Cushions
17‐18
HOW TO SPECIFY
19‐20
Options
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
Cue Collection Materials and Finishes SPECIFICATIONS All specifications stated herein are subject to change without notice. Any product dimensions stated herein are nominal.
PRODUCT DETAILS Nevins Cue Collection includes Mobile Pedestals, Wall Mount Credenzas and free standing Floor Credenzas that offer a variety of open, closed and blended storage solutions.
Sizes and Compartments/Shells The Mobile Pedestals are 20"W x 16"D x 20"H. Nevins Low Credenzas are 16" deep, 20" high and are available in 4 different lengths, including 36", 48", 72" and 84". Credenzas 48", 72", 84"L include a 3/4" interior dividing partition to form separate compartments/shells. Credenzas 36"L have 1 compartment/shell.
PRODUCT DETAILS Cabinet Base Low Wall Credenzas have a finished bottom; finish matches the cabinet face finish. Low Floor Credenza include 2"H brushed aluminum legs. All bottom drawers include a 1 5/8", white plastic swivel caster mounted on the underside (center‐ front) of the drawer for easier opening and to prevent tipping under heavy loads. The Low Mobile Pedestal includes (2) locking (front) and (2) non‐locking (rear), twin wheel 2" black casters. The bottom drawer includes a 1 5/8", white plastic swivel caster mounted on the underside (center‐front) of the drawer for easier opening and to prevent tipping under heavy loads.
Wire Chase Cutouts Optional Wire Chase cutouts (3"H x 1 1/2"W) in the dividing partitions, to route wires from one shell to another, are available.
Exterior Surface
Seat Cushions
The Mobile Pedestal and Low Credenza's exterior is surfaced in laminate or maple/cherry veneer and has a 3/4" mitered self edge. Specify a single exterior finish for the cabinet face and wrap (top and end panels) or specify two exterior finishes, one finish for the face of the unit and another finish for the wrap (top and end panels).
Optional Seat Cushions are available; Choose from either a full or half seat cushion. The cushion is filled with 1" thick, medium density foam on top of a 1/2" mounting board. Cushion seats shipped installed. Upholstery options include COM, COL or Graded‐In CF Stinson fabrics. Railroad fabric application is standard. Cushion is sewn with single stitch seaming around the top perimeter and vertical single stitch seaming at all corners. Half seat cushions have a tufted accent seam centered horizontally 3.5" from the end of each cushion. Full seat cushions have (2) tufted accent seams centered horizontally 3.5" in from each end and 3.5" in from the cushion center. See additional upholstery information on pages 17‐18.
The Mobile Pedestal has a matching laminate/veneer cabinet back (matches cabinet face finish). Low Credenzas have a white melamine cabinet back; black melamine or an optional matching laminate/veneer back is available by request.
Interior Surface Mobile Pedestals and Low Credenza models LCK and LCL have matching laminate/veneer interior with white melamine drawer boxes; black melamine drawer boxes are available by request. Low Credenza models LCG and LCI have matching laminate/veneer interior. Low Credenza models LCH and LCJ have either white or black melamine interiors; please specify.
Grain Direction Exterior Surfaces
Grain direction is vertical on the exterior side walls and cabinet back; horizontal grain on the cabinet top. Credenza model LCH has vertical graining on the cabinet face. Mobile Pedestals and Credenza models LCI, LCJ, LCK and LCL have horizontal graining on the cabinet face. Interior Surfaces
Interior cabinet grain direction is horizontal for the shelving, back and the cabinet bottom; vertical for side walls and dividing partitions.
Shelving All open storage shelves are fixed. An adjustable shelf is included in all shells concealed by doors. Adjustable shelves adjust on 1 1/4" increments. Model LCH credenzas include 8 adjustment positions. Credenza model LCI include 3 adjustment positions.
Drawers Drawers operate smoothly using full extension, ball bearing suspension. Optional file hanger kits are available for the bottom drawer(s) of Mobile Pedestals and Low Credenza Models LCJ, LCK and LCL. All bottom drawers include a swivel caster wheel, mounted on the underside (center‐front) of the drawer for easier opening and to prevent tipping under heavy loads.
3 MATERIAL and FINISHES
Wall Mounting Hardware (Low Wall Credenzas) The cabinet back of the Low Wall Credenza is recessed 3/8" for flush, against‐the‐ wall mounting. The suspension hardware is a two‐part, interlocking, screw‐on rail system constructed of all steel. The rails contain multiple round and oval punches in the wall track for easy stud positioning. The cabinet mounting rail is shipped installed on the credenza back; the wall rail is field installed. It is required that installation of this product be performed by a qualified and experienced installer. Due to vast differences in building materials, wall anchors and fasteners are not provided by Nevins. It is the responsibility of the installer to provide the proper wall fasteners. Improper installation of this product could result in damage to the product, other equipment, or personal injury. Nevins cannot be held responsible for damage to equipment or personal injury resulting from improper fastening.
Weight Capacity (Low Wall Credenzas) (estimated; unit weight varies by style)
Maximum Allowed Content Weight
120 lbs. 165 lbs. 230 lbs. 360 lbs.
100 lbs. 100 lbs. 125 lbs. 125 lbs.
Unit Weight Credenza Length
36"L 48"L 72"L 84"L
MATERIALS and FINISHES Cabinet Core The cabinet interior case, back, dividing partitions, shelves and drawers are constructed of 3/4" high density, 45 lb. industrial grade particleboard or medium density fiber board (MDF). The exterior credenza top and sides are of 3/4" high density, 45 lb. industrial grade particleboard or medium density fiber board (MDF). All particleboard or MDF used in the construction meets are exceeds ANSI A208.1 and California Air Resources Board (CARB) Regulation 93120.2 Phase 1 and Phase 2 emission limits.
Cue Collection Materials and Finishes MATERIALS and FINISHES
Veneer
Cabinet Core (continued) Core Options NAUF core material is available; please contact Nevins Customer Service Department.
High Pressure Laminate The lamination process consists of laminate being adhered to the core material under pressure with a water‐based, formaldehyde‐free, low VOC adhesive. Select products have black or white melamine interiors.
Laminate Selection For laminates not included in our listing of “Standard Laminates”, please contact Nevins Customer Service Department to determine any applicable upcharges. While Nevins is an open laminate line, all laminates not included in our list of standard laminates, regardless of manufacturer or finish, are subject to upcharges. Standard Laminates Woodgrains Wild Cherry Solar Oak Beigewood Kensington Maple Fusion Maple Patterns White Nebula Grey Nebula Graphite Nebula Cloud Nebula White Tigris Titanium EV Silicon EV Nickel EV Tungsten EV Desert Zephyr Canyon Zephyr Misted Zephyr Loden Zephyr Twilight Zephyr Morro Zephyr Cloud Zephyr Shadow Zephyr Spiced Zephyr Solids Light Beige Antique White Frosty White Black Pepperdust Designer White White Sand Khaki Brown North Sea Slate Grey Dove Grey
MATERIALS and FINISHES
Wilsonart 7054.60 Wilsonart 7816.60 Wilsonart 7850.60 Wilsonart 10776.60 Wilsonart 7909.60 Wilsonart 4621.60 Wilsonart 4622.60 Wilsonart 4623.60 Wilsonart 4630.60 Wilsonart 4783.60 Wilsonart 4810.60 Wilsonart 4811.60 Wilsonart 4813.60 Wilsonart 4814.60 Wilsonart 4841.60 Wilsonart 4842.60 Wilsonart 4843.60 Wilsonart 4844.60 Wilsonart 4845.60 Wilsonart 4846.60 Wilsonart 4856.60 Wilsonart 4857.60 Wilsonart 4859.60 Wilsonart 1531.60 Wilsonart 1572.60 Wilsonart 1573.60 Wilsonart 1595.60 Wilsonart D327.60 Wilsonart D354.60 Wilsonart D403.60 Wilsonart D50‐60 Wilsonart D90.60 Wilsonart D91.60 Wilsonart D92.60
Samples Samples of all laminates are available directly from the laminate manufacturer.
Care and Maintenance for Laminates Clean plastic laminates with mild soap and warm water. Do not use steel wool, hot water, or any abrasive cleaning product.
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
Nevins veneer casegoods are constructed of flat cut, book‐matched, architectural grade maple or cherry veneer. The veneer is stained with a penetrating wood dye, followed by two coats of high solids pre‐catalyzed lacquer. The finish is hand sanded between coats of lacquer. Veneers have a semi‐open pore finish with a 35% sheen.
Veneer and Wood Finishes Finishes on Cherry Light Cherry Medium Cherry Dark Cherry Light Walnut Dark Walnut Medium Mahogany Finishes on Maple Fusion Maple Honey Maple Custom * Stain to Match
Finish Code
Laminate Equivalent
CLC CMC CDC CLW CDW CMM
WA 7919K.78 Amber Cherry Formica 7008.43 Acajou Mahogany Pionite WY351H Jewel Mahogany WA 7110K.78 Montana Walnut WA 7942.07 Cocobala WA 7922.07 Brighton Walnut
MFM MHM
WA 7909.60 Fusion Maple Pionite WM951 Honey Maple
STM
* Custom Finish Nevins can match most Wood and Veneer finishes. At the time of order, please provide Nevins with (2) labeled samples that are at least 3" x 3". Samples should be labeled with the customer's order reference number and sent to Nevins Customer Service Department : 14006 Newberg Rd, Cat Spring, TX 78933. Customer's stain to match samples will not be returned. Orders requiring a stain to match may extend the standard lead‐time.
Samples Samples of Nevins veneer/wood finishes are available directly from Nevins; Refer to www.nevins.co
Care and Maintenance for Veneer and Wood Treat with care, as you would with any fine furniture. Coasters should be used under glasses. We recommend damp dusting and occasional cleaning with a soft cloth and a high grade furniture polish that does not contain silicone.
Door/Drawer Hardware * All drawer and door hardware is factory installed. Door Hardware Model
H1 Haden
H2 Benina
H3 Serrate
TL Touch Latch
Size Finish
6 1/4"L x 1 3/8"D Satin Aluminum
2 3/4"L x 1 5/8"D Satin Aluminum
6"L x 1 3/8"D Satin Aluminum
Black
Drawer Hardware
Matches Door Hdwr
Matches Door Hdwr
Matches Door Hdwr
H2 Benina
* If hardware selection is not specified, Touch Latch door / Benina Drawer hardware will be provided.
Standard Placement for H1 and H3 pulls : Doors : Face Mounted Vertically 2 5/8" down from top, 1" in from side Drawers : Horizontal Mount on drawer face; Centered Standard Placement for H2 pulls : Doors : Top Edge Mounted Horizontally Flush at corner edge Drawers : Top Edge Mounted Horizontally; Centered
CUE COLLECTION 4
Cue Collection Materials and Finishes MATERIALS and FINISHES
MATERIALS and FINISHES
Door/Drawer Locks
Grommets
Optional door/drawer locks are available. Doors on 36", 72" and 84"L credenzas will have 1 shared lock per pair of doors. Doors on 48"L credenzas will have 1 lock per door. Drawers will each have 1 lock per drawer. Locks are keyed alike. Random keying is available and must be requested at the time of order. Door locks are not available with touch latch hardware. Lock Finish
Finish Code
Black Silver
SCLKB SCLKS
Cue Credenza Leg (Floor Credenzas only)
Credenzas 36"L Credenzas 48"L Credenzas 72"L Credenzas 84"L
Plastic Grommet
Applications
Metal Grommet
The Cue leg is 3/4"D x 1 3/4"D x 2"H, has a brushed aluminum finish and includes a white nylon glide. Leg Quantities
Optional grommets are available in either the shelving, credenza top or the cabinet back (floor credenzas only).
Dimensions PGB / PGB / PGG MGA Specifications PGB / PGB / PGG
Leg Qty
MGA
4 4 6 6
Casters
Placement
Model
Finish
Material
PGB PGG PGW MGA
Black Grey White Satin Aluminum
Plastic Plastic Plastic Metal
Cabinet Top : Cabinet Back (Floor Credenzas only) : Interior Shelf 3" Dia Outside; 2 1/4" Dia Inside 3 ½" Dia Outside; 1 1/4" Dia Inside Unique 3‐piece top that allows adjustable hole openings. Lid opening has brushed access hole; Slot is 2" x 7/8" A drawing specifying the grommet location at the time of order placement is required.
Wire Chase Cutouts The Low Mobile Pedestal includes (2) locking (front) and (2) non‐locking (rear), twin wheel 2" black casters. The bottom drawer of the Mobile Pedestals and Credenza models LCI, LCL and LCK include a 1 5/8", white plastic swivel caster mounted on the underside (center‐front) of the drawer for easier opening and to prevent tipping under heavy loads.
Optional Wire Chase cutouts (3"H x 1 1/2"D) in the dividing partitions, to route wires from one shell to another, are available.
Cushion Seats Optional Cushion Seats are available on Low Mobile Pedestals and Low Floor Credenzas. Choose from either a full or half seat cushion. Upholstery options include COM, COL or Graded‐In CF Stinson fabrics.
Ventilation Kit An optional ventilation kit, consisting of (2) 8 15/16"L x 2 5/8"H black plastic ventilation grills and (1) 3" dia. black plastic grommet is available with Low Floor Credenzas. Please advise desired placement at the time of order. Not available with Low Wall Credenzas.
Half Cushion Seat
Cabinet Cooling Fan An optional cabinet cooling fan is available and consists of (1) thermostatic controlled cooling fan and 1 grommet in the cabinet back. Finish Dimensions Ships
Specifications
Beige Housing / Chocolate Brown Blades 3.62" x 3.62" x 1" Fan and grommet ship installed; thermo controller and sensor are field installed. Thermostatic controlled, low noise, Cabinet Cooling Fan turns on automatically when interior cabinet temperature exceeds 87°F; turns off when temperature drops below 80°F. Beveled blade design achieves an exceptional level of airflow and static pressure Power supply features • 4 pin Molex adapter with 40" Power Lead • 6 ft ‐ 110V power cord • UL Listed * Not available with Low Wall Credenzas
5 MATERIAL and FINISHES
Full Cushion Seat
Credenza Size 36"W x 16"D x 20"H Half Cushion Full Cushion 48"W x 16"D x 20"H Half Cushion Full Cushion 72"W x 16"D x 20"H Half Cushion Full Cushion 84"W x 16"D x 20"H Half Cushion Full Cushion Mobile Pedestal Size 20"W x 16"D x 20"H Full Cushion
The cushion is filled with 1" thick, medium density foam on top of a 1/2" mounting board. Cushion is sewn with single stitch seaming around the top perimeter and vertical single stitch seaming at all corners. Half seat cushions have a tufted accent seam centered horizontally 3.5" from the end of each cushion. Full seat cushions have (2) tufted accent seams centered horizontally 3.5" in from each end and 3.5" in from the cushion center. Ships installed.
COM Yds
Model
18"L x 16"D x 1 ½"T 36"L x 16"D x 1 ½"T
1 1
CSH18 CSF36
24"L x 16"D x 1 ½"T 48"L x 16"D x 1 ½"T
1 2
CSH24 CSF48
36"L x 16"D x 1 ½"T 72"L x 16"D x 1 ½"T
1 2
CSH36 CSF72
42"L x 16"D x 1 ½"T 84"L x 16"D x 1 ½"T
2 3
CSH42 CSF84
20"L x 16"D x 1 ½"T
1
CSF20
Cushion Size
Cue Collection Materials and Finishes UPHOLSTERY
UPHOLSTERY (continued)
Upholstery General Information
Customer COM/COL (continued)
Nevins upholstered seat cushions are available with Graded‐In C.F. Stinson fabrics or with the Customer's Own Material (COM) or Leather (COL). See cushion seat construction information on pages 17‐18.
Upholstery Application All fabrics, including Graded‐In, COM and COL will be cut, seamed and applied at the discretion of the factory. Railroad application is the standard method. Any special instructions regarding the application of the fabric (pattern, direction, face side, etc.) must be indicated on your order. In the absence of instructions, Nevins will apply the fabric at our own discretion, without liability.
Fabric and Leather Imperfections Nevins reserves the right to reject any fabric deemed unsuitable for upholstery purposes. Nevins inspects fabrics for mill imperfections, however, Nevins will not be held responsible for defects, color inaccuracies, dye lot variations or other such flaws. Leather is a natural product. Imperfections such as wrinkles and scars are considered normal and acceptable. Nevins is not responsible for the placement or appearance of these markings. Customer's leather must meet minimum standards of no more than three defects per hide. Imperfections that penetrate the hide, large marks, brands, excessively healed‐over scars or scratches, burns and excessive fat wrinkles are considered unacceptable defects.
Puddling Puddling may occur as a result of certain climate conditions and/or the natural stretch inherent in fabrics and leathers. Puddling is not a flaw in the fabric, leather or manufacturing process. Nevins cannot predict or be responsible for how upholstery wears in an installation setting and does not guarantee against puddling.
Fabric Warranty Nevins will not be held responsible for wear, fading, performance, appearance, behavior, flame retardency or durability of any fabrics or leather whether supplied by the Customer or by Nevins. Graded‐In, COM or COL fabrics are not covered under Nevins Warranty.
Striped or Patterned Fabric For striped or patterned fabrics, specify vertical or horizontal application. In the absence of instructions, Nevins will apply the fabric pattern at our own discretion without liability.
Pattern Matching Should a COM be striped or have a pattern repeat requiring matching, a matching charge may apply. Please contact Nevins Customer Service Department.
Reversible Fabrics For reversible fabrics, a swatch of the COM must be provided to Nevins, clearly indicating which side should be exposed. In the absence of instructions, the factory will apply material at their own discretion without liability.
Backing Requirements Not all fabrics are suitable for upholstery and some may require an acrylic backing to prevent unraveling or stretching. This is determined when the fabric arrives and is inspected. When this occurs, the customer will be notified of the applicable fees. 3a) COM Recommended Yardage Requirements The yardage requirements listed herein are for one cushion seat. Yardage requirements listed are for non‐directional fabrics based on 54" wide fabric. Generally, additional yardage is required if fabric is striped, patterned, requires matching, or if width of material is less than 54" wide. Please use the additional yardage requirement chart below to determine COM yardage / COL square footage requirements. Add the percentage shown on the chart to the standard yardage requirement. The below chart must be considered as an estimate only. Nevins is not responsible for overages or if additional yardage is required. Please contact Nevins Customer Service Department for assistance in determining yardage. Standard COM Yardage Requirements See product pricing page for COM Yardage requirements.
Multiple Quantities When ordering multiple quantities, yardage requirements may be reduced. Please contact Nevins Customer Service Department for yardage requirements on multiple quantities.
Customer COM/COL Upon receipt of a COM/COL order, Nevins will provide COM/COL shipping instructions. COM/COL orders cannot be scheduled for production or acknowledged with a ship date until the upholstery has been received, inspected and approved by Nevins. All COM/COL shipments must be shipped prepaid.
Ordering COM/COL 1) Provide Fabric/Leather Information (must be indicated on order) 1a) Fabric Make 1b) Fabric Style/Pattern 1c) Fabric Color 1d) Fabric Number 2) Provide Special Application Instructions Any special instructions regarding the application of the fabric must be indicated on your order. In the absence of instructions, Nevins will apply the fabric at our own discretion, without liability.
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
Additional COM Yardage Requirements Railroad Applications (Standard) Repeat Fabric Non‐Directional Width Fabric 1‐5" 6‐9" 10‐13" 14‐20" 54" 50" 48"
0% 15% 20%
0 0.15 0.2
15% 20% 25%
18% 25% 30%
25% 30% 35%
30% 35% 40%
21‐27"
28‐36"
35% 40% 45%
40% 45% 50%
Right‐Way (Up the Roll) Applications (Optional; Must be Requested) Repeat Fabric Non‐Directional Width Fabric 1‐5" 6‐9" 10‐13" 14‐20" 21‐27" 54" 50" 48"
0% 15% 20%
Right‐Way Application
10% 15% 20%
15% 20% 25%
20% 25% 30%
25% 30% 35%
30% 35% 40%
28‐36" 35% 40% 45%
Railroad Application
3b) COL Square Footage Requirements To determine the number of square feet of leather required, multiply the COM yardage by 18. All square footage requirements are based on usable footage; the shape of the hide and the usable , clean footage may make it necessary for us to request more leather after COL is received.
CUE COLLECTION 6
Cue Collection Materials and Finishes GRADED‐IN UPHOLSTERY
FABRIC LISTING BY GRADE
Graded‐In Fabric Designs from CF Stinson Nevins offers seat cushions with select patterns of graded‐in CF Stinson upholstery. All fabric patterns are subject to the availability of the fabric from CF Stinson. CF Stinson reserves the right to discontinue any pattern or color from their libraries. For all patterns not listed, please contact Nevins Customer Service Department. To view patterns and colorways or to order memo samples, please refer to www.cfstinson.com
Refer to our website to view the library of Nevins Graded‐In CF Stinson Fabrics. https://www.nevins.co/Products/Storage‐Presentation/Cue/Finishes#Finishes‐Options:selected=.fabric‐manufacturers
7 MATERIAL and FINISHES
Cue Collection Materials and Finishes GRADED‐IN UPHOLSTERY
FABRIC LISTING BY PATTERN NAME
Graded‐In Fabric Designs from CF Stinson Nevins offers seat cushions with select patterns of graded‐in CF Stinson upholstery. All fabric patterns are subject to the availability of the fabric from CF Stinson. CF Stinson reserves the right to discontinue any pattern or color from their libraries. For all patterns not listed, please contact Nevins Customer Service Department. To view patterns and colorways or to order memo samples, please refer to www.cfstinson.com
Refer to our website to view the library of Nevins Graded‐In CF Stinson Fabrics. https://www.nevins.co/Products/Storage‐Presentation/Cue/Finishes#Finishes‐Options:selected=.fabric‐manufacturers
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CUE COLLECTION 8
Cue Collection Low Mobile Pedestals Low Mobile Pedestals Drawers 20"W x 16"D x 20"H
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
$1,385 LPJ2016C/L1
$1,541 LPJ2016C/L2
$1,650 LPJ2016C/V1
$1,931 LPJ2016C/V2
Drawer & Open Storage 20"W x 16"D x 20"H
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
$1,291 LPL2016C/L1
$1,440 LPL2016C/L2
$1,545 LPL2016C/V1
$1,815 LPL2016C/V2
Features
Options Storage Drawers 2 1
LPJ2016C LPL2016C
Open Storage Compartments 0 1
Casters 5 5
Exterior / Interior / Cabinet Back Finishes Veneer / Laminate Pedestals Exterior : Specify a single exterior finish for the cabinet face and wrap (top and end panels) or specify two exterior finishes, one finish for the face of the unit and another finish for the wrap (top and end panels). Interior : Model LPJ The interior finish, including the drawer boxes, is white or black melamine; please specify Black Melamine White Melamine
MB MW
Model LPL The interior finish matches the drawer face finish. The drawer box is white melamine; black melamine available by request. Cabinet Back : The exterior cabinet back finish matches the drawer face finish.
Cushion Seat Options
pages 17‐18
9 LOW MOBILE PEDESTALS : LOW WALL CREDENZAS
Option Code
List $
Custom Finish Options STM 368 Stain to Match per stain Matching Interior (in lieu of melamine; matches drawer face finish; Model L ML1 +12% Laminate per unit MV1 +15% Veneer per unit Wire Management Options Grommets Black ‐ Plastic Grey ‐ Plastic White ‐ Plastic Satin Aluminum ‐ Metal Drawer Options Locks Black Silver File Hanger Kit Front‐to‐Back Letter
PGB PGG PGW MGA
38 38 38 116
per each per each per each per each
SCLKB SCLKS
119 119
per each per each
FILE 1
112
per drawer
Cue Collection Low Wall Credenzas Low Wall Credenzas Closed Storage Doors 36"W x 16"D x 20"H
laminate
48"W x 16"D x 20"H
veneer
veneer
laminate
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$2,307 LCH3616W/L1
$2,569 LCH3616W/L2
$2,688 LCH3616W/V1
$3,151 LCH3616W/V2
$2,562 LCH4816W/L1
$2,856 LCH4816W/L2
$3,027 LCH4816W/V1
$3,551 LCH4816W/V2
72"W x 16"D x 20"H
laminate
84"W x 16"D x 20"H
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$3,628 LCH7216W/L1
$4,035 LCH7216W/L2
$4,413 LCH7216W/V1
$5,166 LCH7216W/V2
$3,758 LCH8416W/L1
$4,181 LCH8416W/L2
$4,957 LCH8416W/V1
$5,808 LCH8416W/V2
Features LCH3616W LCH4816W LCH7216W LCH8416W
Shells / Dividing Partition 1 / 0 2 / 1 2 / 1 2 / 1
Doors 2 2 4 4
Adjustable Closed Storage Shelves Compartments 1 1 2 2 2 2 2 2
Exterior / Interior / Cabinet Back Finishes Veneer / Laminate Credenzas Exterior : Specify a single exterior finish for the cabinet face and wrap (top and end panels) or specify two exterior finishes, one finish for the face of the unit and another finish for the wrap (top and end panels). Interior / Cabinet Back : The exterior cabinet back and Interior finish is white or black melamine; please specify. Black Melamine White Melamine
MB MW
Options
Option Code
List $
Custom Finish Options STM 368 Stain to Match Finished Back (in lieu of melamine; matches cabinet face finish) LBACK +6% Laminate VBACK +9% Veneer Matching Interior (in lieu of melamine; matches cabinet face finish) ML1 +12% Laminate MV1 +15% Veneer
per stain per unit per unit per unit per unit
Wire Management Options Grommets (placement in bottom or left/right end panels; please specify) PGB 38 Black ‐ Plastic PGG 38 Grey ‐ Plastic PGW 38 White ‐ Plastic MGA 116 Satin Aluminum ‐ Metal 32 Dividing Panel Wire Chase 3"H x 1 ½"D * WM9
per each per each per each per each per each
Door Options Locks ** Black Silver
per each per each
SCLKB SCLKS
119 119
* Not available with 36"W credenza. ** Not available with TL touch latch door hardware.
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CUE COLLECTION 10
Cue Collection Low Floor Credenzas Low Floor Credenzas Open Storage 36"W x 16"D x 20"H
48"W x 16"D x 20"H
laminate
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$2,260 LCG3616L/L1
$2,509 LCG3616L/L2
$2,613 LCG3616L/V1
$3,050 LCG3616L/V2
$2,469 LCG4816L/L1
$2,743 LCG4816L/L2
$2,939 LCG4816L/V1
$3,434 LCG4816L/V2
72"W x 16"D x 20"H
84"W x 16"D x 20"H
laminate
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$3,441 LCG7216L/L1
$3,820 LCG7216L/L2
$4,227 LCG7216L/V1
$4,937 LCG7216L/V2
$3,562 LCG8416L/L1
$3,956 LCG8416L/L2
$4,678 LCG8416L/V1
$5,470 LCG8416L/V2
Features
LCG3616 LCG4816 LCG7216 LCG8416
Options Shells / Dividing Partition 1 / 0 2 / 1 2 / 1 2 / 1
Doors 0 0 0 0
Fixed Shelves 1 2 2 2
Open Storage Compartments 2 4 4 4
Legs 4 4 6 6
Exterior / Interior / Cabinet Back Finishes Veneer / Laminate Credenzas Exterior : Specify a single exterior finish for the cabinet face and wrap (top and end panels) or specify two exterior finishes, one finish for the face of the unit and another finish for the wrap (top and end panels). Cabinet Back : The exterior cabinet back is white melamine; black melamine available by request only.
Cushion Seat Options
11 LOW FLOOR CREDENZAS
pages 17‐18
Option Code
List $
Custom Finish Options STM 368 Stain to Match per stain Finished Back (in lieu of melamine; matches cabinet face/interior finish) LBACK +6% Laminate per unit VBACK +9% Veneer per unit Wire Management Options Grommets Black ‐ Plastic Grey ‐ Plastic White ‐ Plastic Satin Aluminum ‐ Metal Dividing Panel Wire Chase 3"H x 1 ½"D * * Not available with 36"W credenza.
PGB PGG PGW MGA WM9
38 38 38 116 32
per each per each per each per each per each
Cue Collection Low Floor Credenzas Low Floor Credenzas Doors 36"W x 16"D x 20"H
laminate
48"W x 16"D x 20"H
laminate
veneer
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$2,451 LCH3616L/L1
$2,709 LCH3616L/L2
$2,823 LCH3616L/V1
$3,276 LCH3616L/V2
$2,707 LCH4816L/L1
$2,995 LCH4816L/L2
$3,158 LCH4816L/V1
$3,672 LCH4816L/V2
72"W x 16"D x 20"H
laminate
84"W x 16"D x 20"H
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$3,846 LCH7216L/L1
$4,246 LCH7216L/L2
$4,613 LCH7216L/V1
$5,352 LCH7216L/V2
$3,962 LCH8416L/L1
$4,376 LCH8416L/L2
$5,143 LCH8416L/V1
$5,977 LCH8416L/V2
Features LCH3616 LCH4816 LCH7216 LCH8416
Shells / Dividing Partition 1 / 0 2 / 1 2 / 1 2 / 1
Doors 2 2 4 4
Adjustable Closed Storage Shelves Compartments 1 1 2 2 2 4 2 4
Options Legs 4 4 6 6
Exterior / Interior / Cabinet Back Finishes Veneer / Laminate Credenzas Exterior : Specify a single exterior finish for the cabinet face and wrap (top and end panels) or specify two exterior finishes, one finish for the face of the unit and another finish for the wrap (top and end panels). Interior / Cabinet Back : The exterior cabinet back and interior finish is white or black melamine; please specify. Black Melamine White Melamine
Cushion Seat Options
MB MW
pages 17‐18
Option Code
Custom Finish Options STM 368 Stain to Match Finished Back (in lieu of melamine; matches cabinet face finish) LBACK +6% Laminate VBACK +9% Veneer Matching Interior (in lieu of melamine; matches cabinet face finish) +12% ML1 Laminate MV1 +15% Veneer Wire Management Options Grommets Black ‐ Plastic Grey ‐ Plastic White ‐ Plastic Satin Aluminum ‐ Metal Dividing Panel Wire Chase 3"H x 1 ½"D * Cabinet Ventilation Options Ventilation Kit Cabinet Cooling Fan
per stain per unit per unit per unit per unit
PGB PGG PGW MGA WM9
38 38 38 116 32
per each per each per each per each per each
VK CFK
195 505
per each per each
119 119
per each per each
Door Options Locks ** SCLKB Black SCLKS Silver * Not available with 36"W credenza. ** Not available with TL touch latch door hardware.
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
List $
CUE COLLECTION 12
Cue Collection Low Floor Credenzas Low Floor Credenzas Doors & Open Upper Storage 36"W x 16"D x 20"H
laminate
48"W x 16"D x 20"H
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$2,817 LCI3616L/L1
$3,119 LCI3616L/L2
$3,258 LCI3616L/V1
$3,790 LCI3616L/V2
$3,119 LCI4816L/L1
$3,457 LCI4816L/L2
$3,650 LCI4816L/V1
$4,253 LCI4816L/V2
72"W x 16"D x 20"H
laminate
84"W x 16"D x 20"H
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$4,425 LCI7216L/L1
$4,895 LCI7216L/L2
$5,479 LCI7216L/V1
$6,373 LCI7216L/V2
$4,559 LCI8416L/L1
$5,045 LCI8416L/L2
$5,958 LCI8416L/V1
$6,938 LCI8416L/V2
Features
LCI3616 LCI4816 LCI7216 LCI8416
Options Shells / Dividing Partition 1 / 0 2 / 1 2 / 1 2 / 1
Doors 2 2 4 4
Adjustable Open Storage Compartments Shelves 1 1 2 2 2 2 2 2
Legs 4 4 6 6
Exterior / Interior / Cabinet Back Finishes Veneer / Laminate Credenzas Exterior : Specify a single exterior finish for the cabinet face and wrap (top and end panels) or specify two exterior finishes, one finish for the face of the unit and another finish for the wrap (top and end panels). Interior : The interior finish matches exterior face finish. Cabinet Back : The exterior cabinet back is white melamine; black melamine available by request only.
Cushion Seat Options
pages 17‐18
Option Code
Custom Finish Options STM 368 Stain to Match Finished Back (in lieu of melamine; matches cabinet face finish) LBACK +6% Laminate VBACK +9% Veneer
per unit per unit
Wire Management Options Grommets Black ‐ Plastic Grey ‐ Plastic White ‐ Plastic Satin Aluminum ‐ Metal Dividing Panel Wire Chase 3"H x 1 ½"D * Cabinet Ventilation Options Ventilation Kit Cabinet Cooling Fan Door Options Locks ** Black Silver
per stain
PGB PGG PGW MGA WM9
38 38 38 116 32
per each per each per each per each per each
VK CFK
195 505
per each per each
SCLKB SCLKS
119 119
per each per each
* Not available with 36"W credenza. ** Not available with TL touch latch door hardware.
13 LOW FLOOR CREDENZAS
List $
Cue Collection Low Floor Credenzas Low Floor Credenzas Drawers 36"W x 16"D x 20"H
laminate
48"W x 16"D x 20"H
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$3,369 LCJ3616L/L1
$3,723 LCJ3616L/L2
$3,753 LCJ3616L/V1
$4,353 LCJ3616L/V2
$4,235 LCJ4816L/L1
$4,665 LCJ4816L/L2
$4,699 LCJ4816L/V1
$5,428 LCJ4816L/V2
72"W x 16"D x 20"H
laminate
84"W x 16"D x 20"H
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$5,597 LCJ7216L/L1
$6,179 LCJ7216L/L2
$6,904 LCJ7216L/V1
$8,013 LCJ7216L/V2
$5,717 LCJ8416L/L1
$6,313 LCJ8416L/L2
$6,933 LCJ8416L/V1
$8,047 LCJ8416L/V2
Features
Options
Shells / Dividing Partition 1 / 0 2 / 1 2 / 1 2 / 1
LCJ3616 LCJ4816 LCJ7216 LCJ8416
Drawers 2 4 4 4
Legs 4 4 6 6
Exterior / Interior / Cabinet Back Finishes Veneer / Laminate Credenzas Exterior : Specify a single exterior finish for the cabinet face and wrap (top and end panels) or specify two exterior finishes, one finish for the face of the unit and another finish for the wrap (top and end panels). Interior / Cabinet Back : The exterior cabinet back, interior and drawer boxes, are white or black melamine; please specify. Black Melamine White Melamine
Cushion Seat Options
MB MW
pages 17‐18
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
Option Code
List $
Custom Finish Options STM 368 Stain to Match Finished Back (in lieu of melamine; matches cabinet face finish) LBACK +6% Laminate VBACK +9% Veneer Matching Interior (in lieu of melamine; matches cabinet face finish) ML1 +12% Laminate MV1 +15% Veneer Wire Management Options Grommets Black ‐ Plastic Grey ‐ Plastic White ‐ Plastic Satin Aluminum ‐ Metal Drawer Options Locks Black Silver File Hanger Kit (bottom drawers only) Side‐to‐Side Letter
per stain per unit per unit per unit per unit
PGB PGG PGW MGA
38 38 38 116
per each per each per each per each
SCLKB SCLKS
119 119
per each per each
FILE2
112
per drawer
CUE COLLECTION 14
Cue Collection Low Floor Credenzas Low Floor Credenzas Drawers & Adjacent Open Storage 48"W x 16"D x 20"H
laminate
72"W x 16"D x 20"H
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$3,820 LCK4816L/L1
$4,228 LCK4816L/L2
$4,265 LCK4816L/V1
$4,957 LCK4816L/V2
$5,129 LCK7216L/L1
$5,683 LCK7216L/L2
$5,891 LCK7216L/V1
$6,859 LCK7216L/V2
84"W x 16"D x 20"H
laminate
Features LCK4816 LCK7216 LCK8416
Shells / Dividing Partition 2 / 1 2 / 1 2 / 1
Drawers 2 2 2
veneer
single finish
two‐tone finish
single finish
two‐tone finish
$5,249 LCK8416L/L1
$5,817 LCK8416L/L2
$6,418 LCK8416L/V1
$7,480 LCK8416L/V2
Open Storage Fixed Shelf Compartments 1 2 1 2 1 2
Options Legs 4 6 6
Exterior / Interior / Cabinet Back Finishes Veneer / Laminate Credenzas Exterior : Specify a single exterior finish for the cabinet face and wrap (top and end panels) or specify two exterior finishes, one finish for the face of the unit and another finish for the wrap (top and end panels). Interior : The interior finish matches the exterior drawer face finish. The drawer boxes are white melamine; black melamine available by request. Cabinet Back : The exterior cabinet back is white melamine; black melamine available by request only.
Cushion Seat Options
15 LOW FLOOR CREDENZAS
pages 17‐18
Option Code
List $
Custom Finish Options STM 368 Stain to Match Finished Back (in lieu of melamine; matches cabinet face finish) LBACK +6% Laminate VBACK +9% Veneer
per unit per unit
Wire Management Options Grommets Black ‐ Plastic Grey ‐ Plastic White ‐ Plastic Satin Aluminum ‐ Metal Drawer Options Locks Black Silver File Hanger Kit (bottom drawer only) Side‐to‐Side Letter
per stain
PGB PGG PGW MGA
38 38 38 116
per each per each per each per each
SCLKB SCLKS
119 119
per each per each
FILE2
112
per drawer
Cue Collection Low Floor Credenzas Low Floor Credenzas Drawers & Open Upper Storage 36"W x 16"D x 20"H
laminate
48"W x 16"D x 20"H
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$2,865 LCL3616L/L1
$3,172 LCL3616L/L2
$3,229 LCL3616L/V1
$3,756 LCL3616L/V2
$3,877 LCL4816L/L1
$4,292 LCL4816L/L2
$4,323 LCL4816L/V1
$5,025 LCL4816L/V2
72"W x 16"D x 20"H
laminate
84"W x 16"D x 20"H
veneer
laminate
veneer
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
single finish
two‐tone finish
$5,187 LCL7216L/L1
$5,748 LCL7216L/L2
$5,948 LCL7216L/V1
$6,927 LCL7216L/V2
$5,306 LCL8416L/L1
$5,882 LCL8416L/L2
$6,475 LCL8416L/V1
$7,548 LCL8416L/V2
Features
LCL3616 LCL4816 LCL7216 LCL8416
Options Shells / Dividing Partition 1 / 0 2 / 1 2 / 1 2 / 1
Drawers 1 2 2 2
Open Storage Compartments 1 2 2 2
Legs 4 4 6 6
Exterior / Interior / Cabinet Back Finishes Veneer / Laminate Credenzas Exterior : Specify a single exterior finish for the cabinet face and wrap (top and end panels) or specify two exterior finishes, one finish for the face of the unit and another finish for the wrap (top and end panels). Interior : The interior finish matches the exterior drawer face finish. The drawer boxes are white melamine; black melamine available by request. Cabinet Back : The exterior cabinet back is white melamine; black melamine available by request only.
Cushion Seat Options
Option Code
List $
Custom Finish Options STM 368 Stain to Match Finished Back (in lieu of melamine; matches cabinet face finish) LBACK +6% Laminate VBACK +9% Veneer
per unit per unit
Wire Management Options Grommets Black ‐ Plastic Grey ‐ Plastic White ‐ Plastic Satin Aluminum ‐ Metal Drawer Options Locks Black Silver File Hanger Kit Side‐to‐Side Letter
per stain
PGB PGG PGW MGA
38 38 38 116
per each per each per each per each
SCLKB SCLKS
119 119
per each per each
FILE2
112
per drawer
pages 17‐18
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CUE COLLECTION 16
Cue Collection Cushion Seats
Cushion Seat (optional) Customers Own COM Fabric
Cushion Size (nominal)
Option Code
Vinyl
COM Yards
COL Leather
Graded‐In CF Stinson Grade 1
Grade 2
COL Sq. Ft.
Grade 3
Grade 4
Grade 5
Grade 6
Grade 7
List $ per cushion (add onto credenza/mobile pedestal list $)
Credenza Size * 36"W x 16"D x 20"H Half Seat Cushion
18"L x 16"D x 1 ½"T
CSH18
1
18
287
316
326
359
368
376
389
401
417
Full Seat Cushion
36"L x 16"D x 1 ½"T
CSF36
2
36
437
481
515
580
597
613
641
665
697
48"W x 16"D x 20"H Half Seat Cushion
24"L x 16"D x 1 ½"T
CSH24
1
18
305
336
344
377
385
393
407
419
435
Full Seat Cushion
48"L x 16"D x 1 ½"T
CSF48
2
36
486
534
564
628
646
662
690
713
746
72"W x 16"D x 20"H Half Seat Cushion
36"L x 16"D x 1 ½"T
CSH36
2
36
437
481
515
580
597
613
641
665
697
Full Seat Cushion
72"L x 16"D x 1 ½"T
CSF72
2
36
668
735
746
811
828
844
872
896
928
84"W x 16"D x 20"H Half Seat Cushion
42"L x 16"D x 1 ½"T
CSH42
2
36
464
510
542
606
624
640
668
691
723
Full Seat Cushion
84"L x 16"D x 1 ½"T
CSF84
3
54
712
783
829
926
953
977
1018
1054
1102
20"L x 16"D x 1 ½"T
CSF20
1
18
294
324
333
365
374
382
396
408
424
Mobile Pedestal Size * 20"W x 16"D x 20"H Full Seat Cushion
* The addition of a cushion seat, increases the overall height of the credenza/pedestal by 1 ½".
Standard Features • Available on Low Mobile Pedestals or Floor Credenzas. • Choose from either a full or half seat cushion on credenzas; full seat cushions for mobile pedestals. • The cushion is filled with 1" thick, medium density foam on top of a 1/2" mounting board. • Upholstery options include COM, COL or Graded‐In CF Stinson fabrics. Refer to pages 7‐8 for a complete list of Graded‐In CF Stinson fabrics. • Railroad fabric application is standard. • Cushion is sewn with single stitch seaming around the top perimeter and vertical single stitch seaming at all corners. Half seat cushions and the mobile pedestal cushions have a tufted accent seam 3.5" in from the end of each cushion. Full seat cushions have (2) tufted accent seams centered horizontally 3.5" in from each end and 3.5" in from the cushion center. • Cushion Seats ship installed.
17 CUSHION SEATS
Cue Collection Cushion Seats
Cushion Seat (optional) Graded‐In CF Stinson Grade 8 Cushion Size (nominal)
Option Code
COM Yards
Grade 9
Grade 10
Grade 11
COL Sq. Ft.
Grade 12
Grade 13
Grade 14
Grade 15
Grade 16
List $ per cushion (add onto credenza/mobile pedestal list $)
Credenza Size * 36"W x 16"D x 20"H Half Seat Cushion
18"L x 16"D x 1 ½"T
CSH18
1
18
435
445
463
476
499
520
541
608
1292
Full Seat Cushion
36"L x 16"D x 1 ½"T
CSF36
2
36
732
753
788
813
861
903
945
1078
2446
48"W x 16"D x 20"H Half Seat Cushion
24"L x 16"D x 1 ½"T
CSH24
1
18
453
463
481
493
517
538
559
626
1310
Full Seat Cushion
48"L x 16"D x 1 ½"T
CSF48
2
36
781
802
837
862
910
951
994
1127
2495
72"W x 16"D x 20"H Half Seat Cushion
36"L x 16"D x 1 ½"T
CSH36
2
36
732
753
788
813
861
903
945
1078
2446
Full Seat Cushion
72"L x 16"D x 1 ½"T
CSF72
2
36
963
984
1019
1044
1092
1134
1176
1309
2677
84"W x 16"D x 20"H Half Seat Cushion
42"L x 16"D x 1 ½"T
CSH42
2
36
758
779
815
840
888
929
972
1104
2472
Full Seat Cushion
84"L x 16"D x 1 ½"T
CSF84
3
54
1155
1186
1239
1277
1348
1411
1474
1674
3725
20"L x 16"D x 1 ½"T
CSF20
1
18
442
452
470
482
506
527
548
615
1299
Mobile Pedestal Size * 20"W x 16"D x 20"H Full Seat Cushion
* The addition of a cushion seat, increases the overall height of the credenza/pedestal by 1 ½".
Standard Features • Available on Low Mobile Pedestals or Floor Credenzas. • Choose from either a full or half seat cushion on credenzas; full seat cushions for mobile pedestals. • The cushion is filled with 1" thick, medium density foam on top of a 1/2" mounting board. • Upholstery options include COM, COL or Graded‐In CF Stinson fabrics. Refer to pages 7‐8 for a complete list of Graded‐In CF Stinson fabrics. • Railroad fabric application is standard. • Cushion is sewn with single stitch seaming around the top perimeter and vertical single stitch seaming at all corners. Half seat cushions and the mobile pedestal cushions have a tufted accent seam 3.5" in from the end of each cushion. Full seat cushions have (2) tufted accent seams centered horizontally 3.5" in from each end and 3.5" in from the cushion center. • Cushion Seats ship installed.
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
CUE COLLECTION 18
Cue Collection How to Specify 1) Specify Model Number
Mobile Pedestal
model
drawers 20"W x 16"D x 20"H
2) Specify Exterior Finish Coding
/
Low Floor Credenzas
Single Finish Applications
model
code
(standard; specify 2a and one finish only from section 2b )
doors & open upper storage =
LPJ2016C
36"W x 16"D x 20"H
=
LCI3616L
2a. Specify Single Finish Code Laminate Veneer
drawer & open upper storage
48"W x 16"D x 20"H
=
= =
84"W x 16"D x 20"H
model
=
84"W x 16"D x 20"H
Low Floor Credenzas
=
LCI8416L
48"W x 16"D x 20"H
72"W x 16"D x 20"H
84"W x 16"D x 20"H
LCJ3616L
48"W x 16"D x 20"H
=
LCJ4816L
72"W x 16"D x 20"H
=
LCJ7216L
84"W x 16"D x 20"H
=
LCJ8416L
= LCH7216W
= LCH8416W
drawers & open upper storage
open storage 36"W x 16"D x 20"H
=
= LCH4816W
model
36"W x 16"D x 20"H
=
LCL3616L
48"W x 16"D x 20"H
=
LCL4816L
72"W x 16"D x 20"H
=
LCL7216L
84"W x 16"D x 20"H
=
LCL8416L
= LCG3616L
= LCG4816L
= LCG7216L
= LCG8416L
drawers & adjacent open storage doors 36"W x 16"D x 20"H
L2 V2
2b.2 Specify Finish for Cabinet Face (front) Standard Laminates * Woodgrains Wild Cherry Solar Oak Beigewood Kensington Maple Fusion Maple Patterns White Nebula Grey Nebula Graphite Nebula Cloud Nebula White Tigris Titanium EV Silicon EV Nickel EV Tungsten EV Desert Zephyr Canyon Zephyr Misted Zephyr Loden Zephyr Twilight Zephyr Morro Zephyr Cloud Zephyr Shadow Zephyr Spiced Zephyr Solids Light Beige Antique White Frosty White Black Pepperdust Designer White White Sand Khaki Brown North Sea Slate Grey Dove Grey
= LCH3616W 36"W x 16"D x 20"H
72"W x 16"D x 20"H
= =
2b.1 Specify Finish for Cabinet Wrap (top and
LCI7216L
drawers
48"W x 16"D x 20"H
Two Laminate Patterns Two Veneer Finishes
sides)
doors 36"W x 16"D x 20"H
code
(optional, upcharge applies; specify 2a and one finish each for 2b.1 & 2b.2 )
LCI4816L
= LPL2016C 72"W x 16"D x 20"H
Low Wall Credenzas
Two‐Tone Finish Applications
2a. Specify Two‐Tone Finish Code L1 V1
2b. Specify Finish 20"W x 16"D x 20"H
/
48"W x 16"D x 20"H
= LCK4816L
72"W x 16"D x 20"H
= LCK7216L
= WA 7054.60 = WA 7816.60 = WA 7850.60 = WA 10776.60 = WA 7909.60 = = = = = = = = = = = = = = = = = =
WA 4621.60 WA 4622.60 WA 4623.60 WA 4630.60 WA 4783.60 WA 4810.60 WA 4811.60 WA 4813.60 WA 4814.60 WA 4841.60 WA 4842.60 WA 4843.60 WA 4844.60 WA 4845.60 WA 4846.60 WA 4856.60 WA 4857.60 WA 4859.60
= = = = = = = = = = =
WA 1531.60 WA 1572.60 WA 1573.60 WA 1595.60 WA D327.60 WA D354.60 WA D403.60 WA D50‐60 WA D90.60 WA D91.60 WA D92.60
Standard Laminates * Woodgrains Wild Cherry Solar Oak Beigewood Kensington Maple Fusion Maple Patterns White Nebula Grey Nebula Graphite Nebula Cloud Nebula White Tigris Titanium EV Silicon EV Nickel EV Tungsten EV Desert Zephyr Canyon Zephyr Misted Zephyr Loden Zephyr Twilight Zephyr Morro Zephyr Cloud Zephyr Shadow Zephyr Spiced Zephyr Solids Light Beige Antique White Frosty White Black Pepperdust Designer White White Sand Khaki Brown North Sea Slate Grey Dove Grey
= = = = =
WA 7054.60 WA 7816.60 WA 7850.60 WA 10776.60 WA 7909.60
= = = = = = = = = = = = = = = = = =
WA 4621.60 WA 4622.60 WA 4623.60 WA 4630.60 WA 4783.60 WA 4810.60 WA 4811.60 WA 4813.60 WA 4814.60 WA 4841.60 WA 4842.60 WA 4843.60 WA 4844.60 WA 4845.60 WA 4846.60 WA 4856.60 WA 4857.60 WA 4859.60
= = = = = = = = = = =
WA 1531.60 WA 1572.60 WA 1573.60 WA 1595.60 WA D327.60 WA D354.60 WA D403.60 WA D50‐60 WA D90.60 WA D91.60 WA D92.60
= =
MFM MHM
= = = = = =
CLC CMC CDC CLW CDW CMM
=
STM
= LCH3616L
48"W x 16"D x 20"H
= LCH4816L
72"W x 16"D x 20"H
= LCH7216L
84"W x 16"D x 20"H
= LCH8416L
84"W x 16"D x 20"H
Veneer Finishes on Maple Fusion Maple Honey Maple Finishes on Cherry Light Cherry Medium Cherry Dark Cherry Light Walnut Dark Walnut Medium Mahogany Custom Finish Stain to Match
= LCK8416L
= =
MFM MHM
= = = = = =
CLC CMC CDC CLW CDW CMM
=
STM
Veneer Finishes on Maple Fusion Maple Honey Maple Finishes on Cherry Light Cherry Medium Cherry Dark Cherry Light Walnut Dark Walnut Medium Mahogany Custom Finish Stain to Match
* For laminates not included in our listing of “Standard Laminates”, please contact Nevins Customer Service Department to determine any applicable upcharges. While Nevins is an open laminate line, all laminates not included in our list of standard laminates, regardless of manufacturer or finish, are subject to upcharges.
Example Model Number LCH8416L 84" X 16" x 20" Low Credenza with doors
19 HOW TO SPECIFY
/
L2 (Wrap WA 7850‐60 Beigewood / Face WA 1531‐60 Light Beige) L2 Two‐Tone Laminate Exterior (Cabinet Wrap Laminate is Wilsonart 7850‐60 Beigewood / Cabinet Face Laminate is Wilsonart 1531‐60 Light Beige)
/
Cue Collection How to Specify 3) Specify Interior Finish Coding (Models LPJ / LCH / LCJ only)
code
Standard Interior Finish White Melamine Black Melamine
/
= =
Hardware Options Haden Benina Serrate Touch Latch *
MW MB
Optional Interior Finish Matching Laminate Matching Veneer
= =
4) Specify Hardware (If credenza model LCG, omit step 4)
= = = =
/
code
Custom Finish Options Finished Back (in lieu of melamine) Laminate Back Veneer Back
= =
LBACK VBACK
Wire Management Options Grommets Black ‐ Plastic Grey ‐ Plastic White ‐ Plastic Satin Aluminum ‐ Metal Dividing Panel Wire Chase 3" x 1 ½" Ꝿ
= = = = =
PGB PGG PGW MGA WM9
Cabinet Ventilation Options Ventilation Kit † ¥ Cabinet Cooling Fan † ¥
= =
VK CFK
= =
6 ) Specify Cushion Seat (optional; upcharges apply) (Mobile Pedestals & Low Floor Credenzas only)
code
7a.1) Specify Cushion Model Credenza Size 36"W x 16"D x 20"H 48"W x 16"D x 20"H 72"W x 16"D x 20"H 84"W x 16"D x 20"H Mobile Pedestal Size 20"W x 16"D x 20"H
= = = =
Half Seat CSH18 CSH24 CSH36 CSH42
Full Seat CSF36 CSF48 CSF72 CSF84
=
n/a
CSF20
7a.2) Cushion Placement (half seat cushions only) Left End (as facing) Right End (as facing)
= =
LE RE
= = =
GI COM COL
7b) Specify Fabric Source Graded In CF Stinson Fabric Customer's Own Material Customer's Own Leather
Drawer Options File Hanger Kit Side‐to‐Side Letter (bottom drawer = of credenzas only) Front‐to‐Back Letter (bottom drawe = of pedestals only) Door Options Locks * † Black Silver
/
code
6a) Specify Option Code(s)
H1 H2 H3 TL
* Not available with drawers or optional door locks.
ML1 MV1
5) Specify Options (optional; upcharges apply)
FILE2
7c) Specify Fabric Information
FILE1
1) Fabric Make 2) Fabric Style/Pattern 3) Fabric Color 4) Fabric Number SCLKB SCLKS
† 6b) Specify Placement of Accessory Op on Left End (as facing) Right End (as facing)
= =
LE RE
† Step 6b required. * Locks not available with Touch Latch Hardware. ¥ Not available with Mobile Pedestals or Low Wall Credenzas. Ꝿ Credenza models CLA, CLB and CLC only.
MW MW White Melamine Interior
/
H2 H2 Benina Door Hardware
/
PGW (LE) / PGW (RE) / WM9 PGW White Grommet in the inside back wall of both Left and Right end shells / WM9 Wire Chase Cutout in the dividing partition between left and right end shells.
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
/
CSH42 (LE) / GI (Beatbox 63072 Percussion) CSH42 Half Seat Cushion, LE left end placement / GI Graded In Fabric (CF Stinson Beatbox 63072 Percussion)
CUE COLLECTION 20
Cue Collection Price Guide Revision Summary
Date
Page(s)
Modification
04.14.17
1
Update : GSA Information
04.14.17 04.14.17
2 15
Update : Table of Contents Update : Model Number
04.14.17 06.09.17 06.09.17 09.29.17 09.29.17 07.22.18
21‐22 9, 10, 12‐16, 20 12, 13, 20 133‐134 15‐May 7‐8
Added : Price Guide Revision Summary Update : Model Number Update : Model Number Update : Graded‐In Fabrics Note Added : Grommet Option Update : Graded‐In Fabrics
21 PRICE GUIDE REVISION SUMMARY
Description Contract information removed; Added statement and link to refer to Nevins website. http://nevins.co/Resources/GSA‐State‐Contracts Page reference for Revision Summary added. Model Numbers Corrected. Laminate 48" x 16" x 20"H Model Numbers : LCK3616L/L1 is now LCK4816L/L1, LCK3616L/L2 is now LCK4816L/L2, LCK4816L/L1 is now LCK7216L/L1, LCK4816L/L2 is now LCK7216L/L2. Veneer 48" x 16" x 20"H Model Numbers : LCK3616L/V1 is now LCK4816L/V1, LCK3616L/V2 is now LCK4816L/V2, LCK4816L/V1 is now LCK7216L/V1, LCK4816L/V2 is now LCK7216L/V2.
Section Added Model number revised for optional Locks Black finish. Was SCLK; Now is SCLKB Model number revised for optional Cooling Fan Kit. Was CF; Now is CFK. Fabric Listings updated. Note added to indicate allowed placement for optional grommets. Listing of Graded‐In CF Stinson Fabrics removed; Link to Nevins website added.
Cue Collection Price Guide Revision Summary
Date
Page(s)
Modification
www.nevins.co ∙ 800‐231‐2744 ∙
[email protected]
Description
CUE COLLECTION 22