PRODUCT CATALOGUE

abrasive agents. High gloss in 3 polishing steps. Precise concentricity. Customisable. Low vibration polish. Optimal ratio between speed and contact pressure. Low heat generation ...... Adhesive character of paste ensures maximum surface contact ...... applies to the list of the Robert Koch Institute (RKI). Information on ...
14MB Sizes 691 Downloads 376 Views
PRODUCT CATALOGUE

Proven Products for Better Dentistry

SHOFU Dental GmbH, Am Brüll 17, 40878 Ratingen / Germany Phone: +49 (0) 2102 / 86 64-0, Fax: +49 (0) 2102 / 86 64-64, [email protected], www.shofu.de

Chapters 1

Abrasives, Polishers and Polishing Pastes

2

Filling and Luting

55 - 81

3

Prophylaxis

83 - 86

4

CAD / CAM-Materials

87 - 89

5

Porcelain Systems

91 - 120

6

Light-curing C&B Composite Systems

121 - 132

7

Artificial Teeth

133 - 137

8

Dental Camera

139 - 141

9

Equipment and Accessories

143 - 147

Index

148 - 149

Errors and omissions excepted

5 - 53

General Information

6 - 7

Navigator

8 - 9

Abrasive Stones

10 - 13

Polishers

14 - 31

Polishing Pastes

32 - 34

Prophylaxis Pastes 35 Diamonds

36 - 43

Abrasive Kits

44 - 49

Accessories

50 - 51

Instructions for Use and Safety Precautions

52 - 53

ABRASIVES, POLISHERS AND POLISHING PASTES

1

General Information

1

Rotary Instruments

Whether ceramic abrasives or polishers: SHOFU’s rotary instruments are available in various head sizes and different attachment and shank types – depending on handpiece design, indication and therapy. SHOFU offers a wide range of rotary instruments, not only for dentists, but also for laboratories. The instruments should be used exclusively for their respective indications. It is important to insert them completely into the straight, contra-angle or turbine handpiece, taking care to avoid any jamming. The instruments should also be regularly inspected for any signs of wear.

All shanks are made of stainless steel.

Rotary instruments come in three shank types: HP Shank The smooth HP shank is attached to a straight dental handpiece (HP) by means of a chucking device. The standardised diameter of the HP shank is 2.35 mm. CA Shank The CA shank, 2.35 mm in diameter, fits positively in a contra-angle (CA) handpiece and is manually locked in place with the aid of a groove at the end of the shank. FG Shank The standardised diameter of the smooth FG (friction grip) shank is 1.6 mm; it is used in a highspeed turbine handpiece.

The HP mandrel is suitable for all unmounted wheels and disks (displayed here: SoftCut PB, Greenie and Brownie unmounted wheels). It reliably holds them and is easy to handle. It is advisable to always perform a test run before use and check the instruments for safety and smooth operation.

6

HP

Handpiece

CA Contra-Angle

FG Friction Grip

The optimised design of the mandrels for Super-Snap, SuperSnap Buff and Super-Snap SuperBuff ensures that these flexible disks are securely attached. SHOFU developed a special CA mandrel (with white banded shank) for all OneGloss polishers; in the example image with mounted Midipoint).

1

The most commonly used HP shapes of the Dura-Green ceramic-bonded stones are also available in economical laboratory packs of 72 pieces, in addition to the standard packs of 12 pieces (above: Dura-Green WH6 and IC5).

Recommended Speed Range The recommended speed range for best results varies depending on the shank type and head shape and size. The speed used must not exceed or fall below this range.

Maximum Permissible Speed The maximum permissible speed must not be exceeded! This would result in a substantial loss of materi