PRODUCT INFORMATION

PRODUCT INFORMATION Elettromedia - June 2013 enerGise your sound Update: Subwoofers

All specifications subject to change without notice_13.C

www.hertzaudiovideo.com

Product Information Elettromedia - June 2013

Energy.5 subs: ultra-low frequency range completed NEW

03

Energy.5: evolution of design and technology

04

Technical features

05

Coax 13 sound

System 18 Grille 28 Sub Comp NEW 29 Sub Box NEW 38 About us

43

Press Kit

44

For more information visit www.hertzaudiovideo.com


Comp 06


Energy.5 subs: ultra-low frequency range completed. The Hertz Energy.5 line offers the widest subwoofer range within the Hertz catalogue, boasting nine speaker models; three of them are Flat, and now five sub boxes add to them, for a really complete product offer, to satisfy any needs! Hertz Energy.5 subwoofers owe their great performance to extensive research applied to the previous series structure, resulting in a more dynamic driver with outstanding impact and output never achieved in this category of the market. Thanks to the know-how of the Hertz R&D Team as well as advanced FEA - Finite Element Analysis - simulation design techniques and the world renowned Klippel R&D SYSTEM, every single detail has been optimized. The most important improvement has been obtained by adopting the Hertz V-cone® technology in water-repellent pressed paper membrane. V-cone® technology has had a big impact in the efficiency of the Energy.5 subs series where some models achieved +2dB when compared to the previous series. The employment of the V-cone® also improved cone stiffness and reduced the weight of the moving assembly, allowing a more robust voice coil for a higher peak power handling. Considerable time was spent on the simulation process and the subsequent measurements and listening tests of working prototypes. All this precious development time led to the implementation of a new surround and spider geometry, as well as the selection of the material used. The result is unmatched mechanical and thus acoustical linearity. This, combined with a drastic reduction of the Vas, provide the ability to achieve high undistorted SPL output in even smaller enclosures, an important factor in today’s mobile environment, turning into a thrilling performance when space is not a problem.


All of the above technical refinements, combined with the unparalleled cosmetics of the black V-cone® make Hertz Energy.5 subwoofers the perfect choice for solid, powerful bass in perfect harmony with improved vehicle integration.

3


Energy.5: evolution of design and technology Hertz is proud to introduce the fifth revision of the Energy line; once again increasing its reliability and efficiency which, since the beginning, marked its success! Each new release has been a further evolution; starting from the experience and the know-how acquired with the previous project. With each refinement the Hertz Team introduced innovations, both in terms of technology and design, widening the gap within this competitive market segment. The Energy.5 line refines features that were introduced with the .4 version, becoming even more high-performance as well as more installation-friendly in standard OEM placements. Each Energy.5 component was developed with the purpose of optimizing the overall size: an accurate study of the woofers’ profile led to more compact baskets and motor assemblies, while for the coaxials, making sure the tweeter did not protrude past the height of the woofer’s surround, thus reducing installation problems relating to “flush” factory grille assemblies coming into contact with the tweeter in traditional designs. The research carried out on the limited installation depth in particular vehicles offered the opportunity to introduce into the product catalogue a new component, the EV F165.5, a flat-profile woofer which requires only 51 mm (2 in.) of depth to be installed.

With regards to the design, elements characterising the previous line have been further refined, “mixing” them with those of the most recent Hertz products: the embossed areas of the previous cone are now more visible and emphasized; the dominant colour is black, which best matches the look of the modern car interior components. The Energy.5 line boasts an aggressive design, conveying a contemporary, refined feeling. In order to satisfy the requests coming from the market, the grilles supplied with the component systems, can now also be purchased separately. Three are the available sizes (100 mm, 130 mm and 165 mm). The grille is entirely configurable; it can be mounted without the mesh for those who prefer a “highlighted” installation, or with the mesh for a more subdued presentation. The unique three piece design lends itself to easy refinishing for those who wish to customize every detail. 4


The evolution of the new Energy line also turned into a line with improved frequency response, both in terms of linearity as well as amplitude. The Hertz staff created a new, more rigid cone, optimizing the voice coil and the motor assembly. Also introduced is an innovation in the tweeter design, contributing to the excellent frequency response. A new, powerful 100 mm (4 in.) mid-low range component, the EMV 100.5, has been added to the Energy.5 line, able to reproduce a wide frequency range from 80 Hz to 7,5 kHz!


Technical features


COMP. The Energy woofers have extreme control relating to sound quality, ensured through the use of an over-sized motor along with a membrane which can ensure linear excursion. They provide solid bass and clear, dynamic mid frequencies. The technical solutions adopted in the previous .4 version are merged with refinements; the surface ribbings are now deeper, thus increasing rigidity and, together with the proprietary V-cone®, ensure perfectly symmetrical excursion of the membrane. The DIN size basket, the lower profile gasket as well as the compact size make Energy.5 the ideal component to be installed in any factory system. The natural rubber protection ring plays an important role, preventing the basket and motor assembly from corrosion and cosmetic damage, while at the same time increasing the acoustic damping of the basket and mobile assembly. The woofer range widens with the introduction of the EV F165.5, a component designed for those who don’t want to give up on high performance, even when presented with limited depth. Also the EV 165L.5, a mid-bass specifically designed for low frequency reproduction has been renewed its high-excursion motor assembly and its original non-pressed paper cone provide the ability to get powerful, solid bass from the front doors, even without the support of a subwoofer. The ET 26.5 tweeter is an entirely new project: as the name itself implies; its size is now larger, but the most remarkable evolution concerns its internal geometry as well as its proprietary acoustic loading. The Tetolon dome now features a perfectly hemispheric profile; its wide roll surround actively adds to its emission capability increasing overall SPL, lowers the resonance frequency and perfectly suspends the superlight CCAW wound voice coil. Designed with advanced finite element technologies, the new compression chamber of the ET 26.5 noticeably increases overall sound level, improves off-axis dispersion and extends frequency response while maintaining linearity. A very powerful, high-performance mid-range, the EMV 100.5 has been added to the Energy.5 range. It can reproduce a very wide frequency range; with its compact depth and overall small footprint it can be installed in spaces inaccessible up to now, maintaining a wide, linear response and very high efficiency. Among the Energy components, there are also the two passive crossovers available; the CX 200.5 and CX 300.5, models of reliability and versatility. 5


COAX. For those looking for maximum sound linearity, off-axis response and timber quality, the Energy coaxials are the best available solution in their class. Just like with the woofers, the membrane evolution, the installation friendliness, as well as an accurately tuned motor assembly make these components even more high-performance, all the while occupying a smaller space. The RHFC, Rotary High Frequency Contour, technology introduced in the previous line, has now gone through a further progression: the tweeter position has been angled a further 10°. This refinement, along with rotation, provides the ability to control dispersion as well as getting close to the ideal frequency response.


By orienting the tweeter towards the listening point, you can obtain a frequency response optimised for off-axis listening which, until now, negatively affected the in-car listening experience. The ECX 690, the three-way coaxial, features a dome tweeter as well as a PEI super-tweeter with built-in crossover providing maximum efficiency and extended high frequency response.

6


ET 26.5

ECX 100.5

150 W

ES

120 W

Technical Specifications 1. Tetolon dome, with hemispheric profile and wide roll surround; extremely light

Component - Tweeter weight and properly damped for smooth and extended high frequency response. Diaphragm mm (in.) 26 (1) 2. Acoustic compression chamber; high efficiency and off-axis optimized response. Power handling 3. CCAW (Copper Clad Aluminium Wire) ultra light ferrofluid-cooled mobile voice coil. W peak 150 (Hi-Pass filtered @ 3,5 kHz - 12 dB Oct.) W continuous 4. High energy neodymium magnet. Impedance Ω 4 5. Low carbon content plates for maximum magnetic permeability and high heat Frequency response Hz 2k ÷ 23k dissipation. Sensitivity dB SPL 92 6. Damping material; controlling acoustic resonances insuring clear, high frequency Magnet size D·d·h mm (in.) 19 x 3 (0.75 x 0.12) Voice coil Ø mm (in.) 20 (0.8) tones. Magnet - Neodymium 7. Mounting accessories for external or embedded mounting included. Dome - Tetolon Weight of one kg (lb.) 0,03 (0.07) component 110

EMV 100.5

ECX 130.5

120 W

150 W

ET 26.5

mm 20 Ω 3,7 Hz 1350 mH 0,02 l g 0,19 mm/N 0,07 T·m 1,5 - 0,9 - 2,7 - 1,5 dB 92

EV 165.5

100

210 W

95

12

10

90 8

85

6

80 75

ES

4

70 2

65

210 W

14

Impedance (Ohm)

150 W

SPL (dB) @ 2.83V,1m, half space

EV 130

Electro-Acoustic Parameters .5 D Re Fs Le Vas Mms Cms BL Qts Qes Qms Spl

ECX 165.5

105

ES

60 100

ECX 570.5 1000

Frequency (Hz)

210 W

0

10000

ES

on axis

45° off axis impedance

44 mm

1.7 in.

B

38,5 mm

1.5 in.

EV 165L.5 C

20 mm

0.78 in.

D

8,5 mm

0.33 in.

K

28,3 mm

1.11 in.

J

44,3 mm

1.75 in.

R

48 mm

1.89 in.

S

10 mm

0.4 in.

T

10 mm

0.4 in.

EMV 100.5

210 W

C

110

D

ECX 690.5

K

EV F165.5


A

100 95

30

S

105

B

300 W

J

R

T

20

90 85

ES

25

60°

15

Impedance (Ohm)

A

Elettromedia - 62018 180 W Potenza80Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 75 70

10

5


MOUNTING ACCESSORIES

7


ET 26.5

ECX 100.5

150 W

ES

120 W

ET 26.5


105

Technical Specifications Component - Midwoofer Size mm (in.) 100 (4) Power handling W peak 120 W continuous 40 Impedance Ω 4 Frequency response Hz 80 ÷ 7,5k Sensitivity dB SPL 91 Magnet size D·d·h mm (in.) 70 x 32 x 10 (2.7 x 1.26 x 0.4) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite Cone - Water repellent pressed paper Weight of one component kg (lb.) 0,45 (0.99)

150 W

EV 165.5

mm 88 mm 1,5 Ω 3 Hz 104 mH 0,15 l 2,3 g 5,3 mm/N 0,44 T·m 3,5 - 0,68 - 0,87 - 3,1 dB 91

12

100 95

10

90 8

85

6

80

ECX 165.5

EMV 100.5 ECX 570.5

210 W

210 W

110

210 W

ES

30

25

100 95

20

90 85 80 75

15

ECX 690.5

300 W

70

10

5

ES

65 0

60 100

EV F165.5

D

C

A

103 mm

4 in.

A3

130 mm

5.12 in.

B

93 mm

3.66 in.

C

49 mm

1.93 in.

D

44 mm

1.73 in.

180 W

ES

105


EV 165L.5

ES

14

1. V-cone® for best off-axis response and clear mid-high frequency detail. 75 4 2. Water-repellent treated paper cone; butyl rubber surround. 70 3. Pure copper voice coil, wound on aluminium former, for exceptional thermal 210 W 2 65 and mechanical capacity. 4. Large motor assembly for excellent control of voice coil. 60 0 100 plates for maximum 1000 10000 5. Low carbon content magnetic permeability and high Frequency (Hz) heat dissipation. on axis 45° off axis 6. Rubber magnet cover provides damping to the basket and motor structure impedance and protects from abrasions and damages. 7. DIN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance.

Electro-Acoustic Parameters D Xmax Re Fs Le Vas Mms Cms BL Qts Qes Qms Spl

150 W

1000

Frequency (Hz)

10000

on axis


EV 130.5

B A A3

110

30

100 95

25

20

90

Impedance (Ohm)

L (dB) @ 2.83V,1m, half space

105

Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 85

15

8

80 75

10


EV 130.5

ECX 130.5

Impedance (Ohm)

110

120 W

Impedance (Ohm)

EMV 100.5

110

150 W

120 W


EMV 100.5

ECX 100.5

105

120 W

ES

14

12

100 95

10

90 8

85

6

80


75

ECX 130.5

70 65

Impedance (Ohm)

ET 26.5

4

150 W

60

ES

2

0 100

1000

Frequency (Hz)

10000

on axis


EV 130.5

ECX 165.5 EMV 100.5

150 W

210 W

110 105

Electro-Acoustic Parameters

210 W

EV F165.5 D

C

20

®

ECX 570.5

EV 130.5 ECX 690.5

300 W

110

30

ES

105

180 W A

130 mm

5.12 in.

A3

150 mm

5.9 in.

B

119 mm

4.68 in.

C

57 mm

2.24 in.

D

50 mm

1.96 in.

ES

25

100 95

20

90 85

15

80 10

75 70

Impedance (Ohm)

EV 165L.5

mm 110 mm 3 Ω 3,1 Hz 82 mH 0,18 l 6,05 g 7,9 mm/N 0,47 T·m 4 - 0,68 - 0,8 - 4,6 dB 93

90

5

65 60

B A

100

1000

Frequency (Hz)

A3

10000

0

on axis 45° off axis impedance

EV 165.5 110

30

@ 2.83V,1m, half space

105 100

25

95 90 85 80

pedance (Ohm)

20 Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it

9

15


210 W

95

1. V-cone for best off-axis response and clear mid-high frequency detail. 85 15 2. Water-repellent treated paper cone; butyl rubber surround. 3. Pure copper voice coil, wound on aluminium former, for210 exceptional 80 W 10 thermal and mechanical capacity. 75 4. Large motor assembly for excellent control of voice coil. 70 5. Low carbon content plates for maximum magnetic permeability and 5 65 high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor 0 60 100 1000damages. 10000 structure and protects from abrasions and Frequency (Hz) 7. DIN size basket coated with scratch-proof, corrosive-resistant material. on axis 45° off axis 8. Tin-plated, high current terminals. impedance 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance.


EV 165.5

25

100

Impedance (Ohm)

Component - Woofer Size mm (in.) 130 (5) Power handling W peak 150 W continuous 50 Impedance Ω 4 Frequency response Hz 70 ÷ 6k Sensitivity dB SPL 93 Magnet size D·d·h mm (in.) 80 x 32 x 13 (3.15 x 1.26 x 0.5) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite Cone - Water repellent pressed paper Weight of one component kg (lb.) 0,7 (1.54)


Technical Specifications

D Xmax Re Fs Le Vas Mms Cms BL Qts Qes Qms Spl

ES

30

EMV 100.5

120 W

ECX 130.5

110

150 W

ES

30

150 W

25

100 95

20

90 85

15


80

ECX 165.5

75 70

210 W

10

Impedance (Ohm)

EV 130.5


105

5

ES

65 0

60 100

1000

Frequency (Hz)

10000

on axis


EV 165.5

EV 130.5

210 W

ECX 570.5

110

210 W

ES

30

Technical Specifications Component - Woofer Size mm (in.) 165 (6.5) Power handling W peak 210 W continuous 70 Impedance Ω 4 Frequency response Hz 60 ÷ 5k Sensitivity dB SPL 93,5 Magnet size D·d·h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.6) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite Cone - Water repellent pressed paper Weight of one component kg (lb.) 0,96 (2.12)

210 W

EV F165.5

20

90 85

15

1. V-cone® for best off-axis response and clear mid-high frequency detail. 2. 80 Water-repellent treated paper cone; butyl rubber surround. 3. 75 Pure copper voice coil, wound on aluminium former, for exceptional 10 thermal and mechanical capacity. 70 4. Large motor assembly for excellent control of voice coil. 300 W 5 65 5. Low carbon content plates for maximum magnetic permeability and 0 60 high heat dissipation. 100 1000 10000 6. Rubber magnet cover provides damping to the basket and motor Frequency (Hz) on axis structure and protects from abrasions and damages. 45° off axis 7. DIN size basket coated with scratch-proof, corrosive-resistant material. impedance 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance.

Electro-Acoustic Parameters mm 134 mm 3 Ω 3,1 Hz 70 mH 0,18 l 10,4 g 13,7 mm/N 0,37 T·m 5 - 0,61 - 0,76 - 3,2 dB 93,5

180 W

ECX 690.5

ES

EV 165.5

110

30

105



95

25

100 95

20

90 85

15

80 10

75 70

Impedance (Ohm)

EV 165L.5

25

100

Impedance (Ohm)


105

5

65 0

60

D

C

1000

Frequency (Hz)

A

165 mm

6.5 in.

B

142 mm

5.6 in.

C

70 mm

2.83 in.

D

64 mm

2.56 in.

10000

on axis


EV 165L.5

B A

110

30

100 95

25

20

90

Impedance (Ohm)

(dB) @ 2.83V,1m, half space

105


15

80 75

10

10


100

EV 130.5

150 W

110

ECX 165.5

210 W

30

210 W

95

20

90 85

15


80 75 70

ES

25

100

ECX 570.5

10

210 W

Impedance (Ohm)

EV 165.5


105

5

ES

65 60

100

1000

Frequency (Hz)

EV 165L.5

EV 165.5

210 W

110

ECX 690.5

10000

0


300 W

30

105

Component - Woofer Size mm (in.) 165 (6.5) Power handling W peak 210 W continuous 70 Impedance Ω 4 Frequency response Hz 50 ÷ 4k Sensitivity dB SPL 92 Magnet size D·d·h mm (in.) 85 x 32 x 17 (3.35 x 1.26 x 0.7) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite Cone - Water repellent non-pressed paper Weight of one component kg (lb.) 0,98 (2.16)

20

90

1. V-cone® for best off-axis response and clear mid-high frequency detail. 85 15 2. Water-repellent non-pressed paper cone provides deep, tight and dynamic 80 bass output. 10 3. 75Pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity. 70 5 4. Large motor assembly for excellent mobile voice coil control. 5. 65Low carbon content plates for maximum magnetic permeability and high 0 60heat dissipation. 100 1000 10000 6. Rubber magnet cover provides damping to the basket and motor Frequency (Hz) on axis structure and protects from abrasions and damages. 45° off axis 7. DIN size basket coated with scratch-proof, corrosive-resistant material. impedance 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance.

180 W

Electro-Acoustic Parameters mm 134 mm 4 Ω 3,3 Hz 65 mH 0,21 l 11 g 14,8 mm/N 0,38 T·m 4,8 - 0,72 - 0,88 - 3,8 dB 92

EV 165L.5

110

30

105



95

25

100 95

20

90 85

15

80 10

75 70

Impedance (Ohm)

EV F165.5

ES

25

100

Impedance (Ohm)



5

65

100

D

C

1000

Frequency (Hz)

A

165 mm

6.5 in.

B

142 mm

5.6 in.

C

72 mm

2.83 in.

D

65 mm

2.56 in.

10000


B A

EV F165.5 110

30

105 100 95 90

11 20

(Ohm)

m, half space



0

60

95

85

15

80 10

75 70

0 100

1000

Frequency (Hz)

ECX 690.5

10000

on axis

45° W off axis 300 impedance

ULTRA flat

EV 165L.5 110

30

Component - Woofer Size mm (in.) 165 (6.5) Power handling W peak 180 W continuous 60 Impedance Ω 4 Frequency response Hz 65 ÷ 4k Sensitivity dB SPL 93,5 Magnet size D·d·h mm (in.) 90 x 32 x 10 (3.55 x 1.26 x 0.4) Voice coil Ø mm (in.) 25 (1) Magnet - High density flux ferrite Cone - Water repellent pressed paper Weight of one component kg (lb.) 0,71 (1.57)

95

20

90 85

15

80 10

75

1. 70 Shallow profile for an easy replacement of factory speakers. 5 2. V-cone® for best off-axis response and clear mid-high frequency detail. 65 3. Water-repellent treated paper cone, butyl rubber surround. 4. 60 Pure copper voice coil, wound on aluminium former, for very good 0 100 1000 10000 thermal and mechanical capacity. Frequency (Hz) on axis 5. Large motor assembly for excellent mobile voice coil control. 45° off axis 6. Low carbon content plates for maximum magnetic permeability and impedance high heat dissipation. 7. DIN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance.

Electro-Acoustic Parameters mm 134 mm 3 Ω 2,7 Hz 80 mH 0,14 l 9,4 g 12 mm/N 0,33 T·m 3,9 - 0,8 - 1 - 3,4 dB 93,5

25

100

Impedance (Ohm)


EV F165.5

110

30

105 25

100 95

20

90 85

15

80 10

75 70

Impedance (Ohm)



ES

105

180 W


EV F165.5

ES

5 www.hertzaudiovideo.com

60

210 W

20

90

65

EV 165L.5

210 W

Impedance (Ohm)

ECX 570.5

100

210 W

SPL (dB) @ 2.83V,1m, half spa

EV 165.5

5

65 0

60

D C

A

165,5 mm

6.51 in.

B

139 mm

5.47 in.

C

51 mm

2 in.

D

43 mm

1.7 in.

1000

Frequency (Hz)

10000


B A



100


ECX 100.5

ESK 130.5

120 W

225 W

Technical Specifications Component - Two way coaxial Woofer size mm (in.) 100 (4) Tweeter diaphragm mm (in.) 24 (0.9) Power handling W peak 120 W continuous 40 Impedance Ω 4 Frequency response Hz 80 ÷ 23k Sensitivity dB SPL 92 Magnet size D·d·h mm (in.) 70 x 32 x 10 (2.7 x 1.26 x 0.4) Woofer Voice coil Ø mm (in.) 25 (1) Tweeter Voice coil Ø mm (in.) 15 (0.6) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Weight of one component kg (lb.) 0,47 (1.04)

ECX 130.5

150 W

ECX 165.5

210 W


ESK 165L.5 300 W

mm 88 mm 2 Ω 3 Hz 102 mH l 2,5 g 4,8 mm/N 0,52 T·m 3,5 - 0,61 - 0,76 - 3,1 dB 92

ECX 690.5 B A

110

30

105

210 W

A

103 mm

4 in.

A3

130 mm

5.12 in.

B

93 mm

3.66 in.

C

58 mm

2.28 in.

D

44 mm

1.73 in.

25

100 95 90 85

20

ESK F165.5 270 W

15

80 10

75 70

5

65 60

100

1000

Frequency (Hz)

300 W

10000

0

on axis


A3

ESK 163L.5 375 W ECX 130.5 Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 110 30 13

pace

105 100

25


D C

ECX 100.5

Impedance (Ohm)

ECX 570.5

ESK 165.5



1. Water-repellent treated paper cone, butyl rubber surround. 2. Pure copper voice coil wound on aluminium former, for very good thermal and mechanical capacity. 3. Large motor assembly for excellent mobile voice coil control. 300 W 4. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 5. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 6. DIN size basket coated with scratch-proof, corrosive-resistant material. 7. Tin-plated, high current terminals. 8. Silver-plated lead wires, for maximum reliability and conductivity. 9. Epoxy glue for basket and motor system provides perfect coupling. 10. Curve memory Nomex spider for consistent, reliable performance. 11. High energy neodymium magnet tweeter. 12. RHFC, Rotary High Frequency Contour; adjustable for perfect off-axis dispersion and frequency response, according to the listening position.


ECX 100.5

120 W

ECX 130.5

150 W

ESK 130.5

225 W

ECX 100.5 ESK 165.5

300 W

110

30

Component - Two way coaxial Woofer size mm (in.) 130 (5) Tweeter diaphragm mm (in.) 24 (0.9) Power handling W peak 150 W continuous 50 Impedance Ω 4 Frequency response Hz 70 ÷ 23k Sensitivity dB SPL 93 Woofer Magnet size D·d·h mm (in.) 80 x 32 x 13 (3.15 x 1.26 x 0.5) Woofer Voice coil Ø mm (in.) 25 (1) Tweeter Voice coil Ø mm (in.) 15 (0.6) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Weight of one component kg (lb.) 0,73 (1.61)

210 W

mm 110 mm 3 Ω 3,1 Hz 82 mH l 6,3 g 7,6 mm/N 0,49 T·m 4 - 0,62 - 0,75 - 3,8 dB 93

ECX 690.5 D C

ESK 165L.5

ESK F165.5 270 W

ECX 130.5 110

30

105

300 W A

130 mm

5.12 in.

A3

150 mm

5.9 in.

B

119 mm

4.68 in.

C

69 mm

2.72 in.

D

50 mm

1.96 in.

25

100 95

20

90 85 80 75 70

15

ESK 163L.5 375 W

10

5

65 0

60 100

1000

Frequency (Hz)

B

10000

on axis


A

A3

ECX 165.5


30

105 25

14



210 W

20

90

Impedance (Ohm)

ECX 570

.5 Electro-Acoustic Parameters

95

1. 85Water-repellent treated paper cone, butyl rubber surround. 15 2. Pure copper voice coil wound on aluminium former, for very good thermal 80 and mechanical capacity. 10 3. 75Large motor assembly for excellent mobile voice coil control. 4. 70Low carbon content plates for maximum magnetic permeability and high 5 heat dissipation. 300 W 65 5. Rubber magnet cover provides damping to the basket and motor structure 0 60and protects from abrasions and damages. 100 1000 10000 6. DIN size basket coated with scratch-proof, corrosive-resistant material. Frequency (Hz) on axis 7. Tin-plated, high current terminals. 45° off axis 8. Silver-plated lead wires, for maximum reliability and conductivity. impedance 9. Epoxy glue for basket and motor system provides perfect coupling. 10. Curve memory Nomex spider for consistent, reliable performance. 11. High energy neodymium magnet tweeter. 12. RHFC, Rotary High Frequency Contour; adjustable for perfect off-axis dispersion and frequency response, according to the listening position.


ECX 165.5

25

100

Impedance (Ohm)



105

120 W

95

ESK 130.5

15

80 10

75 70

60

150 W

5 www.hertzaudiovideo.com

ESK 165.5

300 W

0

on axis


ECX 130.5

Component - Two way coaxial Woofer size mm (in.) 165 (6.5) Tweeter diaphragm mm (in.) 24 (0.9) Power handling W peak 210 W continuous 70 Impedance Ω 4 Frequency response Hz 60 ÷ 23k Sensitivity dB SPL 94 Woofer Magnet size D·d·h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.6) Woofer Voice coil Ø mm (in.) 25 (1) Tweeter Voice coil Ø mm (in.) 15 (0.6) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Weight of one component kg (lb.) 1 (2.2)

100 95

30

ESK 165L.5 300 W

25

20

90 85

15

80

Impedance (Ohm)



1. Water-repellent treated paper cone, butyl rubber surround. 10 75 2. Pure copper voice coil wound on aluminium former, for very good thermal 70and mechanical capacity. 5 3. 65Large motor assembly for excellent mobile voice coil control. 4. Low carbon content plates for maximum magnetic permeability and high 0 270 W 60heat dissipation. 100 1000 10000 5. Rubber magnet cover provides damping Frequency (Hz)to the basket and motor structure on axis and protects from abrasions and damages. 45° off axis 6. DIN size basket coated with scratch-proof, corrosive-resistant material. impedance 7. Tin-plated, high current terminals. 8. Silver-plated lead wires, for maximum reliability and conductivity. 9. Epoxy glue for basket and motor system provides perfect coupling. 10. Curve memory Nomex spider for consistent, reliable performance. 11. High energy neodymium magnet tweeter. 12. RHFC, Rotary High Frequency Contour; adjustable for perfect off-axis dispersion and frequency response, according to the listening position.

210 W

ESK F165.5


300 W

mm 134 mm 3 Ω 3,1 Hz 72 mH l 12 g 12,7 mm/N 0,4 T·m 4,9 - 0,58 - 0,72 - 3,1 dB 94

ECX 165.5

110

ESK 163L.5 375 W

30


105 25

100 95

20

90 85

15

80 10

75 70

5

65

D

C

0

60 100

A

165 mm

6.5 in.

B

142 mm

5.6 in.

B

C

76 mm

3 in.

A

D

65 mm

2.56 in.

1000

Frequency (Hz)

10000

on axis


ECX 570.5 110

30

100 95 90

25

20

15 hm)

, half space

105 Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it


ECX 690.5

10000

110 105


1000

Frequency (Hz)

210 W

ECX 570.5

100

Impedance (Ohm)

ECX 165.5

20

85

65

ECX 130.5

225 W

90

Impedance (Ohm)

SPL (dB) @ 2.83V,1m, half spac

ECX 100.5

100

ESK 165.5

95 90 85

15

80 10

75 70

5


65

0

60

210 W

100

1000

Frequency (Hz)

ESK 165L.5 300 W

ESK F165.5 270 W

110


Technical Specifications Component - Two way coaxial Woofer size mm (in.) (5 x 7) Tweeter diaphragm mm (in.) 24 (0.9) Power handling W peak 210 W continuous 70 Impedance Ω 4 Frequency response Hz 60 ÷ 23k Sensitivity dB SPL 94 Woofer Magnet size D·d·h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.6) Woofer Voice coil Ø mm (in.) 25 (1) Tweeter Voice coil Ø mm (in.) 15 (0.6) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Weight of one component kg (lb.) 1 (2.2)

30

25

100 95

20

90 85

15

1. 80 Water-repellent treated paper cone, butyl rubber surround. 2. Pure copper voice coil wound on aluminium former, for very good thermal 10 75 and mechanical capacity. 3. 70 Large motor assembly for excellent mobile voice coil control. 5 4. Low carbon content plates for maximum magnetic permeability and high heat 65 dissipation. 0 5. 60 Rubber magnet 100 cover provides damping to the basket and motor structure 1000 10000 and protects from abrasions Frequency and damages. 375 W (Hz) on axis 6. DIN size basket coated with scratch-proof, corrosive-resistant material. 45° off axis 7. Tin-plated, high current terminals. impedance 8. Silver-plated lead wires, for maximum reliability and conductivity. 9. Epoxy glue for basket and motor system provides perfect coupling. 10. Curve memory Nomex spider for consistent, reliable performance. 11. High energy neodymium magnet tweeter. 12. RHFC, Rotary High Frequency Contour; adjustable for perfect off-axis dispersion and frequency response, according to the listening position.

300 W

ESK 163L.5


ECX 570.5

mm 139 mm 3 Ω 3,1 Hz 76,5 mH l 10,5 g 13,5 mm/N 0,32 T·m 4,9 - 0,67 - 0,84 - 3,2 dB 94

110

30

105




ECX 165.5

210 W

105

ECX 690.5

on axis

Impedance (Ohm)

ECX 570.5

10000

25

100 95

20

90 85

15

80 10

75 70

Impedance (Ohm)

ECX 165.5

20

300 W

Impedance (Ohm)

150 W

SPL (dB) @ 2.83V,1m, half s

ECX 130.5

5

0

60 100

1000

Frequency (Hz)

10000

on axis


D

B1

B2

A1

A2

C

A1

221 mm

8.7 in.

A2

139 mm

5.5 in.

B1

182 mm

7.16 in.

B2

126 mm

4.96 in.

ECX 690.5 110

C

76 mm

3 in.

D

65 mm

2.56 in.

30

105 25

95 90

20

16

ce (Ohm)

V,1m, half space



65

ESK 165L.5 300 W

85 80

15

10

75 70

Impedance (O

SPL (dB) @ 2.83V,1m,

90

5

65

ECX 570.5

0

60

www.hertzaudiovideo.com 10000

100

210 W

1000

Frequency (Hz)

ESK F165.5 270 W

on axis


ECX 570.5 110 105

Technical Specifications Component - Three way coaxial Woofer size mm (in.) (6 x 9) Tweeter diaphragm mm (in.) 40 (1.58) Supertweeter diaphragm mm (in.) 15 (0.6) Power handling W peak 300 W continuous 100 Impedance Ω 4 Frequency response Hz 40 ÷ 23k Sensitivity dB SPL 95 Woofer Magnet size D·d·h mm (in.) 100 x 45 x 17 (4 x 1.8 x 0.7) Woofer Voice coil Ø mm (in.) 25 (1.0) Tweeter Voice coil Ø mm (in.) 20 (0.78) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water-repellent pressed paper Tweeter dome - PEI Supertweeter dome - PEI Weight of one component kg (lb.) 1,55 (3.42)

25

100 95

20

ESK 163L.5 375 W

90 85

15

1. 80 Water-repellent treated paper cone, butyl rubber surround. 10 2. 75 Pure copper voice coil wound on aluminium former, for very good thermal and mechanical capacity. 3. 70 Large motor assembly for excellent mobile voice coil control. 5 4. 65 Low carbon content plates for maximum magnetic permeability and high heat dissipation. 0 60 5. Rubber magnet cover provides damping 100 1000to the basket and motor 10000 structure Frequency (Hz) and protects from abrasions and damages. on axis 6. DIN size basket coated with scratch-proof, corrosive-resistant material. 45° off axis 7. Tin-plated, high current terminals. impedance 8. Silver-plated lead wires, for maximum reliability and conductivity. 9. Epoxy glue for basket and motor system provides perfect coupling. 10. Curve memory Nomex spider for consistent, reliable performance. 11. Dome-cone tweeter with high energy neodymium magnet combined with a PEI supertweeter. The best possible efficiency and high frequency extension.

ECX 690.5

- Grille included 110

30

105

mm 171 mm 3,5 Ω 3,3 Hz 59 mH l 29 g 18,8 mm/N 0,38 T·m 5 - 0,73 - 0,91 - 3,7 dB 95

25

100 95

20

90 85

15

80 10

75 70

Impedance (Ohm)



5

65 0

60 100

1000

Frequency (Hz)

A1

238 mm

9.35 in.

E1

263 mm

10.35 in.

A2

162 mm

6.35 in.

E2

190 mm

7.5 in.

B1

224 mm

8.8 in.

F

26 mm

1 in.

B2

151 mm

5.95 in.

C

96 mm

3.8 in.

D

79 mm

3.1 in.

10000

on axis


E2

D

B1

B2

A1

A2

C

E1

F




Impedance (Ohm)

300 W


ECX 690.5

30


ESK 130.5

225 W

Technical Specifications Component - Two way system Woofer size mm (in.) 130 (5) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 225 W continuous 75 Impedance Ω 4 Frequency response Hz 70 ÷ 23k Sensitivity dB SPL 93 Woofer magnet size D·d·h mm (in.) 80 x 32 x 13 (3.15 x 1.26 x 0.5) Tweeter magnet size D·d·h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water repellent pressed paper Tweeter dome - Tetolon Crossover type - LP/HP @ 3 kHz - 6/12 dB Oct. Component adjustment dB +2; 0; -2 Woofer weight of one component kg (lb.) 0,7 (1.54) Tweeter weight of one component kg (lb.) 0,03 (0.07) Crossover weight of one component kg (lb.) 0,17 (0.37)

ESK 165.5

300 W

ESK 165L.5 300 W

ET 26.5 1. Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. 2. Acoustic compression chamber; high efficiency and off-axis optimized response. 3. CCAW (Copper Clad Aluminium Wire) ultra light ferrofluid-cooled mobile voice coil. 4. High energy neodymium magnet. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Damping material; controlling acoustic resonances insuring clear, high frequenc tones.

EV 130.5 1. V-cone® for best off-axis response and clear mid-high frequency detail. 2. Water-repellent treated paper cone; butyl rubber surround. Tweeter Woofer 3. Pure copper voice coil, wound on aluminium former, for exceptional thermal D mm 20 110 Xmax mm - 3 and mechanical capacity. Re Ω 3,7 3,1 4. Large motor assembly for excellent control of voice coil. Fs Hz 1350 82 5. Low carbon content plates for maximum magnetic permeability and high Le mH 0,02 0,18 heat dissipation. Vas l - 6,05 Mms g 0,19 7,9 6. Rubber magnet cover provides damping to the basket and motor structure Cms mm/N 0,07 0,47 and protects from abrasions and damages. BL T·m 1,5 4 7. DIN size basket coated with scratch-proof, corrosive-resistant material. Qts - 0,9 0,68 Qes - 2,7 0,8 8. Tin-plated, high current terminals. Qms - 1,5 4,6 9. Silver-plated lead wires, for maximum reliability and conductivity. Spl dB 92 93 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance.

ESK F165.5 270 W

- Tweeter mounting accessories and woofer grille included

ESK 163L.5 375 W





ESK 130.5

225 W

ESK 165.5

300 W

A

130 mm

5.12 in.

A3

150 mm

5.9 in.

B

119 mm

4.68 in.

C

57 mm

2.24 in.

D

50 mm

1.96 in.

D

C

E

B

E

164 mm

6.45 in.

F

24 mm

0.94 in.

F

A A3

G

102,5 mm

4.03 in.

H

82 mm

3.23 in.

I

34 mm

1.34 in.

ESK 165L.5 300 W

G

I H

44 mm

1.7 in.

B

38,5 mm

1.5 in.

C

20 mm

0.78 in.

D

8,5 mm

0.33 in.

ESK F165.5 270 W B A

ESK 163L.5 375 W

D

28,3 mm

J

44,3 mm

1.75 in.

R

48 mm

1.89 in.

S

10 mm

0.4 in.

T

10 mm

0.4 in.

1.11 in.

C S K

J

R

T All specifications subject to change without notice_13.C

A

K

19

ESK 130.5

225 W

ESK 165.5

300 W



ESK 165L.5 300 W

ESK F165.5 270 W


ET 26.5 1. Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. 2. Acoustic compression chamber; high efficiency and off-axis optimized response. 3. CCAW (Copper Clad Aluminium Wire) ultra light ferrofluid-cooled mobile voice coil. 4. High energy neodymium magnet. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Damping material; controlling acoustic resonances insuring clear, high frequenc tones. EV 165.5 V-cone® for best off-axis response and clear mid-high frequency detail. Water-repellent treated paper cone; butyl rubber surround. Pure copper voice coil, wound on aluminium former, for exceptional thermal and mechanical capacity. Large motor assembly for excellent control of voice coil. Low carbon content plates for maximum magnetic permeability and high heat dissipation. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. DIN size basket coated with scratch-proof, corrosive-resistant material. Tin-plated, high current terminals. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance.

Tweeter Woofer 1. 2. D mm 20 134 Xmax mm - 3 3. Re Ω 3,7 3,1 Fs Hz 1350 70 4. Le mH 0,02 0,18 5. Vas l - 10,4 Mms g 0,19 13,7 Cms mm/N 0,07 0,37 6. BL T·m 1,5 5 Qts - 0,9 0,61 7. Qes - 2,7 0,76 Qms - 1,5 3,2 8. Spl dB 92 93,5 9.

ESK 163L.5 375 W




Component - Two way system Woofer size mm (in.) 165 (6.5) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 300 W continuous 100 Impedance Ω 4 Frequency response Hz 60 ÷ 23k Sensitivity dB SPL 93,5 Woofer magnet size D·d·h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.5) Tweeter magnet size D·d·h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water repellent pressed paper Tweeter dome - Tetolon Crossover type - LP/HP @ 3 kHz - 6/12 dB Oct. Component adjustment dB +2; 0; -2 Woofer weight of one component kg (lb.) 0,96 (2.12) Tweeter weight of one component kg (lb.) 0,03 (0.07) Crossover weight of one component kg (lb.) 0,17 (0.37)

ESK 130.5

225 W

ESK 165.5

300 W


D

C

ESK 165L.5 300 W

A

165 mm

6.5 in.

B

142 mm

5.6 in.

C

70 mm

2.83 in.

D

64 mm

2.56 in.

B A

E

E

184 mm

7.25 in.

F

25 mm

0.98 in.

F G

102,5 mm

4.03 in.

H

82 mm

3.23 in.

I

34 mm

1.34 in.

ESK F165.5 270 W

G

I

H

A

44 mm

1.7 in.

B

38,5 mm

1.5 in.

C

20 mm

0.78 in.

D

8,5 mm

0.33 in.

D

K

28,3 mm

1.11 in.

J

44,3 mm

1.75 in.

R

48 mm

1.89 in.

S

10 mm

0.4 in.

T

10 mm

0.4 in.

C

B A

S K

J

R

T


ESK 163L.5 375 W

21

ESK 165.5

300 W


ESK 165L.5 300 W Technical Specifications Component - Two way system Woofer size mm (in.) 165 (6.5) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 300 W continuous 100 Impedance Ω 4 Frequency response Hz 50 ÷ 23k Sensitivity dB SPL 92 Woofer magnet size D·d·h mm (in.) 85 x 32 x 17 (3.35 x 1.26 x 0.7) Tweeter magnet size D·d·h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water repellent non-pressed paper Tweeter dome - Tetolon Crossover type - LP/HP @ 3 kHz - 6/12 dB Oct. Component adjustment dB +2; 0; -2 Woofer weight of one component kg (lb.) 0,98 (2.16) Tweeter weight of one component kg (lb.) 0,03 (0.07) Crossover weight of one component kg (lb.) 0,17 (0.37)

ESK F165.5 270 W


EV 165L.5 V-cone® for best off-axis response and clear mid-high frequency detail. Water-repellent non-pressed paper cone provides deep, tight and dynamic bass output. Pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity. Large motor assembly for excellent mobile voice coil control. Low carbon content plates for maximum magnetic permeability and high heat dissipation. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. DIN size basket coated with scratch-proof, corrosive-resistant material. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance.

Tweeter Woofer 1. 2. D mm 20 134 Xmax mm - 3 Re Ω 3,7 3,3 3. Fs Hz 1350 67 Le mH 0,02 0,21 4. Vas l - 11 Mms g 0,19 14,8 5. Cms mm/N 0,07 0,38 BL T·m 1,5 4,8 6. Qts - 0,9 0,72 Qes - 2,7 0,88 Qms - 1,5 3,8 7. Spl dB 92 92 8.




ESK 163L.5 375 W


ESK 165.5

300 W


ESK 165L.5 300 W

ESK F165.5 270 W A

165 mm

6.5 in.

B

142 mm

5.6 in.

C

72 mm

2.83 in.

D

65 mm

2.56 in.

D

C

B A

E

E

184 mm

7.25 in.

F

25 mm

0.98 in.

F G

102,5 mm

4.03 in.

H

82 mm

3.23 in.

I

34 mm

1.34 in. G

ESK 163L.5 375 W I

H

44 mm

1.7 in.

B

38,5 mm

1.5 in.

C

20 mm

0.78 in.

D

8,5 mm

0.33 in.

D B A

28,3 mm

1.11 in.

J

44,3 mm

1.75 in.

R

48 mm

1.89 in.

S

10 mm

0.4 in.

T

10 mm

0.4 in.

C S K

J

R

T


A

K

23


ESK 165L.5 300 W

ULTRA flat

ESK F165.5 270 W Technical Specifications Component - Two way system Woofer size mm (in.) 165 (6.5) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 270 W continuous 90 Impedance Ω 4 Frequency response Hz 65 ÷ 23k Sensitivity dB SPL 93,5 Woofer magnet size D·d·h mm (in.) 90 x 32 x 10 (3.55 x 1.26 x 0.4) Tweeter magnet size D·d·h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone Water repellent pressed paper Tweeter dome - Tetolon Crossover type - LP/HP @ 3 kHz - 6/12 dB Oct. Component adjustment dB +2; 0; -2 Woofer weight of one component kg (lb.) 0,71 (1.57) Tweeter weight of one component kg (lb.) 0,03 (0.07) Crossover weight of one component kg (lb.) 0,17 (0.37)

ESK 163L.5 375 W


EV F165.5 1. Shallow profile for an easy replacement of factory speakers. Tweeter Woofer 2. V-cone® for best off-axis response and clear mid-high frequency detail. D mm 20 134 3. Water-repellent treated paper cone, butyl rubber surround. Xmax mm - 3 4. Pure copper voice coil, wound on aluminium former, for very good thermal Re Ω 3,7 2,7 Fs Hz 1350 80 and mechanical capacity. Le mH 0,02 0,14 5. Large motor assembly for excellent mobile voice coil control. Vas l - 9,4 6. Low carbon content plates for maximum magnetic permeability and Mms g 0,19 12 high heat dissipation. Cms mm/N 0,07 0,33 BL T·m 1,5 3,9 7. DIN size basket coated with scratch-proof, corrosive-resistant material. Qts - 0,9 0,8 8. Tin-plated, high current terminals. Qes - 2,7 1 9. Silver-plated lead wires, for maximum reliability and conductivity. Qms - 1,5 3,4 10. Epoxy glue for basket and motor system provides perfect coupling. Spl dB 92 93,5 11. Curve memory Nomex spider for consistent, reliable performance. - Tweeter mounting accessories and woofer grille included





ESK 165L.5 300 W

ESK F165.5 270 W

A

165,5 mm 6.51 in.

ESK 163L.5 375 W

B

139 mm

5.47 in.

C

51 mm

2 in.

D

43 mm

1.7 in.

D C

E

B

102,5 mm

4.03 in.

H

82 mm

3.23 in.

I

34 mm

1.34 in.

184 mm

7.25 in.

F

25 mm

0.98 in.

K

28,3 mm

1.11 in.

J

44,3 mm

1.75 in.

R

48 mm

1.89 in.

S

10 mm

0.4 in.

T

10 mm

0.4 in.

F

A

G

E

G

I

A

44 mm

1.7 in.

B

38,5 mm

1.5 in.

C

20 mm

0.78 in.

D

8,5 mm

0.33 in.

D B

A

C S K

J

R

T


H

25

ESK F165.5 270 W


ESK 163L.5 375 W Technical Specifications

Electro-Acoustic Parameters Tweeter Midwoofer Woofer D mm 20 88 134 Xmax mm - 1,5 3 Re Ω 3,7 3 3,3 Fs Hz 1350 104 65 Le mH 0,02 0,15 0,21 Vas l - 2,3 11 Mms g 0,19 5,3 14,8 Cms mm/N 0,07 0,44 0,38 BL T·m 1,5 3,5 4,8 Qts - 0,9 0,68 0,72 Qes - 2,7 0,87 0,88 Qms - 1,5 3,1 3,8 Spl dB 92 91 92

ET 26.5 1. Tetolon dome, with hemispheric profile and wide roll surround; extremely light weight and properly damped for smooth and extended high frequency response. 2. Acoustic compression chamber; high efficiency and off-axis optimized response. 3. CCAW (Copper Clad Aluminium Wire) ultra light ferrofluid-cooled mobile voice coil. 4. High energy neodymium magnet. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Damping material; controlling acoustic resonances insuring clear, high frequenc tones. EMV 100.5 1. V-cone® for best off-axis response and clear mid-high frequency detail. 2. Water-repellent treated paper cone; butyl rubber surround. 3. Pure copper voice coil, wound on aluminium former, for exceptional thermal and mechanical capacity. 4. Large motor assembly for excellent control of voice coil. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. DIN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance. EV 165L.5 1. V-cone® for best off-axis response and clear mid-high frequency detail. 2. Water-repellent non-pressed paper cone provides deep, tight and dynamic bass output. 3. Pure copper voice coil, wound on aluminium former, for very good thermal and mechanical capacity. 4. Large motor assembly for excellent mobile voice coil control. 5. Low carbon content plates for maximum magnetic permeability and high heat dissipation. 6. Rubber magnet cover provides damping to the basket and motor structure and protects from abrasions and damages. 7. DIN size basket coated with scratch-proof, corrosive-resistant material. 8. Tin-plated, high current terminals. 9. Silver-plated lead wires, for maximum reliability and conductivity. 10. Epoxy glue for basket and motor system provides perfect coupling. 11. Curve memory Nomex spider for consistent, reliable performance. - Tweeter mounting accessories and woofer grille included



Component - Three way system Woofer size mm (in.) 165 (6.5) Midwoofer size mm (in.) 100 (4) Tweeter diaphragm mm (in.) 26 (1) Power handling W peak 375 W continuous 125 Impedance Ω 4 Frequency response Hz 50 ÷ 23k Sensitivity dB SPL 92 Woofer magnet size D·d·h mm (in.) 85 x 32 x 17 (3.55 x 1.26 x 0.7) Midwoofer magnet size D·d·h mm (in.) 70 x 32 x 10 (2.7 x 1.26 x 0.4) Tweeter magnet size D·d·h mm (in.) 19 x 3 (0.75 x 0.12) Woofer voice coil Ø mm (in.) 25 (1) Midwoofer voice coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet - High density flux ferrite Midwoofer magnet - High density flux ferrite Tweeter magnet - Neodymium Woofer cone - Water repellent non pressed paper Midwoofer cone Water repellent pressed paper Tweeter dome - Tetolon Crossover type LP/BP/HP @ 600 Hz - 12/6 dB Oct. 6 kHz - 6/12 dB Oct. Component adjustment dB +2; 0; -2 Woofer weight of one component kg (lb.) 0,98 (2.16) Midwoofer weight of one component kg (lb.) 0,45 (0.99) Tweeter weight of one component kg (lb.) 0,03 (0.07) Crossover weight of one component kg (lb.) 0,42 (0.93)

ESK F165.5 270 W


ESK 163L.5 375 W

D C A

165 mm

6.5 in.

B

142 mm

5.6 in.

C

72 mm

2.83 in.

D

65 mm

2.56 in.

A

103 mm

4 in.

A3

130 mm

5.12 in.

B

93 mm

3.66 in.

C

49 mm

1.93 in.

D

44 mm

1.73 in.

E

B A

F

E F

184 mm 25 mm

7.25 in. 0.98 in.

D C E

B A A3

E F

F

141 mm 22 mm

5.55 in. 0.86 in.

G

138,5 mm

H

109,8 mm

4.32 in.

I

41 mm

1.61 in.

5.45 in.


G

I H

A

44 mm

1.7 in.

B

38,5 mm

1.5 in.

C

20 mm

0.78 in.

D

8,5 mm

0.33 in.

D B A

C S K

J

R

T

K

28,3 mm

1.11 in.

J

44,3 mm

1.75 in.

R

48 mm

1.89 in.

S

10 mm

0.4 in.

T

10 mm

0.4 in.

27

GRILLE www.hertzaudiovideo.com

EV 130.5

150 W

EG 100.4 EG 130.4 EG 165.4 EG 130.4

EG 165.4

E

141 mm 5.55 in.

164 mm 6.45 in.

184 mm 7.25 in.

F

22 mm 0.86 in.

24 mm 0.94 in.

25 mm 0.98 in.

These grilles can be fully disassembled and are especially designed to be customized and used in one of three different combinations.

E F

EG 100.4

EG 130.4

EG 165.4

E

141 mm 5.55 in.

164 mm 6.45 in.

184 mm 7.25 in.

F

22 mm 0.86 in.

24 mm 0.94 in.

25 mm 0.98 in.



F

EG 100.4


ES 200.5

600 W

Technical Specifications Component Subwoofer Size mm (in.) 200 (8) Power handling W peak 600 cont. program 200 Impedance Ω 4 Frequency response Hz 30 ÷ 400 Sensitivity dB/SPL 88,5 Magnet size mm 120 x 60 x 34 D x d x h (in.) (4.7 x 2.35 x 1.34) Total Driver l (cu.in) 0,82 (50) Displacement Voice Coil ∅ mm (in.) 50 (2) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 3,7 (8.16) component *X-mech mm (in.) 13 (0.51) *X-mech, maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.

1. V-cone® technology with water-repellent paper membrane, for reduced moving assembly mass and increased sensitivity. 2. Wide-wave spider profile, for high mechanical resistance against impulsive stresses; its resin-bonded fibre ensures consistent electro-acoustic parameters in time. 3. High density foam surround, for extreme mechanical and acoustical linearity, even under high excursion. 4. Copper voice coil wound on aluminium former, combined with the spider support cooling system and bottom plate vent holes, for outstanding thermal capacity in power peaks. 5. Silver plated silicone shielded lead wires ending with tin-plated, high current terminals for high resistance against mechanical stress and low contact resistance. 6. High magnetic permeability plates and large magnet, ensuring a constant and even magnetic flux, for perfect low frequency control. 7. Butyl rubber gasket and magnet protective cover, provide ideal coupling to the mounting surface, damping basket resonances.

Electro-Acoustic Parameters mm 165 mm 9 Ω 2,9 Hz 40 mH 1,9 l 10,5 g 80 mm/N 0,16 T·m 10,9 - 0,5 - 0,53 - 10,57 dB 88,5

A

216 mm

8.5 in.

B

181 mm

7.12 in.

C

121 mm

4.76 in.

D

106 mm

4.17 in.

A

216 mm

8.5 in.

B

181 mm

7.12 in.

C

121 mm

4.76 in.

D

106 mm

4.17 in.





ES 250.5

750 W

Technical Specifications Component Subwoofer Size mm (in.) 250 (10) Power handling W peak 750 cont. program 250 Impedance Ω 4 Frequency response Hz 28 ÷ 300 Sensitivity dB/SPL 90 Magnet size mm 120 x 60 x 34 D x d x h (in.) (4.7 x 2.35 x 1.34) Total Driver l (cu.in) 0,65 (39.6) Displacement Voice Coil ∅ mm (in.) 50 (2) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 4 (8.82) component *X-mech mm (in.) 15,5 (0.61) *X-mech, maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.


Electro-Acoustic Parameters mm 212 mm 9 Ω 2,9 Hz 35 mH 2,3 l 27,7 g 115 mm/N 0,16 T·m 10,8 - 0,6 - 0,65 - 9,6 dB 90

A

264 mm

10.4 in.

B

234 mm

9.21 in.

C

136 mm

5.25 in.

D

119 mm

4.68 in.

A

264 mm

10.4 in.

B

234 mm

9.21 in.

C

136 mm

5.25 in.

D

119 mm

4.68 in.





ES 250D.5

750 W

Technical Specifications Component Subwoofer Size mm (in.) 250 (10) Power handling W peak 750 cont. program 250 Impedance Ω 4+4 Frequency response Hz 28 ÷ 300 Sensitivity dB/SPL 92 Magnet size mm 120 x 60 x 34 D x d x h (in.) (5.7 x 2.35 x 1.34) Total Driver l (cu.in) 0,65 (39.6) Displacement Voice Coil ∅ mm (in.) 50 (2) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 4 (8.82) component *X-mech mm (in.) 15 (0.59) *X-mech, maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.

Electro-Acoustic Parameters mm 212 mm 9 Ω 2 (parallel) Hz 40 mH 1,1 l 30,6 g 90 mm/N 0,18 T·m 7,8 - 0,66 - 0,72 - 7,9 dB 92

A

264 mm

10.4 in.

B

234 mm

9.21 in.

C

136 mm

5.25 in.

D

119 mm

4.68 in.

A

264 mm

10.4 in.

B

234 mm

9.21 in.

C

136 mm

5.25 in.

D

119 mm

4.68 in.




1. V-cone® technology with water-repellent paper membrane, for reduced moving assembly mass and increased sensitivity. 2. Wide-wave spider profile, for high mechanical resistance against impulsive stresses; its resin-bonded fibre ensures consistent electro-acoustic parameters in time. 3. High density foam surround, for extreme mechanical and acoustical linearity, even under high excursion. 4. Copper voice coil wound on aluminium former, combined with the spider support cooling system and bottom plate vent holes, for outstanding thermal capacity in power peaks. 5. Silver plated silicone shielded lead wires ending with tin-plated, high current terminals, for high resistance against mechanical stress and low contact resistance. 6. Dual voice coil configuration, to maximize the amplifier’s achievable power and improve connection versatility. 7. High magnetic permeability plates and large magnet, ensuring a constant and even magnetic flux, for perfect low frequency control. 8. Butyl rubber gasket and magnet protective cover, provide ideal coupling to the mounting surface, damping basket resonances.


ES 300.5

1050 W

Technical Specifications Component Subwoofer Size mm (in.) 300 (12) Power handling W peak 1050 cont. program 350 Impedance Ω 4 Frequency response Hz 25 ÷ 250 Sensitivity dB/SPL 92 Magnet size mm 140 x 75 x 30 D x d x h (in.) (5.5 x 3 x 1.2) Total Driver l (cu.in) 1,25 (76.3) Displacement Voice Coil ∅ mm (in.) 60 (2.4) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 5,6 (12.35) component *X-mech mm (in.) 13,5 (0.53) *X-mech, maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.



A

312 mm

12.28 in.

B

276 mm

10.86 in.

C

143 mm

5.63 in.

D

128 mm

5.04 in.

A

312 mm

12.28 in.

B

276 mm

10.86 in.

C

143 mm

5.63 in.

D

128 mm

5.04 in.





ES 300D.5

1050 W

Technical Specifications Component Subwoofer Size mm (in.) 300 (12) Power handling W peak 1050 cont. program 350 Impedance Ω 4+4 Frequency response Hz 25 ÷ 250 Sensitivity dB/SPL 93,5 Magnet size mm 140 x 75 x 30 D x d x h (in.) (5.5 x 3 x 1.2) Total Driver l (cu.in) 1,25 (76.3) Displacement Voice Coil ∅ mm (in.) 60 (2.4) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 5,6 (12.35) component *X-mech mm (in.) 14,7 (0.58) *X-mech, maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.

Electro-Acoustic Parameters mm 260 mm 9 Ω 2 (parallel) Hz 40 mH 1,2 l 44,7 g 145 mm/N 0,11 T·m 9,2 - 0,75 - 0,82 - 9,28 dB 93,5

A

312 mm

12.28 in.

B

276 mm

10.86 in.

C

143 mm

5.63 in.

D

128 mm

5.04 in.

A

312 mm

12.28 in.

B

276 mm

10.86 in.

C

143 mm

5.63 in.

D

128 mm

5.04 in.




1. V-cone® technology with water-repellent paper membrane, for reduced moving assembly mass and increased sensitivity. 2. Wide-wave spider profile, for high mechanical resistance against impulsive stresses; its resin-bonded fibre ensures consistent electro-acoustic parameters in time. 3. High density foam surround, for extreme mechanical and acoustical linearity, even under high excursion. 4. Copper voice coil wound on aluminium former, combined with the spider support cooling system and bottom plate vent holes, for outstanding thermal capacity in power peaks. 5. Silver plated silicone shielded lead wires ending with tin-plated, high current terminals, for high resistance against mechanical stress and low contact resistance. 6. Dual voice coil configuration, to maximize the amplifier’s achievable power and improve connection versatility. 7. High magnetic permeability plates and large magnet, ensuring a constant and even magnetic flux, for perfect low frequency control. 8. Butyl rubber gasket and magnet protective cover, provide ideal coupling to the mounting surface, damping basket resonances.


ES 380.5

1350 W

Technical Specifications Component Subwoofer Size mm (in.) 380 (15) Power handling W peak 1350 cont. program 450 Impedance Ω 4 Frequency response Hz 20 ÷ 200 Sensitivity dB/SPL 94 Magnet size mm 140 x 75 x 30 D x d x h (in.) (5.5 x 3 x 1.2) Total Driver l (cu.in) 1,5 (91.5) Displacement Voice Coil ∅ mm (in.) 60 (2.4) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 6 (13.23) component *X-mech mm (in.) 14,5 (0.57) *X-mech, maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.


Electro-Acoustic Parameters mm 330 mm 9 Ω 3,1 Hz 32 mH 2,64 l 98,8 g 234 mm/N 0,1 T·m 12,7 - 0,9 - 0,96 - 13 dB 94

A

395 mm

15.55 in.

B

350 mm

13.78 in.

C

167 mm

6.57 in.

D

151 mm

5.94 in.

A

395 mm

15.55 in.

B

350 mm

13.78 in.

C

167 mm

6.57 in.

D

151 mm

5.94 in.




GRILLE www.hertzaudiovideo.com

EV 130.5

150 W

ESG 200 GR - ESG 250 GR ESG 300 GR - ESG 380 GR

Protective grille with absolute unique design, featuring the Hertz logo on the screw caps. Robust and suitable for any installation, it is available in different sizes.

ESG 200 GR ESG 250 GR ESG 300 GR ESG 380 GR E F

E

214 mm 8.42 in.

262 mm 10.31 in.

311 mm 12.24 in.

390 mm 15.35 in.

F

40 mm 1.57 in.

41 mm 1.61 in.

43 mm 1.69 in.

45 mm 1.77 in.

F

E

214 mm 8.42 in.

262 mm 10.31 in.

311 mm 12.24 in.

390 mm 15.35 in.

F

40 mm 1.57 in.

41 mm 1.61 in.

43 mm 1.69 in.

45 mm 1.77 in.



ESG 200 GR ESG 250 GR ESG 300 GR ESG 380 GR


ES F20.5

600 W

Technical Specifications Component Subwoofer Size mm (in.) 200 (8) Power handling W peak 600 cont. program 200 Impedance Ω 4 Frequency response Hz 32 ÷ 400 Sensitivity dB/SPL 93 Magnet size mm 120 x 60 x 22 D x d x h (in.) (4.7 x 2.4 x 0.9) Total Driver l (cu.in) 0,4 (24.4) Displacement Voice Coil ∅ mm (in.) 38 (1.5) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 2,4 (5.28) component *X-mech mm (in.) 12 (0.47) *X-mech, maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.

1. Ultra Flat design, for maximum installation flexibility. 2. Massive motor assembly, for perfect control under high power, high excursion conditions. 3. Water-repellent pressed paper cone. 4. Copper voice coil, wound on aluminium former, for startling thermal and mechanical capacity. 5. Air decompression system based on ducts under the dust-cap, for perfect symmetry under high excursion and enhanced thermal dissipation. 6. Wide-wave, resin-bonded fiber spider for mechanical reliability and consistent parameters. 7. High current, tin-plated terminals. 8. Silver plated lead wires for maximum reliability and conductivity. 9. Basket and motor coupled and damped through special epoxy glue. 10. High thermal dissipation and magnetic permeability plates, providing constant, even flux.


A

209 mm

8.22 in.

B

181 mm

7.12 in.

C

85 mm

3.34 in.

D

72 mm

2.83 in.

A

209 mm

8.22 in.

B

181 mm

7.12 in.

C

85 mm

3.34 in.

D

72 mm

2.83 in.





ES F25.5

900 W

Technical Specifications Component Subwoofer Size mm (in.) 250 (10) Power handling W peak 900 cont. program 300 Impedance Ω 4 Frequency response Hz 30 ÷ 300 Sensitivity dB/SPL 92 Magnet size mm 140 x 70 x 20 D x d x h (in.) (5.5 x 2.8 x 0.8) Total Driver l (cu.in) 0,7 (42.7) Displacement Voice Coil ∅ mm (in.) 60 (2.4) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 3,3 (7.26) component *X-mech mm (in.) 13 (0.51) *X-mech, maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.

1. Ultra Flat design, for maximum installation flexibility. 2. Massive motor assembly, for perfect control under high power, high excursion conditions. 3. Water-repellent pressed paper cone. 4. Copper voice coil, wound on aluminium former, for startling thermal and mechanical capacity. 5. Air decompression system based on ducts under the dust-cap, for perfect symmetry under high excursion and enhanced thermal dissipation. 6. Wide-wave, resin-bonded fiber spider for mechanical reliability and consistent parameters. 7. High current, tin-plated terminals. 8. Silver plated lead wires for maximum reliability and conductivity. 9. Basket and motor coupled and damped through special epoxy glue. 10. High thermal dissipation and magnetic permeability plates, providing constant, even flux.


A

256 mm

10.07 in.

B

230 mm

9.05 in.

C

94 mm

3.7 in.

D

85 mm

3.34 in.

A

256 mm

10.07 in.

B

230 mm

9.05 in.

C

94 mm

3.7 in.

D

85 mm

3.34 in.





ES F30.5

1050 W

Technical Specifications Component Subwoofer Size mm (in.) 300 (12) Power handling W peak 1050 cont. program 350 Impedance Ω 4 Frequency response Hz 27 ÷ 250 Sensitivity dB/SPL 93,5 Magnet size mm 140 x 70 x 20 D x d x h (in.) (5.5 x 2.8 x 0.8) Total Driver l (cu.in) 1 (61) Displacement Voice Coil ∅ mm (in.) 60 (2.36) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 3,65 (8.05) component *X-mech mm (in.) 13 (0.51)

1. Ultra Flat design, for maximum installation flexibility. 2. Massive motor assembly, for perfect control under high power, high excursion conditions. 3. Water-repellent pressed paper cone. 4. Copper voice coil, wound on aluminium former, for startling thermal and mechanical capacity. 5. Air decompression system based on ducts under the dust-cap, for perfect symmetry under high excursion and enhanced thermal dissipation. 6. Wide-wave, resin-bonded fibre spider for mechanical reliability and consistent parameters. 7. High current, tin-plated terminals. 8. Silver plated lead wires, for maximum reliability and conductivity. 9. Basket and motor coupled and damped through special epoxy glue. 10. High thermal dissipation and magnetic permeability plates, providing constant, even flux.

*X-mech, maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.


D

mm 258 mm 6 Ω 2,9 Hz 38 mH 1,44 l 60 g 110 mm/N 0,15 T·m 10,4 - 0,6 - 0,7 - 4,44 dB 93,5

A

306 mm

12.04 in.

A

306 mm

12.04 in.

B

276 mm

10.86 in.

B

276 mm

10.86 in.

C

106 mm

4.17 in.

C

106 mm

4.17 in.

D

95 mm

3.74 in.

D

95 mm

3.74 in.

D

C

C

B A





EBX F20.5

600 W

Technical Specifications Component Passive Radiator Reflex Sub Box Woofer Size mm (in.) 200 (8) Passive mm (in.) 250 (10) Radiator Size Power handling W peak 600 cont. program 200 Impedance Ω 4 Frequency response Hz 40 ÷ 400 Sensitivity dB/SPL 93 Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 7,20 (15.87) component

1. ULTRA Flat profile, keeping size to a minimum for ease of placement and hidden cosmetic integration within the vehicle. 2. Constructed from 15/18 mm MDF with internal bracing, minimizing enclosure losses. 3. Slanted lower panel helps to reduce back wave reflections and eases installation. 4. Low loss foam surround Passive Radiator, for powerful, undistorted output. 5. Low profile-high excursion subwoofer unit provides bursting dynamics. 6. Molded metal grille offers total speaker protection and great cosmetic appeal. 7. Reversible Hertz Logo, configurable to the different installation positions. 8. Proprietary connection terminals provide the utmost in functionality and safety. 9. Easy-Remove metal mounting system, for a clean and reliable installation.

A

A mm 520 mm 520 20.5 in.20.5 in.

B

108 4.3 in. 4.3 in. B mm 108 mm 320 12.6 in.12.6 in. C mm 320 mm

C D E

15°

220 8.7 in. 8.7 in. D mm 220 mm 149 5.9 in. 5.9 in. E mm 149 mm

15°



MOUNTING ACCESSORIES


900 W

A

A 670 mm

670 26.4mm in.

26.4 in.

B

119 mm B

4.7 mm in. 119

4.7 in.

C

403 mm C

15.9mm in. 403

15.9 in.

D

310 mm D

12.2mm in. 310

12.2 in.

152 mm

6.0 in.

E

152 mm

E

6.0 in.

15°

15°



EBX F25.5


EBX 200.5

500 W

Technical Specifications Component Bass Reflex Sub Box Size mm (in.) 200 (8) Power handling W peak 500 cont. program 250 Impedance Ω 4 Frequency response Hz 30 ÷ 400 Sensitivity dB/SPL 91 Magnet size mm 390 x 310 x 288 D x d x h (in.) (15.3 x 12.2 x 11.3) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 11,5 (25.3) component

A

390 mm

15.3 in.

B

310 mm

12.2 in.

C

288 mm

11.3 in.



1. 20 mm MDF employed to minimize enclosure losses. 2. Slanted rear panel helps reduce back wave reflections and eases installation. 3. Xponential Flanged Duct.® for powerful, undistorted output; perfect for the long excursion subwoofer used. 4. Molded composite grille offers total speaker protection and great cosmetic appeal. 5. Proprietary connection terminals provide the outmost in functionality and safety. 6. Ergonomic anti-slip rubber handles aid in the removal of the enclosure.


EBX 250.5

700 W

Technical Specifications Component Bass Reflex Sub Box Size mm (in.) 250 (10) Power handling W peak 700 cont. program 350 Impedance Ω 4 Frequency response Hz 28 ÷ 300 Sensitivity dB/SPL 93 Magnet size mm 465 x 365 x 338 D x d x h (in.) (18.3 x 14.3 x 13.3) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 15,1 (33.2) component

A

465 mm

18.3 in.

B

365 mm

14.3 in.

C

338 mm

13.3 in.





EBX 300.5 1000 W Technical Specifications Component Bass Reflex Sub Box Size mm (in.) 320 (12) Power handling W peak 1000 cont. program 500 Impedance Ω 4 Frequency response Hz 25 ÷ 250 Sensitivity dB/SPL 94 Magnet size mm 545 x 387 x 400 D x d x h (in.) (21.4 x 15.2 x 15.7) Magnet High density flux ferrite Cone Water repellent pressed paper Weight of one kg (lb.) 19 (41.8) component

A

545 mm

21.4 in.

B

387 mm

15.2 in.

C

400 mm

15.7 in.




ABOUT US Elettromedia, an Italian company, is a leader within the world-wide car Hi-Fi market. Born in 1987 in Potenza Picena by a group of friends who shared the same passion for in-car high fidelity, throughout the past years Elettromedia has been walking the path of excellence: its products are distributed in more than 50 countries; the company has received many awards and acknowledgements from the most authoritative leaders within the car audio industry; it also can boast reviews of more than 3000 pages published in 30 different languages (visit: www.elettromedia.it/press_area.asp). The Elettromedia brands are Audison, Hertz, Connection and AZaudiocomp. Through a co-branding strategy, the company offers all of the components required for a complete, top-level car audio system.

CONTACTS: Elettromedia s.r.l. Strada Regina km 3,500 - 62018 Potenza Picena (Mc) - Italy T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it


AWARDS

44


Press Kit

(www.elettromedia.eu, Press Room) Energy Product Information (PDF version, 150 dpi resolution) Logos: Hertz, Energy, V-cone, Compact Size, Ultra Flat, RHFC (Adobe Illustrator version, 300 dpi resolution) Photos (JPG version, 300 dpi resolution)

EV 165.5

EV F165.5

ECX 165.5

EMV 100.5

EV 130.5

EV 165L.5

ECX 100.5

ECX 130.5


ET 26.5

ECX 570.5

ECX 690.5 45


ESK 130.5

ESK 165.5

ESK 165L.5

ESK F165.5

ES 200.5

ES 250.5

ES 300.5

ES 300D.5


ESK 163L.5

ES 250D.5

ES 380.5 46


ES F25.5

EBX F20.5

EBX 200.5

ES F30.5

EBX F25.5

EBX 250.5

EBX 300.5


ES F20.5

Technologies

Elettromedia_Headquarter 47