QUALITY IMPROVEMENT PROGRAMME - National Doctoral Fellowship

NDF NATIONAL DOCTORAL FELLOWSHIP SCHEME Admission to Ph.D. Programmes for the Academic year 2018-2019 (For Young Postgraduate Students from AICTE approved Degree level Engineering/Technology/Pharmaceutical Institutions)

INFORMATION BOOKLET Sponsored by

All India Council for Technical Education (A Statutory Body of Government of India)

National Nodal Centre

PSG College of Technology, Avinashi Road, Peelamedu, Coimbatore – 641 004 www.psgtech.edu 1 Ph : 0422-4344426

-

DATES TO REMEMBER Portal opening date

May 07, 2018

Access to on line submission of applications

May 12, 2018

Closing of on line applications submission

June 10, 2018

Display of final list of students eligible for interview Interviews at selected academic institutions Display of selected candidates and their allotted institutes Reporting at institute by candidates

June 14, 2018 June 18, 2018 – July 10, 2018 July 15, 2018 July 31, 2018

Only online application is required for processing.

2

TABLE OF CONTENTS Sl. No. No. I. II. III. IV. V. VI. VII. VIII. IX. X. XI. XII. XIII. XIV. XV. XVI.

DETAIL

Page

General Information Institutions offering Ph.D. degree programmes and their codes Codes for Departments offering Ph.D. degree programmes at various institutions Eligibility Criteria Duration of the Scheme Intake of the Scheme Reservation policy Disbursement of the funds Processing Methodology Terms and Conditions Instructions for completing the online application Application Fee Enclosures Final Procedure for admission Schedule of Interviews for Admission to Ph.D. degree Programmes under NDF Departments and Fields of Specialization at Various Institutions

5 6 8 12 12 12 12 12 12 12 14 15 15 15 16 17

QIP Minor Centre (Engineering) 1. BMS College of Engineering, Bangalore 2. Coimbatore Institute of Technology, Coimbatore 3. College of Engineering Trivandrum, Thiruvananthapuram 4. College of Engineering, Pune 5. Govt. Engineering College, Thrissur 6. Jadavpur University, Kolkata 7. Madhav Institute of Technology & Science, Gwalior 8. Netaji Subhas Institute of Technology, New Delhi 9. Pondicherry Engineering College, Puducherry 10. PSG college of Technology, Coimbatore 11. Rajiv Gandhi Institute of Technology, Kottayam 12. Shri Guru Gobind Singhji Institute of Engg. & Tech., Nanded 13. Thiagarajar College of Engineering, Madurai 14. TKM College of Engineering, Kollam 15. Veer Surendra Sai University of Technology, Burla 16. Walchand College of Engineering,Vishrambag, Sangli 17. Govt. College of Engineering Amravati 18. Govt. College of Engineering Aurangabad 19. Indira Gandhi Institute of Technology,Sarang 20. Sant Longowal Institute of Engineering & Technology,Longowal 21. The National Institute of Engineering, Mysore 22. Veermata Jijabai Technological Institute (VJTI), Mumbai

17 17 18 18 19 20 21 21 21 23 24 24 26 26 27 27 28 28 28 29 30 30

QIP Centre (Pharmacy) 23. BharatiVidyapeeth Deemed University, Pune Poona College Of Pharmacy, Pune, 24. Delhi Institute of Pharmaceutical Science & Research (Dipsar), New Delhi 25. JSS College Of Pharmacy Post Box No. 20, Rocklands, Ootacamund-643001, The Nilgiris 26. Jadavpur University (Pharmacy) Kolkata, West Bangal 27. Birla Institute Of Technology (Bit) Mesra, Ranchi, Jharkhand. 28. Manipal College Of Pharmaceutical Sciences Manipal University, Madhav Nagar,Manipal, Udupi Dt.

31 31 31 31 32 32

3

Department Supervisor details and vacancies available

33

QIP Minor Centre (Engineering) 23. BMS College of Engineering, Bangalore 24. Coimbatore Institute of Technology, Coimbatore 25. College of Engineering Trivandrum, Thiruvananthapuram 26. College of Engineering, Pune 27. Govt. Engineering College, Thrissur 28. Jadavpur University, Kolkata 29. Madhav Institute of Technology & Science, Gwalior 30. Netaji Subhas Institute of Technology, New Delhi 31. Pondicherry Engineering College, Puducherry 32. PSG college of Technology, Coimbatore 33. Rajiv Gandhi Institute of Technology, Kottayam 34. Shri Guru Gobind Singhji Institute of Engg. & Tech., Nanded 35. Thiagarajar College of Engineering, Madurai 36. TKM College of Engineering, Kollam 37. Veer Surendra Sai University of Technology, Burla 38. Walchand College of Engineering,Vishrambag, Sangli 39. Govt. College of Engineering Amravati 40. Govt. College of Engineering Aurangabad 41. Indira Gandhi Institute of Technology,Sarang 42. Sant Longowal Institute of Engineering & Technology,Longowal 43. The National Institute of Engineering, Mysore 44. Veermata Jijabai Technological Institute (VJTI), Mumbai

77 82 90 91 94 96 97 98 101 102 104 106 111 114

QIP Centre (Pharmacy) 28. BharatiVidyapeeth Deemed University, Pune Poona College Of Pharmacy, Pune, 29. Delhi Institute of Pharmaceutical Science & Research (Dipsar), New Delhi 30. JSS College Of Pharmacy Post Box No. 20, Rocklands, Ootacamund-643001, The Nilgiris 31. Jadavpur University (Pharmacy) Kolkata, West Bangal 32. Birla Institute Of Technology (Bit) Mesra, Ranchi, Jharkhand.

117 120 123 127 128

33. Manipal College Of Pharmaceutical Sciences Manipal University, Madhav Nagar, Manipal, Udupi Dist.

131

4

33 40 46 52 61 69 75

I. GENERAL INFORMATION 1. Admission under NDF scheme for full time PhD is offered under AICTE recognized selected minor QIP centres in some specific departments. The list of QIP centres offering full time PhD under this scheme is given in the brochure. 2. Candidate should visit the website http://aicte-ndf.psgtech.ac.in for submitting online application, updated information related to: receipt of completed application, candidates called for interview, selected list of candidates and all other information pertaining to NDF admission. 3. Candidate should read the information booklet available in the above web site thoroughly before filling the fields in the online application. 4. Candidates must only submit their application form online through http://aicte-ndf.psgtech.ac.in. Candidate should make sure that proper Institute / Discipline codes are selected, all relevant details are duly filled in the respective fields. Access to the link for online submission of application opens on May 12, 2018 (Saturday). Last date for the online submission of application is June 10, 2018 (Sunday). 5. The candidate should submit the on-line application form along with relevant enclosures mentioned in the Information Booklet. The candidate should also pay an application fee through on-line for Rs. 500/- in respect of General/OBC category students and for Rs. 250/- in respect of reserved category students (SC/ST/PH). 6. Information given by the candidate in the application for all of the options chosen, must be uniform and correct. In case of any difference observed in the data relating to category, marks, addresses, age etc., his/her candidature is liable to be cancelled at any stage even after the selection/ admission. 9. Applications submitted without the required enclosures will automatically be rejected. Please note that no corrections/ additions/deletions to the recommendation format is permitted. Changes to the format of the forwarding / recommendation note will not be accepted. 10. The application number allotted during the online registration should be quoted in all correspondences. If the application number changes due to some unavoidable circumstances this change will be intimated through email to the candidate. The changed application number may be quoted in all cases. 11. Short-listed candidates will receive Interview Call/Admission letter from the respective NDF Coordinator of the Institute, where they have applied to seek admission. The Principal Coordinator NDF will not send any Call letter to the candidate directly. 12. Interview schedule is final and cannot be altered/ changed under any circumstances. Candidates a r e r e q u i r e d to appear for interview at the Institute(s), where he/she would like to seek admission. Candidates may plan their travel accordingly. 13. Concessions, relaxation, and reservations for candidates belonging to SC/ST/OBC/Physically Disabled/Female candidates are as per rules. The reservation rules of GOI will be applied to overall admissions by the AICTE. The selection of a candidate is considered only after the recommendation of the minor QIP center.

5

II. INSTITUTIONS OFFERING Ph.D DEGREE PROGRAMMES UNDER NDF AND THEIR CODES Sl. No. 1.

2.

3.

4.

Name of the Institute/University B.M.S. College of Engineering, Bangalore – 560 019 1 3(i) Civil Engineering, (ii) Electrical Engineering, (iii) Mechanical Engineering, . (iv) Industrial Engineering & Management, (v) Electronics & Communication Engineering. 1Coimbatore Institute of Technology, Coimbatore – 641 014 4 (i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical & Electronics Engineering, . (iv) Chemical Engineering. College of Engineering Trivandrum Thiruvananthapuram – 695 016 1 5(i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical Engineering, . (iv) Electronics & Communication Engineering. College of Engineering, Pune(Maharashtra) – 411 005 (i) Civil Engineering, (ii) Mechanical Engineering, (iii) Production Engineering, (iv) Electrical Engineering, (v) Electronics & Telecommunication, (vi) Computer Engineering (vii) Instrumentation & Control (viii) Metallurgy &Materials Science

Code BS

CC

CT

CP

5.

1Govt. Engineering College Govt. of Kerala, Thrissur – 680 009 9(i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical Engineering. .

GK

6.

2Jadavpur University, Kolkata – 700 032 3 . (i) Electrical Engineering, (ii) Electronics & Telecommunication Engineering, (iii) Mechanical Engineering (iv) Production Engineering

JU

7.

2Madhav Institute of Technology & Science, Gwalior – 470 005 5 . (i) Civil Engineering, (ii) E l e c t r i c a l E n g i n e e r i n g , ( i i i ) Computer Science & Engineering, (iv) Mechanical Engineering (v) Architecture

MG

8.

5Netaji Subhas Institute of Technology, New Delhi - 110 078 2 (i) Electronics communication Engineering (ii) Computer Engineering (iii) Instrumentation & Control (iv) Manufacturing Process & Automation (v) Biotechnology

NN

9.

5Pondicherry Engineering College, Puducherry - 605 014 4 (i) Electronics & Communication Engineering (ii) Computer Science & Engineering (iii) Electrical Engineering (iv) Mechanical Engineering (v) Civil Engineering

PY

10. 3PSG College of Technology, Coimbatore – 641 004 3(i) Mechanical Engineering (ii) Production Engineering .

PS

11. 4Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam - 686 501 9 (i) Electrical Engineering (ii) Mechanical Engineering (iii) Civil Engineering

RG

12. 3Shri Guru Gobind Singh Institute of Engineering & Technology, Nanded – 431 606 6 . (i) Electronics & Communication Engineering, (ii) Instrumentation & Control, (iii) Production Engineering, (iv) Civil Engineering, (v) Mechanical Engineering,

SG

13. 3Thiagarajar College of Engineering, Madurai – 625 015 8 . (i) Civil Engineering, (ii) Electrical Engineering, (iii) Mechanical Engineering, (iv) Electronics & Communication Engineering., (v) Computer Science & Engineering.

TM

14. 6TKM College of Engineering, Kollam (Kerala) - 691 005 0 (i) Civil Engineering (ii) Mechanical Engineering

TK

6

15. 4Veer Surendra Sai University of Technology, Burla (Orissa) 0(i) Civil Engineering, (ii) Electrical Engineering, (iii) Electronics & Communication Engineering, . (iv) Mechanical Engineering. (v) Production Engineering. 16. Walchand College of Engineering, Sangli 416 415 – WS (i) Civil Engineering, (ii) Electrical Engineering, (iii) Electronics & Communication (ii) Engineering, (iv) Mechanical Engineering. (v) Computer Science & Engineering.

VB

WS

17.

Govt. College of Engineering Amravat-444 604 (i) Civil Engineering, (ii) Electrical Engineering,(iii) Mechanical Engineering.

AM

18.

Govt. College of Engineering Aurangabad-431 005 (Maharashtra) (i) Civil Engineering, (ii) Electrical Engineering, (iii) Electronics & Communication

GA

Engineering, 19.

Indira Gandhi Institute of Technology,Sarang, Odisha - 759 146 (i) Civil Engineering, (ii) Electrical Engineering, (iii) Mechanical Engineering.

IO

20.

Sant Longowal Institute of Engineering & Technology, , (Deemed University), Punjab - 148 106 (i) Mechanical Engineering (ii) Food Engineering & Technology

SP

(iii) Electronics & Instrumentation Engineering (iv)Chemical Technology 21.

The National Institute of Engineering, Mysore– 570 008 (i) Civil Engineering, (ii) Electrical Engineering, (iii) Industrial Engineering (iv) Production,

NM

(v) Computer Science & Engineering (vi) Information Technology 22.

Veermata Jijabai Technological Institute (VJTI), Mumbai- 400019 (i) Civil Engineering (ii) Electrical Engineering (iii) Mechanical Engineering (iv) Electronics Engineering

VM

(v) Textile Technology

23.

BharatiVidyapeeth Deemed University, Pune Poona College Of Pharmacy, Erandwane, Pune, Maharashtra

PC

24.

Delhi Institute of Pharmaceutical Science & Research (Dipsar) PushpVihar, Sector-III, M.B. Road, New Delhi

DI

25.

JSS College Of Pharmacy Post Box No. 20, Rocklands, Ootacamund-643001, The Nilgiris, Tamilnadu

JS

26. Jadavpur University (Pharmacy) Kolkata, West Bangal

JV

27. Birla Institute Of Technology (Bit) Mesra, Ranchi, Jharkhand

BI

28.

Manipal College Of Pharmaceutical Sciences Manipal University, Madhav Nagar, Manipal, Udupi Dist., Karnataka

7

MC

III. CODES FOR DEPARTMENTS OFFERING TO Ph.D. DEGREE PROGRAMMES AT VARIOUS INSTITUTIONS Department/Centre

Code

Institution(s) Offering Ph.D. Degree Programme

Aerospace Engineering

AE

BG, BM, KH, KN, MD

Aeronautical Engineering Aerospace Engineering and Applied Mechanics

AE AE

AU BE

Advance Technology Development Centre

AT

KH

Agriculture & Food Engineering

AG

KH

Alternate Hydro Energy Centre Applied Mechanics

AH AM

RR DL, MD, MN

Applied Mechanics & Hydraulics

AM

SK*

Applied Research In Electronics

AL

DL

Architecture & Planning

AR

RR, MG

Architecture & Regional Planning

AP

KH

Atmospheric & Oceanic Sciences Atmospheric Sciences Automobile Engineering

AS AS AU

BG DL AU

Biochemical Engineering & Biotechnology Biomedical Engineering

BC BM

DL,VN DL, VN

(School of) Biosciences & Bioengineering

BS

BM, VN

Biotechnology

BT

GW, KH, MD,ND, NN, RR

Ceramic Engineering

CM

RK

Centre of Excellence in Disaster Mitigation & Management.

DM

RR

Centre of Nanotechnology

NT

RR

Centre for Studies in Resources Engineering

SR

BM

Centre for Sustainable Technology

ST

BG

Chemical Engineering

CH

AU, BG, BM, CC, DL, GW,HK, KH, KN, MD,MJ, ND, RK, RR, SK,SS, WR, TR, VN

Chemistry

CY

BM, DL, GW, KH, KN, MD,MN, RR

Civil Engineering

CE

AM,AU, BB, BE, BG, BM*, BS, CC, CL, CP, CT, DD, DL*, GA, GC, GK, GN, GS, GW,GZ,HK,IO, KH, KN*, MD*, MG, MI,MJ, MM,MN,NA,ND, NM,NS,PY,RG, RR*, SG, SK*,SM,SS, SV, TK,TM, UV, VB,VM, WR, WS, VN,AC,NK,OU,NH,NJ

Civil Engineering

CV

Computer Science & Automation

CS

Computer Science & Engineering

CS

Computational and Data Sciences

CD

BM, BS, CP, DL, GS, GW,GZ, KH, KN, MD, MG,MN,ND, NM, NS,PD,PY,SK, SV, TM,TR, WS,RR,VN, CP,NN,SS,UH,NK,TU,OU,NH BG

Cryogenic Engineering

CR

KH

Centre for Educational Technology Centre for Oceans, Rivers, Atmosphere and Land Sciences

ET

KH

EV

KH

DE

GW

Design

TR BG

8

Earth Science

ES

BM, RR

Earthquake Engineering

EQ

RR

Department/Centre

Code


EE

GW,TR, CC, GK, SK, PY,AC,OU,NH

EC

BG

Electrical Engineering

EE

AM,AU, BG, BM*, CC, CL, CP, CT, DL, GA, GC, GK, GS, GN,GZ, JU*,IO, KH, KN, MD, MG,MJ, MM, MN,NA,ND, NM, NS,RG, RK, RR,SS, SV, TM, VB, WS, VM, BE, VN,NK,CA,JM,OU,NH,NG


EP

VR, MT

Electronics & Communication Engineering

EC

BB, BS, CL, CT, DD, GA, GW, GS ,MG, MM, NM, PD, RK, SG, SK, SV, TM, VB,PY,NN,ND,TU

Electronics & Electrical Comm. Engineering

EC

KH, SK

Electronics & Telecommunication Engineering

EC

JU*, CP, JU

Electronics Engineering

EC

AU,MN,VM,WS, HK, VN

Electronic Design & Technology (centre)

ED

BG

Energy (centre)

EN

GW,TU

Energy Studies

EN

DL

Energy Science & Engineering

EN

BM, KH

Engineering Design

ER

MD

Environment (centre)

EV

GW

Environmental Science & Engineering

EV

BM

Electrical & Electronics Engineering Electrical Communication Engineering

Food Engineering & Technology

SP,TU

FE

Geology and Geophysics

GG

KH

G.S. Sanyal School of Telecommunication

GT

KH

Humanities & Social Sciences

HS

BM, DL, GW, KH, KN, MD,MN, RR

Humanities

SK

HS

Hydrology

HY

RR

Industrial Tribology, Machine Dynamics & Maintenance Engineering

TR

DL

Industrial & Management Engineering

IM

KN

Industrial Design Centre

ID

BM

Industrial Engineering & Operations Research

IO

BM

Industrial and Systems Engineering

IE

KH

Industrial Engineering & Production Engineering

IP

GS, NM

Industrial Engineering

IE

BS, NM

Information & Communication Engineering

IC

AU

Information Technology

IT

MM, NM, SV, BE

Instrumentation & Control

IC

CP,NN,TR

Instrument Design & Development

ID

DL

Instrumentation Engineering

IN

AU, CP, SG

Instrumentation and Applied Physics

IN

BG

9

Infrastructure Design and Management

ID

KH

Medical Science and Technology

SP

KH

Leather Technology

LT

AU

Management Studies

MS

MD

Department/Centre

Code


Management Studies

MG

BG, RR, DL,KH

Material Research Centre

MR

BG

Materials & Metallurgical Engineering

MT

KN, CP

Materials Science & Technology

MS

KH, KN,VN

Mathematics

MA

BG, BM, DL, GW, KH, MD, RR, VN

Mathematics & Humanities

MH

WR

Mathematics/Statistics

MA

KN

Manufacturing Process & Automation

MP

NN

Mechanical & Industrial Engineering

ME

RR AM,AU, BB, BG, BM, BS, CC, CL, CP, CT, DD, DL, GK, GC, GS, GN, GW,GZ,HK,IO, KH, KN, JU*, MD, MG,MJ, MM, MN,NA, ND,PD, PS,PY, RG, RK*, SG, SK,SP,SS, SV,TK, TM,TR, VB,VM, WR, WS, BE, VN,AC,NK,OU,NH,NJ,NF

Mechanical Engineering

ME

Mechanical & Manufacturing Engineering

MM

MI

Metallurgical & Materials Engineering

MM

MD, MJ,ND, RK, RR

Metallurgical & Materials Engineering

MT

KH, SK ,TR

Metallurgical Engineering & Materials Science

MM

BM

Metallurgical Engineering

MT

VN,VR

Materials Engineering

MT

BG

Metallurgy & Materials Science

MT

CP

Metallurgy & Materials Engineering

MT

BE

Mining Engineering

MI

IS, KH, RK, SK ,VN, BE

Nuclear Engineering and Technology

NE

KN

Ocean Engineering

OE

MD

Ocean Engineering & Naval Architecture

ON

KH

Paper Technology

PP

RR

Product Design

PD

BG

Physics

PH

BG, BM*, DL, GW, KN, MD,MN, RR,KH

Polymer Science & Engineering

PS

DL

Polymer Science & Chemical Technology

PS

DD

Production Engineering

PE

CP, JU*,NA, NM, PS, SG,TR, VB

Production Technology

PT

AU

Paper Technology

PP

RR

Reliability Engineering

RE

KH

Rubber Technology

RT

KH

10

Rural Development

RD

KH

Rural Development & Appropriate Tech

RD

DL

School of Information Technology

IT

KH

School of Management

MG

BM,MN

Super Computer Education & Research

SE

BG

Sustainable Technologies (Centre)

ST

BG

Department/Centre

Code


Systems & Control Engineering

SC

Textile Engineering Textile Technology

TX

GZ

TX

DL,VM

Centre for Transportation Systems (CTRANS)

TS

RR

Water Resources Development & Management

WR

RR,KH

Water Resource Irrigation

WI

NR

Farm Machinery & Power Engineering

FM

CA

Processing & Food Engineering

PF

CA

Soil & water Engineering

SW

CA

Renewable Energy Engineering

RE

CA

BM

*Specialization have to be indicated while opting for the particular department. Codes for the Specializations are given along with the details corresponding to the particular institution (Depts. & Field of Specialization)

11

IV.

ELIGIBILITY CRITERIA (a)

The fellowship/contingency will be granted to research scholars admitted in research institute of AICTE. National Nodal Centre will augment the process for selecting candidates as per the eligibility criteria for grant of National Doctoral Fellowship.

(b)

The candidate must have secured cumulative grade point average of 7.5 on the scale of 10 or equivalent at both B.E/B.Tech/B.Pharm and M.E/M.Tech/M.Pharm. In addition to above the candidate should have qualified GATE/GPAT during the last 5 years. For SC/ST/PH candidates CGPA requirement will be 7.0 on the scale of 10 or equivalent or general candidate must have secured 75% marks or above & 70% marks for candidates of reserved categories.

(c)

The candidate should be less than 30 years of age as on 31 August of year of application however age relaxation of 5 years would be applicable to candidates belonging to SC/ST, women and physically challenged category.

V.

st

DURATION OF THE SCHEME The duration of the scheme shall be for a period of 3 Years. No further extension will be granted, however, extendable by 6 months in special cases with the recommendation of Institute and approval of National Nodal Centre. Further extension of 6 months may be given on the recommendations with the approval of AICTE.

VI.

INTAKE OF THE SCHEME The total number of candidates selected under this scheme per year would be limited to 150 per year. Number of candidates/Institute would be about 3 per Institute subject to the availability of seats in the research centre and demand of a research centre by candidates. If the seats allotted to the institution remain vacant, these seats will be allotted to the other institutions by the Nodal Centre on the approval of AICTE.

VII.

RESERVATION POLICY Reservation for fellowship shall be as per Central Reservation Policy i.e. 15% to SC candidates, 7.5% to ST candidates and 27% to OBC candidates (NCL only), and will be observed at National level.

VIII.

DISBURSEMENT OF THE FUNDS The candidate will be provided the fellowship of Rs. 28,000/- per month + House rent allowance wherever the hostel accommodation/Institute accommodation is not available as per the rates of Ph.D. Scholarship notified by Ministry of Human Resource Development, Department of Higher Education (Technical Section-I) vide F. Number 17-2/2014TS.I dated 18.02.2015.Contingency grant will be admissible at the rate of Rs.15,000/- per annum.

IX.

PROCESSING METHODOLOGY Candidates will be identified by the National Nodal Centre of AICTE as per the functions and duties of National Nodal Centre.

X.

TERMS AND CONDITIONS (a)

Admission is possible only to the Institutions and the Departments listed in the Information brochure.

(b)

The final admission of the candidate will be subject to the clearance and approval by the Admission Wing (Section) of the concerned institution as per its rules and regulations in force at the time of admission.

(c)

The candidate, if selected, should get relieved himself if presently employed anywhere before joining the programme in time for the session to which he/she is admitted.

(d)

If a NDF scholar discontinues Ph.D programme, the scholar has to refund the scholarship and contingency received to the AICTE through the NDF National Nodal Centre

12

(e)

The awardee shall submit an annual report on the progress, each year through the Research Supervisor, Head of the Department and Head of the Institute.

(f)

The final progress report should be submitted by the awardee through the Head of the Department / Institution to the AICTE.

(g)

The awardee shall not be allowed for transfer of award from the Institution where the awardee is presently working for Ph.D. during the entire tenure of the award.

(h)

The awardee shall devote full time to research during the tenure of fellowship and will not be permitted to take any part time/full time assignment. He/She will not accept any other salary or fellowship, if offered during the tenure of fellowship through any other source. The nature of the candidature (Full time AICTE sponsored National Doctoral Fellow) will not be changed during the program. The awardee shall give a declaration that if the results of research are such that can be exploited commercially by taking a patent or otherwise commercial exploitation and patent rights should be with the Institute, candidate and supervisor. However, the rules of respective research institute, if any, in this regards will be applicable.

(i)

(j)

AICTE online portal will have PG Scholarship portal like mechanism for the purpose of releasing fellowship/HRA etc amount directly in the bank account of the beneficiary through DBT.

(k)

The service conditions mentioned in the Ministry of Human Resource Development, Department of Higher Education (Technical Section-I) instruction notified vide F. Number 17-2/2014-TS.I dated 18.02.2015 shall be applicable to awardees.

(l)

If the progress of the candidate is not satisfactory as reported by the supervisor/Head of the Department /Head of the research institute, the fellowship of the candidature will be terminated with immediate effect. This will not be revoked under any circumstances.

(m)

The PhD rules/regulations of the research institute and affiliating university will be applicable to all admitted candidates under this scheme.

13

XI. INSTRUCTIONS FOR COMPLETING THE ONLINE APPLICATION PROCEDURE FOR ADMISSIONS UNDER NDF General Instructions for completing the online application 1. 2.

The website link for application is : http://aicte-ndf.psgtech.ac.in The candidate should first register by clicking “New Registration”. An email confirming the registration will be sent by assigning the application number and a password. The application number and the password are required for subsequent operations. Hence the candidate should remember both of them or keep them at a safe place.

3.

Candidate can start filling up the online application by logging in through login page.

4.

On-line application can be completed in one or more sessions by revisiting the website using the assigned application number and password The candidates can save the progress of entering data by clicking on SAVE and EDIT button .

5.

The candidate should enter all required information correctly in all fields of the online application.

6.

After filling the fields, the candidate can save the final information by using the SUBMIT button. Once submitted the candidate will not be able to edit the application. The last date for the on-line submission of application is June 10, 2018 (Sunday).

Personal Information 7

After completing the Name and Address fields enter Date of Birth; Gender as „Male‟ or „Female‟; the category by ‟General‟, „SC‟, „ST‟, or „OBC‟; put „Yes‟ if you belong to Physically Disabled Category and “No‟ if you do not; Married as „Yes‟ if you are married and „No‟ if you are single.

Educational Qualifications and Academic Data 8.

During the process of entering the application details, additional sub-links are provided in appropriate places. For example, while entering the overall performance of the candidate under „Educational Qualifications‟, there will be a link through which the candidate can furnish the semester wise / year wise particulars.

9.

For filling Academic data and Additional qualification, if the absolute marks are awarded, then fill, e.g. 650/800 where the total marks obtained is 650 out of total of 800. If the Grade Point Average (GPA) is awarded, fill, e.g. 6.7/10 where 6.7 is GPA obtained on a scale of 10. If the candidate has failed in any subject during any semester examination and cleared that subject in a later semester, the marks obtained in that subject should be added back to the semester in which it was supposed to have been cleared and then the total marks is to be calculated. Candidate should take the marks of all the semesters for calculating the overall percentage or CGPA (irrespective of the methodology adopted by the university/college in awarding final class/division).

10.

During the entry of details like detailed semester wise / year wise information, detailed teaching experience etc., the candidate has to enter the details for which documents of proof are to be attached.

Institute and Department Preferences 11. A candidate can apply to a maximum of three institutions and a maximum of three departments in each of the chosen Institutes (i.e., maximum of total NINE options only) and can choose any three thrust areas in which he/she want to pursue research. 12. Select the Institution by using the pull-down-menu as per the order of your preference. Then enter the programme code desired as per preferred choices with valid code. 13. Appropriate list of „valid codes‟ can be viewed using links provided. The Programme code contains 6 characters; the first 2 alphabets identify the Institute, the next 2 alphabets identify the department within the Institute and the last 2 digits identify the thrust area. For example, a code „CPEC01‟ represents a thrust area in the Department of Electronics & Communication Engineering, College of Engineering, Pune.

14

Preview of Application 14. Once the complete details about the candidate are entered and saved, the on-line application can be printed. To preview the completed application, the candidate can print a draft copy of the application. He should check the completeness and correctness of the information; if needed, corrections can also be made before the final submission. Final Confirmations

15. T he candidate should upload his/her recent stamp-size photograph in the space provided. 16. After finalizing the contents of the application, the candidate should press the SUBMIT button on the on-line application. Once the SUBMIT button is pressed, the candidate will not be allowed to modify the contents of the application. 17. Applications submitted without the required enclosures will automatically be deemed invalid. XII. APPLICATION FEE 18. The candidate should submit the on-line application form along with relevant enclosures given below. The candidate should also pay an application fee through on-line for Rs. 500/- in respect of General/OBC category students and for Rs. 250/- in respect of reserved category students (SC/ST/PH).

XIII. ENCLOSURES 19. Candidates belonging to SC, ST or OBC category, must attach an attested copy of the caste certificate issued by a competent authority as per the Government of India rules. 20. Physically Disabled candidates must attach a copy of the certificate issued by a competent authority as per Government of India rules. 21. Enclose attested copies of all the relevant certificates o o o o o o o o o o o

Certificates of the Qualifying Examination (Bachelor and Master) and other Degrees Age proofing Certificate Mark Lists of all years/semesters of qualifying examination (mark sheets clearly showing total marks obtained out of maximum marks according to semester or year) Teaching Experience Industrial/Research Experience Certificates. The certificates of Short Term Courses attended. All Research Publications. Any other Academic qualifications/Awards etc. GATE/GPAT Score Card Community Certificate Physically Disabled Certificate (if necessary)

XIV. FINAL PROCEDURE FOR ADMISSION 1.

Short-listing of the candidates will be done first by the office of the Principal Coordinator, then finally at the Department/Institute concerned to which the candidate has applied. Interview letters will be sent to the short-listed candidates by the Department/Institute concerned.

2.

Interviews will be conducted in the Departments at the individual Institutions. Schedule of interviews is provided National Nodal Center and will also be available in the information booklet available in the web portal http://aictendf.psgtech.ac.in.. Please note that No TA/DA will be paid to candidates for attending the Interviews.

3.

Selections will be made by the National Nodal Centre in consultation with AICTE based on the recommendations of various institutions.

4. Final Results will be available at the web site: http://aicte-ndf.psgtech.ac.in. Admission letters will be issued to the selected candidates by the respective QIP centres or Academic sections of the institutions offering admission.

15

XV. SCHEDULE OF INTERVIEWS FOR ADMISSION TO Ph.D. DEGREE PROGRAMMES UNDER QIP The following dates of interview at various QIP Centres, finalized by AICTE and National Nodal Center, are final and cannot altered under any circumstances S.No

Institute

Interview Date

Day

QIP Minor Centre(Engineering) 1

BMS College of Engineering, Bangalore, Karnataka

21.06.2018

Thursday

2

Coimbatore Institute of Technology, Coimbatore,Tamil Nadu

28.06.2018

Thursday

3

College of Engineering Trivandrum, Thiruvananthapuram,Kerala

19.06.2018

Tuesday

4

College of Engineering, Pune,Maharashtra

25.06.2018

Monday

5

Govt. Engineering College, Thrissur,kerala

27.06.2018

Wednesday

6

Jadavpur University, Kolkata

10.07.2018

Wednesday

7

Madhav Institute of Technology & Science, Gwalior,Madhya Pradesh

09.07.2018

Monday

8

Netaji Subhas Institute of Technology, New Delhi

18.06.2018

Monday

9

Pondicherry Engineering College, Puducherry

05.07.2018

Thursday

10

PSG college of Technology, Coimbatore,Tamil Nadu

25.06.2018

Monday

11

Rajiv Gandhi Institute of Technology, Kottayam,Kerala

20.06.2018

Wednesday

12

Shri Guru Gobind Singhji Institute of Engg. & Tech., Nanded, Maharashtra

02.07.2018

Monday

13

Thiagarajar College of Engineering, Madurai, Tamil Nadu

29.06.2018

Friday

14

TKM College of Engineering, Kollam,Kerala

26.06.2018

Tuesday

15

Veer Surendra Sai University of Technology, Burla

05.07.2018

Thursday

16

Walchand College of Engineering,Vishrambag, Sangli,Maharashtra

03.07.2018

Tuesday

17

Govt. College of Engineering ,Amravati ,Maharashtra

25.06.2018

Monday

18

Govt. College of Engineering ,Aurangabad ,Maharashtra

10.07.2018

Tuesday

19

Indira Gandhi Institute of Technology,Sarang,Odisha

06.07.2018

Friday

20

Sant Longowal Institute of Engineering & Technology,Longowal,Punjab

04.07.2018

Wednesday

21

The National Institute of Engineering, Mysore,Karnataka

22.06.2018

Friday

22

Veermata Jijabai Technological Institute (VJTI), Mumbai,Maharastra

20.06.2018

Wednesday

18.06.2018

Monday

20.06.2018

Wednesday

QIP Centre (Pharmacy)

2

Bharati Vidyapeeth Deemed University, Pune Poona College Of Pharmacy, Erandwane, Pune, Maharashtra Delhi Institute of Pharmaceutical Science & Research (Dipsar), New Delhi

3

Jss College of Pharmacy, Ootacamund, The Nilgiris, Tamilnadu

02.07.2018

Monday

4

Jadavpur University (Pharmacy) Kolkata, West Bengal

04.07.2018

Wednesday

5

Birla Institute of Technology (BIT) Mesra, Ranchi, Jharkhand

06.07.2018

Friday

6

Manipal College Of Pharmaceutical Sciences Manipal University, Madhav Nagar, Manipal, Udupi Dist., Karnataka Mesra, Ranchi, Jharkhand

10.07.2018

Tuesday

1

16

XVI. DEPARTMENTS & FIELDS OF SPECIALIZATION AT VARIOUS INSTITUTIONS 

The departments offering admission to Ph.D. Degree programmes at various institutions and the fields of specialization in the departments are listed in the Tables.



Specializations mentioned indicate only areas of interest and are not exhaustive. There may not be admissions open to all the areas indicated, and candidates, if found suitable, may be admitted to related areas also.

The details given are subject to variation and change from time to time and only those operating in the respective institutions at the time of actual admissions are applicable. Candidates desirous of more information on the matter may write to the individual institution or visit their website.

01.BMS College of Engineering, Bengaluru 560 019 – BS Code

Department

Fields of specialization

Minimum Qualification M. Tech.

BSCE01

Civil Engineering

Structural masonry, New generation concrete, Alternative building materials and technology, Remote sensing and GIS, Water resource management, Pavement material and evaluation, Environmental Engineering, Fracture behavior of concrete, Soil stabilization, Ground improvement techniques

BSEE01


Power engineering, power distribution, Power electronics and drives. Material research on semiconductor devices, solar cells and Nanotechnology.

M. Tech.

M. Tech.

BSME01


Structural dynamics, Tribology, Solid mechanics, Composite materials, Structural health monitoring, Smart materials and structures, Optimization, Nontraditional machining, Design engineering, Powder Metallurgy, Contact Mechanics, Fretting Mechanics, Fatigue of Materials & FEM, Conventional / Unconventional Machining, Advanced Materials Heat Transfer, Heat Pipes, Fluid Mechanics.

Industrial Engineering & Management

ERP and Ergonomics, Quality and reliability, Maintenance engineering, Production process, Facility planning.

M. Tech.

BSIE01

BSEC01

Nonlinear control strategies, Embedded system Design, signal processing, Power electronics, Image Processing and pattern classification. Low power electronics, Wireless Communication, Wireless Sensor Networks, Synthesis and characterization of semiconductor alloys for various applications, Automotive Electronics.

M. Tech.

Electronic & Communicati on Engineering

02.Coimbatore Institute of Technology, Coimbatore 641 014–CC Code

CCCE01

CCME01

Department

Civil Engineering


Fields of specialization Structural Engineering Geotechnical Engineering Water Resources Engineering Environmental Engineering Remote Sensing & GIS Construction Management Welding Technology Advanced Manufacturing Technology Heat Power Engineering Nano materials Energy Engineering Computational Fluid Dynamics

17

Minimum Qualification

M.E./M.Tech. degree in relevant fields of Engineering

CCEE01

CCCH01

Electrical & Electronics Engineering


Power Systems Power Electronics & Drives Control Systems Embedded Systems Analog and Digital Electronics Chemical Engineering Process Control Nano Technology Membrane Technology Environmental Engineering Bio Technology

03.College of Engineering Trivandrum, Thiruvananthapuram 695 016– CT Code CTCE01

CTME01

Department



Civil Engineering

Traffic and Transportation Structural Engineering.


Fluid Mechanics, Heat Transfer, Thermodynamics and Combustion, Computational Fluid Dynamics, Thermal Engineering, Refrigeration and Air conditioning, Energy Management, Alternate Energy Sources and Fuels, Machine Dynamics, Condition Monitoring, Vibration, Fluid Structure Interaction, Smart/Intelligent Structures, Vibration, Machine Design, System Modeling and Simulation, System Dynamics, Optimization Techniques, Operations Management, Supply Chain Management, Financial Engineering, Ergonomics, Tribology, Wear and Lubrication

Engineering,

Geotechnical

Engineering,

CTEE01


Power Systems, Electrical Machines, Control Systems, Guidance & Navigational Control, Power Electronics & Drives.

CTEC01

Electronics & Communicaton Engineering

Radio Frequency Engineering, Signal Processing, VLSI Circuits, Motor Drives, MEMS, Image Processing, Computer Vision, Wireless Communication, Optical Communication.

M.Tech./M.E. degree in relevant field of Engineering

04.College of Engineering, Pune 411 005 – CP Code

Department


CPCE01

Civil Engineering

Construction Management, Geotechnical Engineering, Soil Liquefaction, Pavement Engineering, Ground Improvement, Laboratory and Field, Practices in Foundation Engineering, Soil, Structure Interaction; Structural Engineering, Water Resources Engineering, Town and Country Planning.

CPME01


Heat Transfer, Fluid Mechanics, I C Engines, Solar Energy, Automobile Technology, Refrigeration, air conditioning, energy management. Vibration and Acoustics, Tribology, Industrial Engineering, Micro Machining.

18

Minimum Qualification Master‟s degree in Civil Construction Management, Geotechnical Engineering, Structural Engineering, Water Resources Engineering, Town and Country Planning. Master degree in Mechanical/ Automobile/ Industrial/ Production Engineering and allied specializations.

CPPE01


Non-Traditional Machining, Machining, Machine Tools and Metal Cutting, Micro Machining, Casting, Welding and Forming Processes, Tool Design, Rapid Prototyping and Tooling, Modeling and Simulation of Manufacturing Processes, Manufacturing Automation and Control, Ergonomics, Intelligent Manufacturing, Cellular Manufacturing, Dimensional Tolerance Technology, CAD/CAM, Finite Element Analysis, Features Based Modeling, Computer Aided Process Planning, Intelligent Product Design and Manufacturing CIMS, Product Lifecycle Management, Quality Engineering, Planning, Scheduling, Queuing, Management of Operations, Advanced Manufacturing, Materials Processing and Heat Treatment, Metal Forming, Structural Ceramics Composite Materials, Metal Matrix Composites, Tribology of Advanced materials, Surface Engineering, Magnetic Materials, Electromagnetic Materials and Processing, Ferroelectric Ceramics, Electronics Materials, System Reliability Assessment, Maintenance Management, Machine Diagnostic and Condition Monitoring, Reliability and Design, Reliability Simulation, Machinery Fault Diagnosis, Terotechnology, Maintenance Engineering & Management, Risk and Safety Assessment, Software Reliability, Enterprise Resource Planning (ERP).

Master degree in Production/ Mechanical/ Auto mobile/ Industrial Engineering and allied specializations.

Electrical Machines:- Permanent Magnet Machines, Linear Machines and Special Purpose Machines



Power Electronics:- Topologies, Applications to Drives and Power System (FACTS/HVDC), Power Quality and Super Capacitors. CPEE01  Control System:- Sliding Mode Control, Robust Control and Modeling of Large System.  Power System:- Computation, Economics, Numerical Protection, WAMs, PMUs Technology, SMART Grid, Micro-Grid and Transients Studies. Image Processing and Pattern Recognition, Machine Vision Systems, Next Generation Networks, VLSI Architecture, Development for Signal Processing and Communication Applications, Information Security, Electronic & CPEC01 Using Water Marking, Image Analysis for Medical/Document/ Agro Telecommunication Based Products/ Microstructure/ Metallographic/ Satellite Images, Speech and Audio Processing, Synthesis and Coding. Electrical Engineering

CPCS01

Computer Engineering

CPIN01

Instrumentation and Control

CPMT01

Metallurgy & Materials Science

Computer Networks, Information Security, Formal Methods and Verification, Bioinformatics, Machine Learning, Distributed Computing, Biometric Watermarking, Parallel Computing, Data Mining, Cloud Computing, IT enabled Business Transformations and Software Engineering. Process Control, Biomedical Instrumentation, Control System Power Converters, Agricultural Instrumentation, Sensors/ Transducers, Clinical Diagnosis/ Predictions

Physical Metallurgy, Process Metallurgy, Casting, Welding, Metal Working, Corrosion and Surface Modification, Heat Treatment, Cryogenic Treatment, Power Metallurgy, Ceramics, Polymers, Composite Materials; MMC, Nano Composites, Polymer Based Composites, Iron and Steel Making.

Master‟s degree in Electrical Engineering.

Master‟s degree in Electronics/ Electronics & Telecommunication Engineering.

Master‟s degree in Computer Engineering/ Software Engineering/ Information Technology. Master‟s degree in Instrumentation/ Electrical/ Biomedical/ Electronics/ Computer/ Chemical Engg. Master‟s degree in Metallurgy, Materials Science, Mechanical Production Engineering.

The College of Engineering Pune is affiliated to Pune University. As per the university rules, the candidate seeking admission to Ph.D course has to qualify in the entrance examination of Paper-1 and Paper-II of the University of Pune and then he/she will be eligible for selection through interview for Ph.D admission. However the candidate is exempted from qualifying entrance examination in Paper-I and Paper-II of Pune University if the candidate fulfills the following criteria. (a)Candidates having a GATE score (b)Candidates who are having minimum five years of approved teaching experience

05.Govt. Engineering College, Thrissur 680 009– GK Code

Department


GKCE01

Civil Engineering

Hydraulics & Water resources Engineering, Environmental Engineering.

GKME01


Fracture Mechanics, Structural Mechanics, Computational Mechanics, Finite Element Analysis, Stress Analysis, Manufacturing Technology & Computational Fluid Dynamics

19

Minimum Qualification Masters in Technology / Engineering Degree in the relevant field.

GKEE01


Power Electronics & Drives, Power Quality, Power systems, Energy Management, High Voltage, Image Processing in Biomedical Applications/Control Systems, Soft Computing & Applications,

06.Jadavpur University, Kolkata 700032 – JU Eligibility for candidates of SC/ST/PD to Ph.D degree programme (Engineering./Tech./Arch./Pharm.) of Jadavpur University is at least "Pass Class" marks in Master‟s Degree in Engineering./Tech./Pharm./Arch. or equivalent. Code

Department


JUEE01

Control Systems: Control and guidance, Knowledge-based systems, Artificial Intelligence, Software Engineering, Stochastic Processes, Distributed Computer Control Theory, Motion Control and Power Conditioning.

JUEE02

Electrical Machines: System Optimization, Optimal Design of Electrical Machines, Synchronous Machines Stability, Electrical Drives, Wind Energy.

JUEE03


JUEE04

Power Systems: Computer-Aided Power System Analysis Microprocessor Applications, Power Electronics, Power Systems Protection, Power System Control. Communication Engineering: Digital Communication, Data Compression, Image Processing, Fiber Optic Communication, Analog and Digital Mixed Signal Circuits and Systems. Computer Engineering: Programme Semantics, Compiler, Operating System, Computer Architecture, Artificial Intelligence, Pattern Recognition, Neural Networks

JUEE05

JUEC01

JUEC02 JUEC03

Electronics and

Telecommunic ation JUEC04

Engineering

JUEC05

JUME01

Control Engineering: Digital Control, Robotics, Adaptive and Optimal Control, Fuzzy Control Electronic Devices: Photovoltaic Energy Conversion, Power Semiconductor Devices, Semiconductor Device Modeling, Electrical Conduction and Related Phenomena in Semiconductors and Superconductors, Microelectronics Technology, Nano Crystalline Materials and Devices, EDA, Sensors, MENS, VLSI Circuit Design and Implementation Microwave Engineering: Microwave and Millimeter Wave Antenna Theory and Technique, Microstrip Components, Antennas and Arrays, Electromagnetic Interference and Compatibility, Electrostatic Charging and Discharging.

Heat Power Engineering Mechanical Engineering

Fluid and Hydraulic Engineering (incl. Water Resources)

JUME04


JUME05

Machine Design (including Bioengineering)

JUPE01 JUPE02

Master‟s degree Electrical Engineering

in

Master‟s degree In Electrical & Telecommunication Engineering

Applied Mechanics

JUME02 JUME03

Electrical Measurements: Digital and Microprocessorbased Instrumentation, Biomedical Instrumentation, Digital Signal Processing, Process Instrumentation, Fiber Optic Instrumentation. High Voltage Engineering: High Voltage Laboratory Techniques, Field Analysis and Computation, Discharge Phenomena in Gas, Liquid and Solid and Solid Media, Dielectric Engineering, Surge Analysis.



Production Technology: Machine tools and Metal cutting, Non-tradition machining, Advanced material machining, CAD/CAM, Robotics, Tribology, Computer integrated manufacturing, Flexible automation, Precision engineering, Micro machining, Ergonomics, Designing for production, Manufacturing systems simulation. Production Management: Operations management, Quantitative management, Terotechnology, Reliability, Behavioral science, Enterprise resource planning (ERP), Supply chain management (SCM), Quality engineering, Waste management.

20

Master‟s degree In Mechanical Engineering with at least 60% marks (and also in the preceding degree)

Master‟s degree in any branch of engineering/ technology

07.Madhav Institute of Technology & Science, Gwalior – 474 005 – MG Code

Department



Civil Engineering

Water Resources Engineering; Construction Technology & Management; Structural Engineering; Environmental Engg.

MGEE01


Power systems; Biomedical Signal Processing; Application of AI & Soft Computing Techniques for Electrical Engineering; Condition Based Maintenance of Electrical Machines, Control Engg., Renewable Energy; Nature inspired optimization

MGCS01


Data Mining & Warehousing; Image Processing & Retrieval Techniques; Networking


Vibration & Noise Control; Design Engineering; Maintenance Engineering Tribology; Condition Monitoring; Industrial Engineering; Supply Chain Management; Production Engineering; Material Handling; Non-Conventional Energy System; Solar Energy, Heat Transfer; PV Technology; Green House Technologies; Thermal Engineering

MGCE01

MGME01

MGAR01

Architecture

Environmental Planning; Urban Design; Urban Planning; Energy Systems; Construction Management, Architecture, Interior Environment

M.E./M.Tech. or Equivalent degree in Civil Engineering with at least 60% marks or equivalent grade (55% marks or equivalent grade for SC/ST candidates)

M.E./M.Tech in Electrical Engineering, Instrumentation, Electronics Engg., Electronics and Biomedical Engg. with marks or equivalent grade (55% marks grade for SC/ST candidates)

Electronics & Electrical & at least 60% or equivalent

M.E./M.Tech in Computer Science & Engineering or Information Technology or any other Specialization of Computer Science & Engineering and Information Technology with at least 60% marks or equivalent grade (55% marks or equivalent grade for SC/ST candidates)

M.E./M.Tech. in the relevant discipline with at least 60% marks or equivalent grade (55% marks or equivalent grade for SC/ST candidates).

M.Arch., M.Planning, M.E. or M.Tech. (Civil), (Master in any Architecture related subject) with at least 60% marks or equivalent grade (55% marks or equivalent grade for SC/ST candidates).

08. Netaji Subhas Institute of Technology, New Delhi - 110 078 - NN Code

NNEC01

NNME01 NNIC01

NNMP01 NNBT01

Department



Electronic & Communication Engineering

Will be notified later


Computer Engineering






Manufacturing Process & Automation





Biotechnology

09. Pondicherry Engineering College, Puducherry - 605 014 - PY Code

PYEC01

Department

Electronic & Communication Engineering

Fields of specialization Wireless Communications, Antennas, Electromagnetic Systems, Information and Wireless Security, Signal/Image Processing, Bio-Medical Engineering, Communication Networks, Optical Networks, and Embedded Digital System Design.

21

Minimum Qualification B.E./ B.Tech degree and M.E./ M.Tech degree in ECE/ Electronics/ Communication/ Other related specializations with an overall minimum aggregate of 60% marks (CGPA 6.5)or equivalent in the qualifying examination (M.E./ M.Tech.)

Code

PYCS01

PYEE01

Department


Electrical & Electronics Engineering

Fields of specialization Computer Networks, Software Engineering, Software Architecture, Software Metrics and Testing, Cloud Computing, Service Oriented Architecture and Computing, Database Systems, Data Mining and Warehousing, Language Technology and Ontology, Internet Technology, Distributed Systems, Digital Image Processing , Data Compression, Multimedia Technology, Artificial Intelligence and Fuzzy Logic, Information Security.

B.E./ B.Tech degree in Computer Science and Engineering/ Information Technology/ other related Specializations in Computer/ IT, and M.E./ M.Tech degree in Computer Science and Engineering/ Information Technology/other related Specializations in Computer/ IT, and an overall minimum aggregate of 60% marks (CGPA 6.5) or equivalent in the qualifying examination (M.E./ M.Tech.)

Power systems, power electronics, machines and electro magnetics, signal processing and control, artificial intelligence and digital control /estimation and renewable energy systems.

B.E./ B.Tech degree and M.E./ M.Tech degree in EEE/ Electrical/ other related specializations with an overall minimum aggregate of 60% marks (CGPA 6.5)or equivalent in the qualifying examination (M.E./ M.Tech.)

Thermal Engineering, Design, Manufacturing Technology PYME01



B.E./ B.Tech degree and M.E./ M.Tech degree in Mechanical Engg / Other related specializations with an overall minimum aggregate of 60% marks (CGPA 6.5)or equivalent in the qualifying examination (M.E./ M.Tech.) (a) M.E./M.Tech. degree in Civil Engineering with a minimum of 60% (CGPA 6.5)of marks or equivalent with specialization in: i) Structural Engineering ii) Geotechnical Engineering iii) Hydraulic & water Resource Engineering irrigation Water Management / Ocean Engg. iv) Transportation Engineering

PYCE01

Civil Engineering

Structural Engg., Geotechnical Engineering, Environmental Engineering, Transportation Engineering, Soil Mechanics & Foundation Engineering, Hydraulics & Water Resources Engineering

v) Advanced surveying and Photogrammetry vi) Environmental Engineering / Environmental Technology /Environmental Management / Advanced Construction Technology. vii) Geo informatics viii) Urban Engineering / Town & Country planning ix) Environmental Bio - Technology / BioTechnology / Bio-Chemical Engg./ Industrial Biotechnology

22

10.PSG College of Technology, Coimbatore 641004 - PS Code

PSME01

PSPE01

PSAE01

Department



Automobile Engineering

Fields of specialization Machine Design, Finite Element Analysis, CAD/CAM, Automobile Engineering, Composite materials, Rapid prototyping, Heat Power Engineering, Fluid Power Control & Automation, Energy Engineering, Simulation, Operations Management, Metal Forming, Casting, Welding, Injection Molding, Precision Engineering Tolerance Engineering, Computer Aided Engineering, Smart Systems, Vibration & Noise Engineering, Product Life Cycle Management, Reliability Engineering, Machine Tool Design, Safety Engineering, Innovation & Creativity, Value Engineering, Concurrent Engineering, Pneumatics, Manufacturing, Instrumentation, DFMA, TPM, Tribology, Ergonomics & Industrial Design, Refrigeration & Air Conditioning, Nano Technology. CAD/CAM, Laser Material Processing, Fluid Power Control and Automation, Industrial Engineering, Value Engineering, Systems Engineering, Total Quality Management, Agile Manufacturing, Innovative Management , Metal Forming, Concurrent Engineering, Manufacturing Systems Analysis, Virtual Manufacturing, Lean Manufacturing, Precision Manufacturing, Product Data Management, Product Life Cycle Management, Product Development, Metal Casting Injection Molding, Tool Design (Jigs & Fixtures), Welding. Management, Metal Forming, Concurrent Engineering, Manufacturing, Systems Analysis, Virtual Manufacturing, Lean Manufacturing, Precision Manufacturing, Product Data Management, Product Life Cycle Management, Product Development, Product Reliability, Metal Casting, Injection Moulding, Tool Design (Jigs & Fixtures), Welding.

Minimum Qualification A Master's degree in Mechanical Engineering/ Production Engineering

A Master‟s degree in Mechanical Engineering / Production Engineering.

A Master‟s degree in Automobile Engine Manufacturing System, Alternate fuels / Fuel Cells, Automotive materials, Solar Engineering / Power Vehicles, Electric and Hybrid Vehicles, Automotive Acoustics, Product Life Cycle Mechanical Management , IC Engines Engineering / Production Engineering.

PSEC01

A Master‟s degree in any of the following specializations: Communication Systems, Wireless RF and Microwave antennas, RF MEMS, Wireless Communication, Image Processing, Communication, Electronics and Signal Processing, Speech signal Processing, VLSI Design, Networking, Wireless Sensor Applied Electronics, Communication Networks Communication, Nano Technology and related domain, Embedded Systems, Electrical Machines, Engineering Wireless Security Power Electronics & Drives, Embedded and Real Time systems, Computer Science and Engiineering, Nanotechnology

PSBT01

Human Genetics, Neuroscience, Cancer and Computation biology, Plant Molecular Biology A Master‟s Degree and Biotechnology, Bio Process and Molecular Biology, Clinical Biotechnology & Biotechnology (M.Tech or M.Sc) in Microbiology, Environmental biotechnology, Plant Biotechnology, Biofuels and Biomass the relevant field Energy

23

11.Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam (Kerala) - 686 501 - RG Code RGEE01

RGME01

Department Electrical Engineering Mechanical Engineering

RGCE01 Civil Engineering



Power and Renewable Energy System, Industrial Drives, Control Engg. ----------

As per APJ. Abdul Kalam Technological University , Trivandrum Norms.

Transformation Engg, Structural Engg,. Geotechnical Engg., Water Resource Engg.

12. Shri Guru Govind Singh Institute of Engineering & Technology, Nanded 431 606 – SG

Code

SGEC01

SGEC02

SGEC03

Department


Minimum Qualification Masters degree in Hydraulics/ Water Management/ Water Resources/ Environment Engineering/ GIS or equivalent degree with minimum 55% or equivalent CGPA.

VLSI and Embedded Systems


Signal Processing: Speech, Biomedical Signals


Image and Video Processing

M.E./M.Tech degree in relevant discipline with minimum 55% marks or equivalent CGPA.

Pattern Recognition


SGEC04


Measurement and Instrumentation: Industrial Instrumentation, Process Instrumentation and Control, Recent trends and Applications in Measurement and Instrumentation, Intelligent Instrumentation, Biomedical Instrumentation and Applications, Biomedical Signal Processing and Applications Advanced Sensors and MEMS Devices.

SGIN01


SGIN02


Control System: Linear System Theory, Nonlinear Systems, Process Identification and Control, Robust and optimal control, sliding Mode control and Applications, Adaptive Control Computer Controlled Systems including Process Control, Large Scale System Modeling and Control, Nuclear Reactor Control, Neural and Fuzzy based Control, Intelligent Control, and Evolutionary Approaches for Control System

24

ME/M.Tech or Equivalent degree in Instrumentation, Instrumentation & Control, Electrical Engineering, Electronics, Electronics & Telecommunication, Electronics & Instrumentation, Electrical & Electronics Engineering, Biomedical Instrumentation with minimum 55% marks or equivalent CGPA.

Digital Signal and Image Processing: Signal Processing, Speech Processing, Speaker Identification and Recognition, Image Processing and Computer Vision, Biometrics and Applications, Wavelets and Applications in Real Time Processing of Signals.

SGIN03

M.E./M.Tech. degree in Production, Mechanical or equivalent with minimum 55% marks or equivalent CGPA.

SGPE01

Micro-Manufacturing

SGPE02

Advanced Manufacturing Technologies

SGPE03

Modeling and Analysis of Manufacturing Processes: Machining, Casting, Welding and Metal Forming. Production Engineering

CAE for Composites

M.E./M.Tech. degree in Production, Mechanical or with minimum 55% marks or equivalent CGPA.

SGPE05

Robust Design and Simulation Analysis for Products and Processes


SGPE06

Production/ Operations Management and PLM

SGPE07

Tool Condition Monitoring

SGPE04


SGCE01 Hydraulics and / Water Resources Engineering

Master‟s degree in Hydraulics and / or Water Resources / Environmental Engineering or equivalent degree with minimum 55% marks or equivalent CGPA.

Environmental Engineering

Master‟s degree in Hydraulics and / or Water Resources / Environmental Engineering or equivalent with minimum 55% marks or equivalent CGPA.

SGCE02 Civil Engineering SGCE03

Master‟s degree in Hydraulics and / or Water Resources / Environmental Engineering or equivalent degree with minimum 55% marks or equivalent CGPA.

Geotechnical Engineering

SGCE04

Structural Engineering Micro Manufacturing

SGME01 SGME02

Advanced Manufacturing Technologies

SGME03

Tribological Characterization

SGME04

Quality and Reliability

SGME05


M.E./ M.Tech. degree in Mechanical / Production Engineering or equivalent with minimum 55% marks or equivalent CGPA.

Production and Operation Management

SGME06

Manufacturing Process Modeling and Analysis: Machining, Casting, Welding and Metal Forming

SGME07

Thermo-Structural Composites

Analysis,

Design

25

and

Analysis

of

13. Thiagarajar College of Engineering, Madurai 625 015 – TM Code TMCE01

TMEE01

TMME01

TMEC01

TMCS01

Department Civil Engineering







Structural Engineering, Environmental Engineering, Hydrology and Water Resources Management, Geotechnical Engineering, Transportation Engineering, Pollution control, Construction materials, Repair & Rehabilitation. Power Systems, Soft computing, Renewable Energy Resources, Energy Conservation and Management, Power Electronics and Drives, Electrical Machines, Optimisation Techniques, Smart Grid, Distributed Generation Systems, Special Machines, Control Systems, FACTS devices and controllers, AI and Expert Systems Applications.

As per the affiliating University norms. 



M.E./ M.Tech. /M.S. (By Research) in the relevant branch of Engineering & Technology and a minimum of 55% marks or CGPA of 5.5 on a ten point scale in the qualifying exam (50% marks or CGPA of 5.0 on a ten point scale for SC/ST candidates)

Thermal Engineering, Computational Fluid Dynamics, Design Engineering, Composite Materials, Automation, CAD/CAM, CIM, Machine Vision, Mechatronics, Rapid Prototyping, Quality Engineering, Reliability Engineering, Industrial Engineering, Manufacturing Management, Logistics and Supply Chain Management, Lean/Agile Manufacturing, Robotics, Micro channel cooling. Wireless Communication, Digital Signal Processing, RF Circuits and Systems, Antennas., RFMEMS, Image Processing, Remote Sensing and GIS, VLSI Design, Embedded Systems, Sensors and Instrumentation, Wireless Networks, Medical Electronics, Optical Communication Network Security, Data Mining, Artificial Intelligence, Multicore Architecture, Parallel Processing, Computer Networks, Knowledge Engineering, Machine Learning, Software Testing, Software Quality and Reliability, Grid Computing, Internet Technology, Compliers, Multimedia, Computer Vision, Biometrics, Multimedia and Graphics, Computer Algorithms.

14.TKM College of Engineering, Kollam (Kerala) - 691 005 - TK Code

TKCE01

TKME01

Department Civil Engineering


Fields of specialization Structural Engineering, Offshore structures, Engineering, Environmental Engineering

Minimum Qualification Traffic Master‟s degree in Civil Engineering with First division or equivalent

Thermal management of electronic systems, nanomaterials and nanofluids, super conductivity, cryogenicheat transfer, heat and mass transfer in multiphase and single phase systems, food preservation, cryocoolers for space applications, Computational Fluid Dynamics (CFD), computational combustion, fracture mechanics, micro structural studies, biomechanics, rapid prototyping

26

Master‟s degree in Mechanical Engineering with First division or equivalent

15. Veer Surendra Sai University of Technology, Burla – VB Code

Department


VBCE01

Civil Engineering

Geotechnical Engineering, Structural Engineering, Water Resources Engineering, Environmental Engineering, Transportation Engineering.

VBEE01


Power System Engineering, Power Electronics & Drives, Control System Engineering, Renewable Energy Resources

VBEC01


Signal Processing, Image Processing, Electromagnetics & Microstrip Antenna, Computational Intelligence, VLSI, Wireless Communication..

VBME01


Machine Design & Analysis, Production Engineering, Thermal Engineering.

VBPE01


Robotics, Non-Traditional Machining, Manufacturing Systems, Advance Casting, Advance Welding, FMS, CIM, CAD/CAM, RP Operation Management.


M.E./M.Tech with minimum of 6.75 CGPA in 10 point scale (or 60% or more in aggregate) in Master‟s level and minimum of 6.75 CGPA (or 60% mark in aggregate) at the Bachelor‟s level.

16. Walchand College of Engineering, Sangli 416 415 – WS Code

WSCE01

Department

Civil Engineering

Fields of specialization Civil – Environmental Engineering: Water and Wastewater Treatment, Modeling of Environmental Systems, Solid Waste Management, Air Pollution, Constructed Wetlands, Civil Building Technology: Structural masonry and materials, Construction project management, Energy Efficiency in Building, Passive design in building performance. Civil Structural Engineering: Earthquake Engineering, Finite Element Analysis, Structural dynamics, Concrete technology, Structural Engineering.

WSME01


Heat Power, Thermal Engineering, Cryogenics, Production Engineering Mechatronics, Micromachining, Manufacturing, Design Engineering, Condition Monitoring, Industrial Engineering.

WSEE01


High Voltage (HV) Engineering, Power Systems, Electrical Machines, Power Electronics, Drives, Power Quality, Analysis, Operation, Protection.

WSEC01


Signal Processing, Communication Engineering, VLSI Design, Image Processing, Electronic System Design, Control Systems, Communication Engineering, Electronic System Design, Image Processing Mobile Communication, Sensor Networks, Image Processing..

WSCS01


Artificial Intelligence, Pattern Recognition, Databases, Data Mining, Networking, Image Processing, Information Security, High Performance Computing, Cloud Computing..

27


As per Shivaji University Kolhapur Norms

17.Government College of Engineering, Amravati (Maharashtra) - 444 604 - AM Code

AMEE01

AMME01

Department





Power System Operation and Control, Power System Protection and Stability, Deregulation, Electrical Network, Congestion Management, FACTs and Power re-routing, Application of Optimization and AI Techniques to Power System, Power Electronics, Distributed Generation

ME/M.Tech or equivalent degree in relevant branch And As per the affiliating University norms. i.e Sant Gadge Baba Amravati University

Thermal Engineering, Production Engineering


Geotechnical Engineering: Foundations, Earth and Earth Retaining Structures, Ground Improvement Techniques, Geo-environment Engineering, Earthquake Geotechnical Engineering

AMCE01

Civil Engineering

Water resources and Environment Engineering: Open Channel Flows, Urban Water Distribution Systems, Environmental Hydraulics, Water Quality Modeling, Hydraulics, Water Quality Modeling, Hydraulic Structures


Structure Engineering: Structure Mechanics, FEM Techniques, RC and Pre-stressed concrete, Masonry Structures, Structure Dynamics, Non-Linear and Stochastic Dynamical Systems, Earthquake Engineering, Structural safety, Fracture Mechanics of Concrete, Materials in Civil Engineering, Structural Health Monitoring

18.Govt. College of Engineering, Aurangabad 431 005 – GA Code

Department

GACE01

Civil Engineering

GAEE01


GAEC01

Electronics & Telecommunication Engineering

Fields of specialization Water Resources Engineering, Environmental Engineering, Structural Engineering.

Minimum Qualification M.E/M.Tech Degree of the recognized University in Civil Engineering/ Environmental Engineering/ Water Resource Management, Structural Engineering. M.E/M.Tech Degree of the recognized University in Electrical/Electrical (Electronics & Power)/ Electronics & Power/ Electronics/ Instrumentation and allied branches of Engineering and Technology.

Power Systems, Control System

M.E/M.Tech Degree of the recognized University in Electronics/ Electronics and Telecommunication / Electronics and Telecommunication/Computer Engineering/ Computer Technology / Computer Science and Technology / Computer Science/ industrial Electronics/ Electronics Product Design Technology/Power Electronics / Instrumentation/ Information Technology.

Signal and Image Processing, Communication Engineering

19.Indira Gandhi Institute of Technology, Sarang, (Odisha) - 759 146 - IO Code

Department

IOCE01

Civil Engineering

IOME01


IOEE01


Fields of specialization Structural Engineering, Geotechnical Engineering, Transportation Engineering

Machine Design, Production Engineering, Thermal Engineering M/c Drives & Power Electronics Power Systems Engineering, Signal & Image Processing

28

Minimum Qualification First Division or 60% marks in B. Tech in Civil Engineering & M. Tech. in relevant field.

First Division or 60% marks in B. Tech in Mechanical Engineering & M. Tech. in relevant field. First Division or 60% marks in B. Tech in Electrical Engg OR in Electrical & Electronics Engineering (EEE) & M. Tech. in relevant field.

20. Sant Longowal Institute of Engineering & Technology (Deemed University), Punjab - 148 106 - SP Code

SPME01

SPFE01

SPIE01

SPCT01

Department


Food Engineering Technology

Electronics & Instrumentation Engineering

Chemical Technology

Fields of specialization Industrial & Production Engineering (Quality & reliability Engineering; Supply Chain Management, TPM, TQM) Thermal Engineering Non-Conventional Machining, Hybrid Machining Process Welding Engineering Agri-Waste Management Simulation Vibration, Precision Metrology Metal Machining / cutting Product Design Management Automobile Engineering Composite & Advanced Materials Food Engineering, Food Processing & Preservation, Food Process Engineering, Food Processing Technology, Food Technology, Agricultural & Food Engineering, Food Science and Technology, Food Science or relevant field Biomedical Engineering Control Engineering Electrical Engineering Electrical Engineering (Power) Electrical Power Engineering Electronics Engineering Instrumentation & Control Engineering Instrumentation Engineering Instrumentation Technology Power Electronics Biomedical Instrumentation Control & Instrumentation Control System Engineering Instrument Technology Instrumentation & Process Control Medical Electronics Engineering Medical Instrumentation Medical Electronics

Biomass and Bioenergy Conventional and Non-conventional Energy Sources Environmental Engineering Industrial Pollution Control Hydrogen Energy Biorefineries (Energy and Biomaterials) Biomaterials Controlled Drug Delivery Waste Water Treatment using polymeric Materials Energy Conservation Polymer Engineering Modelling Simulation and Optimization Polymer Composites

29


M.Tech.

M.Sc. / M.Tech.

M.E. / M.Tech or equivalent

1.(a) Candidate should have B.E./B.Tech. or equivalent in Chemical Engineering / Chemical Technology / Chemical Engineering (Plastic & Polymer) / Chemical & Polymer Engineering, Chemical & Alcohol Technology / Chemical & Bio-Engineering or equivalent (b) The candidate must have secured at least 55% marks (50% for reserved categories) – aggregate in B.E. / B.Tech.

2. Candidate must have M.E. / M.Tech. in Chemical & allied fields with 60% marks (55% for reserved categories).

21. The National Institute of Engineering, Mysore 570 008 – NM Code

Department

NMCE01 Civil Engineering

Field of Specialization

Structural Engineering, Geotechnical Engineering, Water Resources Engineering, Transportation Engineering, Remote sensing and GIS,

NMEE01

NMIP01

NMCS01


Power system distribution, Voltage stability, Power system dynamics, FACTS, Distributed generation, SMARTGRID, Artificial Intelligence applications.

Industrial & Production Engineering

Operations Management, Technology enabled education, Metal cutting, Industrial engineering and management, Manufacturing, Mechanical and wear characterization of advanced composites


Data mining, Cloud computing, Network security, Big data analysis and related fields.


M.E/M.Tech in Civil Engineering with at least 60% marks or equivalent grade B.E./B.Tech in Electrical Engineering with 60% marks (aggregate of all years/ semesters), M.E./M.Tech in Electrical Engineering with at least 70% aggregate marks or equivalent grade M.E./M.Tech in Mechanical/ Production/ Management and related branch with at least 60% marks ordegree equivalent grade. Engineering M.EMaster‟s in Electrical M.E./M.Tech in Computer Science & Engineering/ Information Science & Engineering with a minimum of 75% marks or equivalent grade from UGC recognized universities.

22.Veermata Jijabai Technological Institute (VJTI), Mumbai (Maharashtra) - 400019 - VM Code

Department

Fields of specialization Civil Engineering, Structural Engineering, Environmental Engineering, Construction Management, Construction Engineering, Earthquake Engineering, Transportation Engineering, Geospatial Technology, Remote Sensing, Geotechnical Engineering, Foundation Engineering, Geotechnical earthquake engineering, Water resource management, Civil Technology, Construction Engineering & Management, Construction Technology, Construction Technology & Management, Environmental Management, Environmental Science &Engineering, Environmental Science & Technology, Water & Environmental Technology, Civil and Water Management Engineering, Building Construction & Technology, Infrastructure Engineering

VMCE01

Civil Engineering

VMEE01


High Voltage, Partial Discharge, control system, Power System Stability, Smart Grid, Dynamic & Control, Renewable Energy


Design, Vibration, Tribology, FEA, Mechatronics, CAD/CAM, Robotics, Solar Energy, Energy Management, Thermodynamics, Microfluidics, Thermal and Fluid Engg., Computational Fluid Dynamics, Refrigeration and Air conditioning, Material science, Manufacturing Engg., Nanotechnology, Composites, etc.

VMME01

VMEC01

VMTX01


Textile Technology

Minimum Qualification M.E./M.Tech. in Civil Engineering or allied areas consistent with field of specialization

M.E/M.Tech.(Electrical Engineering) or allied areas consistent with field of specialization

M.E./M.Tech.(Mechanical Engineering) or allied areas consistent with field of specialization

M.E./M.Tech,(Electronics Engineering/ Biomedical Signal Processing, Computer Architecture, Virtual Electronics & Telecommunication Instrumentation, Smart Grid, Dynamics & Control, Computer Engineering) or allied areas consistent with Communication, Wireless Communication, Sensor Networks field of specialization Textile Technology, Textile Engineering, Fibre Science & Technology, Textile Chemistry

30

M.E./M.Tech.

QIP Centre (Pharmacy)

.

1 Bharati Vidyapeeth Deemed University, Pune Poona College Of Pharmacy, Erandwane, Pune, Maharashtra- PC Code

Department


Pharmacokinetic and Pharmacodynamic studies. PCPC01 Pharmaceutics Crystal engineering and Particle engineering Pharmacognosy, Natural Products, Herbal Drug PCPS01 Pharmacognosy Technology, Herbal formulation, Medicinal Plant Biotechnology PCPM01 Pharmacology Inflammation, neurodegenerative disesases, Metabolic Pharmaceutical diseases, Cardiovascular and Diabetes mellitus PCPH01 chemistry Analytical method development and Validation. Quality Assurance Natrual product reserch. Qualitative, quantitative analysis of PCPQ01 Techniques herbal products. Synthetic /Medicinal Chemistry, Pharmaceutical Analysis. PCPB01 Biotechnology Analytical method development and Validation. PCPP01 Pharmacy practices Application of Quality by Design (QbD) in drug development. Qualitative, quantitative analysis of drug product. Nutraceuticals, Osteoarthritis, Diabetes "1. Therapeautic drug monitoring of antituberculars and 2.Delhi Institute of Pharmaceutical Science &antiepileptic Research (Dipsar) PushpVihar, drugs: 2. Genomic study of antitubercular drugs resistance New Delhi - DI 3. Therapeutic Drug Monitoring of cytotoxis drugs " Code Department Fields of specialization DIPH01

Pharmaceutical Chemistry

DIPM01

Pharmacology

DIPC01

Pharmaceutics

Drug design, synthesis and pharmacological evaluation of fatty acid derivatives, oxadiazole and benzoxazole derivatives,Drug design, synthetic and phytochemistry, Quality Assurance & Qualitiy Control.


M.Pharm

Sector-III, M.B. Road, Minimum Qualification

M.Pharm

Plant Cell Culture, Drug design, synthetic and

3.JSS College of Pharmacy Postphytochemistry, Box No. 20,Quality Rocklands, Ootacamund-643001, The Nilgiris, Tamilnadu -JS Assurance & Qualitiy Control Code

Department

JSPC01

Pharmaceutics

JSPH01


JSPS01

Phamacognosy

JSPM01 JSPA01 JSPB01 JSPP01

Pharmacology Pharmaceutical Analysis Pharmaceutical Biotechnology

Fields specialization Evaluation of Drugs forofCancer, Metabolic Syndrome, Diabetes and its complications (Retinopathy Nephropathy) Cardiomyopathy, Catract & Glucoma, Cell Cultre and its Molecular Mechanisms. Nanotechnology, Herbal Formulation, Customized Drug Delivery, · Oral/ Sustained release formulations · Lipid based drug delivery systems · Multi-particulated drug delivery systems · Scaffolds for diabetic foot ulcer


M.Pharm

Pharmacy Practice

4.Jadavpur University (Pharmacy) Kolkata, West Bangal - JV Code

Department

JVPH01


JVPC01

Pharmaceutics

JVPM01

Pharmacology

JVPS01

Phamacognosy

JVPB01

Pharmaceutical Biotechnology

Fields of specialization Drug Delivery and Drug Targeting. Pharmaceutical Formulation Designing. Probiotic Delivery Herbal Drug Research, Synthesis & Natural Product Research on Anticancer & antdiabetic Drugs. Pharmaceutical Chemistry, Pharmaceutical Technology (Natural Product Studies). Pharmacology & Toxicology

31


M.Pharm

5.Birla Institute Of Technology (Bit) Mesra, Ranchi, Jharkhand - BI Code

Department

BIPC01

Pharmaceutics

BIPH01


BIPS01

Phamacognosy

BIPM01

Pharmacology

BIPQ01

Pharmaceutical Quality Assurance



Pharmacokinetic and Pharmacodynamic studies. Crystal engineering and Particle engineering

M.Pharm Pharmacognosy, Natural Products, Herbal Drug Technology, Herbal formulation, Medicinal Plant Biotechnology

6.Manipal College Of Pharmaceutical Sciences Manipal University, Madhav Nagar, Manipal, Udupi Dist., Karnataka - MC Code MCPC01 MCPH01 MCPS01 MCPM01 MCPT01 MCPB01 MCPP01

MCPQ01

Department


Pharmaceutics

Drug Discovery Anti cancer drug discovery Molecular Docking Synthesis and biological screening of activity - anticancer, Anti TB Drug design & synthesis of molecules of molecules for anti cancer studies Drug design and synthesis Drug testing and analysis Drug desing and synthesis and Anticancer and Anti diabetic studies Pharmacology, wound healing, diabetics and oncology Cancer biology metabolic disorder Anticancer and Neutoprotective(chemobrain) Wound healing. Pharmacokinetic study in animals Redox signoling Metabolitic disorders, Inflammation Biology Neuro inflammation and Diabetics Pharmacology of neurodegenerative disorders Cancer biology and mood disorders Formulation development

Pharmaceutical Chemistry Phamacognosy Pharmacology Pharmacy Management Pharmaceutical Biotechnology Pharmacy Practice


32


M.Pharm

Department Supervisor details and vacancies available 1.BMS COLLEGE OF ENGINEERING, Bengaluru - BS Name & AICTE ID of the Institute

NIRF Ranking if any

QIP approved in the department

Department wise Ph.D supervisors

Remarks area/ specialization

Major research facilities in the department

Environmental Engg Lab:

Maya Naik (05)

B.M.S COLEGE OF ENGINEERING

Environmental Engg

1. Double Beam UV spectrometer 2.Atomic absorption spectrometer 3. BOD measuring system 4. BOD incubator 5. COD reactor apparatus 6. LDO Intelical probe 7. Electronic balance 8.Auto clave 9.Laminor flow chamber 10.Membrane filter assembly 11.Fine particle sampler 12. All quart double distiller CONCRETE LAB:

CIVIL ENGINEERING

067 1-5884543

Ravishankar B V (04)

33

Environmental Engg

1. universal testing machine - capacity 60 kn. 2. Diamond Drilling Core Cutter With Drill Bits And Accessories. 3. range meter with accessories 4. Demountable Mechanical Strain Gauges 5.SONY Handy Camp 6. Digital Dial Gauges 7. Load Cell Proving Rings 8.Loading Frame 200 Tonne 9.Permeability Apparatus, 10.Concrete Mixer Pan Type. 11. Hydraulic Jack With Power Pack- 2 Nos. 12.Core Bits 13.Portable Dynamic Signal Analyser 14.Direct Shear Apparatus.

15.Strain Indicator

Raghunath S (6)

Construction Technology

Prasanna Kumar P (2)

Structures

Suresh Ramaswwamy Reddy (3)

Water Resources

Girish S (4)

Structural Engg

Muralidhara S (3)

Industrial Structures

SurekaNaagesh (3)

Geotechnical Engg

Srinivasa R L (2)

Structures

Sampath Kumar M C (6)

Environmental Engg

Nagaraj H B (2)

Geotechnical Engg

Ganesh K(2)

Geotechnical Engg

KrishnappaOlekar (1)

Applied Geology

Ranganath R V (1)


MangalaKeshava(4)


Arun Kumar A S (5)


34

Highway lab: 1. TransCad Software 2. Ring Ball Apparatus 3.C B R Apparatus 4. Planning Software 5.Standard Penetrometer 6. Ductility Testing Machine 7. Flash & Fire Point Apparatus 8. Water Bath 9.Thin Film Hot Air Oven

Hydraulics lab: 1. Hydrostatic Static Bench 2.Laminar flow and turbulent flow apparatus 3. Bernoulli‟s Apparatus 4. HELE-SHAW Apparatus

Survey Lab 1. Planimeter, 2. Total Station 3.Auto level Theodolite Total Station-R-425NM 5.GPS Accessories to Total station 6.Total station

CAD Lab

4.

UdayaSimha L (1)

Hydraulics

Ramakrishnaiah C R (4)

Environmental Engg Highway Engineering

Jagadeesh H S (05)

Sakeyshamu -

Structures

Dr.C.Lakshminarayana (3)

Power Systems Engineering

Dr.Ravishankar Deekshit (3)

Power Systems Engineering Power Electronics and

Dr.L.Venkatesha (3) Drives Power Quality, Technologies for Dr.P.Meena (3) B.M.S COLEGE OF ENGINEERING

Electrical& Electronics Engineering 067

1-5884543

Integration of

Centre of Excellence in Solar Photovoltaic systems  Phase Change Memory Materials Lab is established under Centre of Excellence  PG and Research Lab  Computer Lab  Circuits, Measurements and Controls Lab  Electrical machines Lab I and II  Relay and High Voltage Lab Major equipment available in the Labs:

Energy monitoring.

           

Nanotechnology High Voltage Engineering and Liquid Insulation

35





Dr..A.Usha(3)

Dr.K.Padmavathi (4)

Laboratory Facilities:

renewables to the grid,

Smart Sensors and

Dr.V.Champa (5)

1. HP LaserJet P 1020 Plus Printer 2. HP Compaq Desktop 6200 MT Pro 3. HP LaserJet P 1020 Plus Printer 4. 2,00 TR Vertis High Wall Split AC Voltas 5. HP Compaq Desktop 8000 Elite 6. UPS System 7.5KVA 7. HP Desktop DC7800

Power Electronics &

Refrigeration facility (Samsung fridge with stand) Diaphragm pump Valido 60 DX chimney Probe stations 15kVA UPS 12V, 100Ah battery DC Servomotor with control Isolation transformer 1kVA 100kHz, 100A AC DC current probe 30 MHz Oscilloscope 70MHz Dual channel DSO Fluke Power Quality analyzer Equipments for smart class room

Renewable Energy High Voltage Engineering and Dr.A.N.Nagashree (5) Liquid Insulation Diagnostics Power Quality Improvement and Dr.S.Pradeepa (3) Applications of Power Converters. HVDC transmission Dr.R.S.Geetha (5) systems

Amorphous Dr Chandashree Das (3) semiconductors

36

                                 

(camera and accessories) IGBT based BLDC motor drives PV simulator RPS for PE lab Single phase auto transformer Signal generators MyDACMYRio Bridges (Maxwell, DeSauty, etc.) DC Servomotor with control Isolation transformer 1kVA 100kHz, 100A AC DC current probe 30 MHz Oscilloscope 70MHz Dual channel DSO Fluke Power Quality analyzer IGBT based BLDC motor drives Firing Modules PV simulator RPS for PE lab Single phase auto transformer Signal generators MyDACMYRio Bridges (Maxwell, DeSauty, etc.) Analytical balance and density kit. DSO with HV differential probes. 6.5kVA, 120V UPS along with battery. High temperature tubular furnace Source meter Fluke higher end multimeters and clamp meters 12V, 100AH tubular battery I7,I5, Quad core processor MATLAB: 2017b XILINX PSCAD: version X4 MDO, current probes, HV probes Dual sputtering unit

Dr. Poornima .G(3)

Digital Communications & Wireless Sensor Networks

WAVEGURU-RF&WIRELESS SDR PLATFORM

Dr. A. Meera(3)

Pattern Recognition & Image Processing

N9310A RF SIGNAL GENERATOR (VGST)

Dr. B.S. Nagabhushana(1)

B.M.S COLEGE OF ENGINEERING

1-5884543

067


Automotive Embedded Systems

MS07012B MIXED SIGNAL OSCILLOSCOPE (VGST) ARBITRARY WAVEFORM GENERATOR(VGST)

Dr. H.R. Bhagyalakshmi(3) 3 (* Retiring in 2019

Reversible Logic & Low Power VLSI

Dr. Jayanthi K Murthy(2)

Wireless Sensor Networks

Dr. Vasundhara Patel K.S.(1)

Multivalued Digital Logic Design

Dr. K.P. Lakshmi(3)

Instrumentation and Applied Physics

Dr. K.R. Sudhindra(1)

Digital Communication & DSP

Dr. R. Jayagowri(2)

VLSI- Design for Testability

Dr. Kiran Bailey(2)

Low Power CMOS Devices

Dr.K.Narasimha Rao (EI Dept)(2)

Process Control & Power Electronics

Dr.Mamatha MN (EI Dept.)(2)

Bio Medical and Data Acquisition

ARBITRARY WAVEFORM GENERATOR(PG) N9010A EXA SIGNAL ANALYZER 10HZ TO 7GHZ N5172B -EXGX SERIES RF VECTOR SIGNAL GENERATOR ISENSE SENSORS AND ACCESSORIES ISENSE NUTRIENT SYSTEM EMI/EMC MEASUREMENT PROBES AND ACCESSORIES Synopsys TCAD University Bundle

37

Cadence University Bundle Orcad Solid thinking compose 2017.V paidup

Dr H N Suma(2) (ML Electronics)

Image Processing & Pattern Recognition

Dr. Vijayalakshmi (ML Electronics)

Bio Medical Signal Processing

Dr K. J.Rathanraj No. of Seats available=04

Dr. B.Ravishankar No. of Seats available=06 BMS College of Engineering

67

Industrial Engineering and Management

I-5884543

Dr. K. N. P. Prasad No. of Seats available=08 Dr. G. Shashikumar No. of Seats available=08

Dr. B .R .Ramji No. of Seats available=06

067 B.M.S COLEGE OF


Dr. Bheemsha Dr. RudraNaik

38

(3) (3)

license 6.1(Research licence) ADS EMPro EXATA MATLABR2016A Labview ,ANSYS

Reliability Engineering, Quality Product Design and Development Production and Maintenance Engineering

Qualnet SystemVue

Trust Bearing Equipment, Input Analyzer, CNC Robotics

Enterprise Resource Planning Ergonomics Supply Chain Management Composite Materials Production Engineering Facility Planning and Design Plant Layout and Design.

Production –Machining Composite materials

Manufacturing Science



Production& Thermal



DUCOM-Semi active Journal bearing test rig with instrument Control Freak Mini Bench Top NC Lathe Machine

ENGINEERING

1-5884543

Dr. K.Guruprasad (3)

Production

  

Dr. H.K.Rangavittal (3)

Machine Design



Dr.L.Ravikumar

Machine Design

Dr. S.M Suresh

(2)

(2)

Dr.Tataram K Chavan (5)

Advance Manufacturing

Production

   

Dr.B.S.Suresh

(3)

Machine Design Production

Dr.M.Ramachandra (2) Dr.J.Sharanabasavaraja

  

Machine Design 

(1) Machine Design Dr. M.G.Patil (4) Production Dr. B.N. Sarada (3) Production

Dr. V S Mudakappanavar (4) Dr. Shivashankar R

Machine Design

Srivatsa (3) Materials Dr. Anil Chandra A R (5) Machine Design Dr. Santosha D

(5)

Dr. Sathisha H.M

(4)

Thermal

39

 

Wind Energy Training Systems Solar Concentrator Training System Blower Type Tunnel & Suction Type Tunnel 32 Channel Electronic pressure scanner with transducer outputs for Lab View Data Acquisition system KAPLAN Turbine Test Rig CSM MSC NASTRAN (3 users) & UGNX CAD/CAM Bundle AUTO DESK Inventor Professional 10 EDUCAD & Solid edge ST4 (90 license) Software from VTU PRO-E (50 User) Plus License EDU Upgrading 5 users of Ansys ver.11.0 MSC-NASTRAN, PATRAN, DYTRAN, SIND & MARC, ADMS (150 licenses), Up-gradation of SOLID EDGE Software: SE STS Academic Perpetual License - 90 users perpetual license Vibration Analysis software package LABVIEW MCI-Air-cooled frame magnet

2. COIMBATORE INSTITUE OF TECHNOLOGY, COIMBATORE - CC DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING LIST OF PH.D CANDIDATES REGISTERED UNDER EEE RECOGNIZED SUPERVISORS PhD ONGOING S.NO

SUPERVISOR

1.

Dr.S.VASANTHARATHNA

Specialization

No. Of seats available

EEE -

11

10

1

8

--

3

8

6

2

3

5

Power Systems PROFESSOR

EEE 2.

Dr.V.MANIKANDAN Analog Circuits PROFESSOR Dr.M.SUNDARAMBAL

3.

PROFESSOR (TO BE RETIRED IN MAY 2018)

EEE Computer Networks

Dr.E.CHANDIRA SEKARAN

EEE

PROFESSOR

Power Electronics

4.

Dr.S.SUJA EEE 5.

ASSOCIATE PROFESSOR Power Systems

6.

Dr. J. DEVI SHREE

EEE

40

:

ASSOCIATE PROFESSOR

Power Systems

Dr.A.KAVITHAMANI

EEE

7.

3

2

1

4

Analog Circuits Dr. S. ELANGO EEE 8.

ASSISTANT PROFESSOR Power Electronics

DEPARTMENT OF CHEMICAL ENGINEERING PhD Sl. NO

SUPERVISOR

Specialization ON GOING

No. Of seats available

1

Dr. M. Thirumarimurugan

Heat Transfer, Process Modelling and Simulation

7

4

2

Dr. D. Prabhakaran


7

1

3

Dr. V.M. Sivakumar

Nano Catalysis

9

--

4

Dr.R. Azarudeen

Polymer Chemistry, Material Science

2

3

41

DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING

S.No

Name of the guide

Specialization

Phd Ongoing

Total Number of Vacancy

1

Dr.G.Kousalya

Distributed Systems

12

--

2

Dr Nedunchezhian R

Data Analytics and Software Engineering

7

4

3

Dr.N.K.Karthikeyan

Computer Networks and Mobile Computing

3

8

4

Dr.M.Rajalakshmi

Data Analytics

10

--

5

Dr.A.Kunthavai

Dsitributed Systems and Image Processing

5

--

6

Dr.M.Sangeetha

Software Engineering and cyber secuirty

8

--

7

Dr.Amshakala

Data Analytics

2

6

8

Dr.Mohanapriya

Computer Networks

3

5

42

Department of Civil Engineering:

S.No

Name of the supervisor

Research area/ Specialisation

Phd Ongoing

No. of Vacancy

1.

Dr.V.G. Srisanthi (Professor)

Structural Engineering

10

1

2.

Dr.R. Sathyanarayan Sridhar (Professor)

Geotechnical Engineering & Remote Sensing and GIS.

10

1

3.

Dr.V. Nagarajan (Associate Professor)


2

6

4.

Dr.S.Arulselvan (Associate Professor)

Structural Engineering and construction Engineering

--

8

5.

Dr.R.Saraswathi (Associate Professor)


7

1

6.

Dr.M.P. Muthuraj (Assistant Professor)


5

0

7.

Dr.V.G. Kalpana (Assistant Professor)


4

1

8.

Dr.S.Shanmugapriya (Assistant Professor)

Construction Engineering and Management

1

4

43

Department of Mechanical Engineering: SL.NO

NAME

SPECIFICATION

Number of Ph.D Ongoing

No. of Vacancy

Manufacturing systems Engg

6

6


5

--


11

--

Heat Transfer, Fluid Dynamics,

1

10


9

--

Manufacturing Sciences

2

6

Design, Materials, Thermal

10

--

Dr.V.Selladurai 1 Principal Dr.R.Sivasubramanian 2

Professor (To be relieved in May 2018) Dr.K.Marimuthu

3 Professor Dr.SridharThyageswaran 4 Professor Dr.V.Senthil 5 Associate Professor Dr.N.RajamRamaswamy 6 Associate Professor 7

Dr.G.Sureshkannan

44

Associate Professor Dr.Rajesh Ranganathan 8 Professor

Manufacturing, Supply Chain Management

10

1

Heat Transfer and Thermal Science

6

2

Welding

5

--

Dr.A.S.Krishnan 9 Associate Professor Dr.R.Sathiskumar 10 Assistant Professor

Department of Electronics & Communication Engineering:

SL.NO

NAME Dr. A. Rajeswary

1 Professor Dr. S. Uma Maheswari 2 Professor Dr. M. Poongothai 3 Associate Professor Dr. I.S. Akila 4 Assistant Professor Dr. T. Balakumaran 5 Assistant Professor

SPECIFICATION

Number of Ph.D Ongoing

No. of Vacancy

Information and Communication Engg.

11

--


10

1


02

6


01

4


04

1

45

3. COLLEGE OF ENGINEERING,TRIVANDRUM - CT List of Guides Civil Engineering

S.No

List of Guides

No of PhD seats available

1

Dr.M.S Girish

1

2

Dr. P G Jairaj

1

3

Dr. Sheela Evangeline

1

4

Dr.Mini Soman

1

5

Dr. Jayasree P K

2

6

Dr. Bindhu K R

1

7

Dr.Beena K P

1

8

Dr. Manju V.S

1

9

Dr.Girija K

1

10

Dr. Priyadarsini R S

1

11

Dr. Binu Sara Mathew

1

46

12

Dr. Padma Kumar

1

13

Dr. Ajith G Nair

1

14

Dr. Biju Longhinos

1

15

Dr. Yashida Nadir

1

16

Dr. S. Sreekumar

2


S.No

List of Guides

No of PhD seats available

17

Dr. K Krishnakumar

1

18

Dr. K Jayaraj

0

19

Dr. Bijulal D

2

20

Dr. Baiju B

5

21

Dr. Rajkumar M R

3

22

Dr. S. Sunil Kumar

4

23

Dr. Abilash Suriyan R

4

47

24

Dr. Rani S

5

25

Dr. Ranjith S Kumar

1

26

Dr. Anjan R Nair

5

27

Dr. K. C. Gopalakrishnan

1

Electrical and Electronics Engineering

S.No

List of Guides

No of PhD Seats Available

28

Dr. S. Usha Kumari

1

29

Dr. T S Savier

5

30

Dr. Francis M Fernandez

3

31

Dr. R M Shereef

5

32

Dr. Lal Priya

5

33

Dr. Bisharathu Beevi A

2

48

Electronics and Communication Engineering S.No

List of guides

No of PhD seats Available

34

Dr Jiji C V

0

35

Dr. Ciza Thomas

0

36

Dr. Biji Jacob

1

37

Dr. Suresh K

0

38

Dr. Tara Raveendran

2

39

Dr. Shiny G

2

40

Dr. Santhosh Kumar S

1

49

No of PhD

Department Name and

NIRF

QIP approved

seats wise no

AICTE ID of the Institute

Ranking , if any

research Research

departments in the institute

Major

available

facilities in areas

of PhD supervisors

(supervisor

the

wise)

departments Foamed Concrete Mixer Foam generator Thermal conductivity meter Structural

Compressor Testing

Engineering, Geo technology, COLLEGE OF ENGINEERING – TRIVANDRUM1-8262311

Civil Traffic and Engineering

16

18

Transportation, Marine Geology, Hydraulics

machine, Basic tests on bitumen,Marsh all Test, IDT test,Loading frame,Displace ment Sensor,Hydraul ic Jack,Load Cell

50

Mechanical

11

Engineering

Refrigiration

Advanced Heat

and Air

transfer Lab,

Conditioning,

Optimization

Machine

Solar

Design,

Manufacturing

Industrial

, Micro Nano

Engineering

Fluid lab, Fluid

and operation,

Dynamic Lab,

Thermal

Machine

Science, Heat

Dynamic lab,

transfer

Tribology Lab,

Engineering,

System

Cryogenic

Simulation

Heat Transfer,

Lab,

Gas Dynamics,

Ergonomics

Tribology

lab, NDC Lab,

31

Work Study Lab,

51

4.COLLEGE OF ENGINEERING PUNE - CP Name of Department: CIVIL ENGINEERING Facilities available in the department: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

Universal Geotextile Machine High volume sampler Direct Reading BOD Monitoring System COD Analysis System MIDAS Software. NISA Software Auto CAD-2005 Software. GEO$ Software Aqua meter-Computerized Resistivity Meter UTM 100-60 T. Tensometer Plumbing Lab Concrete Technology Lab

Sl No

Name of the faculty

Department

Dr. S. S. Bhosale

Civil Engineering

Specialization

Number of vacancy for Ph D admission

Geotechnical 1

5 Engineering Structural

2

Dr. R. R. Joshi

Civil Engineering


3

Dr. S. D. Kulkarni

Civil Engineering


4

Dr. S. N. Madhekar

Civil Engineering


5

Dr. B. M. Dawari

Civil Engineering

0 Engineering

6

Dr. I. P. Sonar

Civil Engineering

52

Structural

0

Engineering Geotechnical 7

Dr. K. K. Tripathi

Civil Engineering

1 Engineering Construction and

8

Dr. M.S. Randive

Civil Engineering

0 Management Environmental and

9

Dr. A. D. Thube

Civil Engineering

0 Water resources Town and country

10

Dr. P. M. Ravai

Civil Engineering

3 planning Town and country

11

Dr. S. G. Sonar

Civil Engineering

0 planning

Name of Department: MECHANICAL ENGINEERING Facilities available in the department: 1. 2. 3. 4. 5. 6. 7.

Danfoss Centre of Excellence Refrigeration and Air Conditioning lab Computational Cluster PIV and Laser Ignition research Lab Kirloskar IC Engine research Lab Forbes Marshall Steam Lab Non conventional Energy Lab Micro Machining Lab

53

Sl No

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

Name of the faculty

Department

Specialization


Dr. B. B. Ahuja


Manufacturing

2

Dr. C. M. Sewatkar


Thermal and Fluid

0

Dr. S. N.Sapali


Thermal and Fluid

4

Dr. D.N.Malkhede


Thermal and Fluid

3

Dr. D.W.pande


Design Engineering

0

Dr. A. P. Bhattu


Design Engineering

6

Dr. S. S. Bhavikatti


Design Engineering and Manufacturing

6

Dr. N. K. Chougule


Design Engineering

3

Dr. P. R. Dhamangaonkar


Thermal and Fluid

6

Dr. V. K. Haribhakta


Manufacturing

6

Dr. Mrs. M. G. Karnik


Design and Manufacturing

2

Dr. M. P. Khond


Industrial engineering

1

Dr. R. N. Ladhwe


Design and Manufacturing

6

54

25.

26.

27.

28.

29.

30.

31.

32.

Dr. M. R. Nandgaonkar


Thermal and Fluid

2

Dr. S. S. Ohol


Robotics

1

Dr. S. S. Pardeshi


Manufacturing

1

Dr. S. B. Patil


Manufacturing

1

Dr. V. K. Tripathi


Design Engineering

2

Dr. P. S. Shinde


Design Engineering

6

Dr. Ravi Warkhedkar


Design Engineering

3

Dr. D. R. Pangavhane


Thermal and Fluid

6

Name of Department: ELECTRICAL ENGINEERING Facilities available in the department: 1. Center of Excellence Smart Renewable energy System 2. virtual Lab 3. Modal of Unified Power Flow Controller 4. Simulation using MATLAB APT/EMTP,PSCAD, MAXWELL LABVIEW, PSIM, PSPICE, DigSILENT 5. High Voltage Lab 6. Power Control Lab 7. Electric Machine Lab 8. Microcontroller Lab 9. Power System Analysis Lab 10. Power System operation and control Lab

11. Digital Electronics Lab

55

Name of the faculty

Department

Specialization


Dr. B. N. Chaudhari


Electrical Machines

3

Dr. D. B. Talange


Systems and Control

3

Dr. Mrs. S. P. Ghanegaonkar


Power Systems

5

Dr. S. R. Kurode


Control Engineering

2

Dr. Mrs. U. M. MATE


Power Systems

5

Dr. Mrs. Meera Murali


Power Systems

5

Dr. V. N. Pande


Power Systems

2

Dr. Mrs. V. S. Rajguru


Power Systems

5

Dr. S. S. Dambhare


Power Systems

2

Dr. R. T. Ugale


Electrical Machines

5

Sl No

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

Name of Department: COMPUTER ENGINEERING AND IT Facilities available in the department: 1. System Software Lab 2. Advanced Software Lab 3. Database Lab 4. Graphics and Multimedia Lab 5. Digital and microprocessor Lab 6. Internet Security Lab

56

7. 8. 9. 10. 11.

Programming Lab Cloud computing Lab NVIDIA Lab Cognizant Lab Data mining Lab

Sl No

Name of the faculty

Department

Specialization


Digital Signal Processing

1

Computer and IT 43.

44.

45.

46.

47.

48.

49.

50.

Dr. V. S. Inamder

Dr. Jagannath Aghav

Computer and IT

Data Analytics, Machine Learning, and Synchronous programming

0

Dr. V. Z. Attar

Computer and IT

Database management System

1

Dr. Y. V. Haribhakta

Computer and IT

Machine learning. data mining. Information Retrieval

0

Dr. Jibi Abraham

Computer and IT

Cloud Virtualization and big Data. Cloud Security

0

Dr. S. B. Mane

Computer and IT

Network Security. Security In Computing

0

Dr. V. K. Pachghare

Computer and IT

Security In Computing Graphics and Visualization

1

Dr. Parag Kulkarni

Computer and IT

Computer Programming

0

57

Name of Department: INSTRUMENTATION AND ENGINEERING Facilities available in the department: 1. Pilot plants like Spray Dryer-Bioreactor. Computing Facilities. QCM Spin coatings. 2. Signal and Image processing Tools. Control tools. chemical sensors developed tools. 3. Sensors System tools and hardware 4. Power electronics. hardware and software.

Sl No

51.

52.

53.

54.

55.

56.

57.

Name of the faculty

Department

Specialization


Dr. C. Y. Patil

Instrumentation and Engineering

Control, DSP, Image processing

1

Dr. S. L. Patil


Power Electronics

3

Dr. S. D. Agashe


Sensors Automation and Process control

6

Dr. P. D. Shendge


Control System

2

Dr. R. P. Mudhalwadkar


Chemical Sensors, Gas Sensors System Development , Smart System.

3

Dr. D. N. Sonawane


Embedded Control, Modal Prediction Control

3

Dr. U. M. Chaskar


Wearable devices and diagnostic signal and image Analysis for bio signal means

2

Name of Department: METALLURGY AND MATERIALS SCIENCE Facilities available in the department: 1. Corrosion Lab 2. Heat Treatment Lab 3. Image Analysis Lab (Image Analyzer With Inverted Metallurgical Microscope) 4. Materials Analysis Lab 5. Material Testing Lab

58

6. 7. 8. 9. 10.

Nano composite Lab(4Point Probe Conductivity Meter) Physical Metallurgy Lab Powder Metallurgy Lab Surface Engineering Lab Tribology Lab Sl No

58.

59.

60.

61.

62.

63.

Name of the faculty

Department

Specialization


Dr. N. B. Dokey

Metallurgy Engineering

Power metallurgy and synthesis of alloy

2

Dr. S. P. Butee


Ceramics, thermo Mechanical processing

0

Dr. P. P. Deshpande


Corrosion and organic protective Coating

2

Dr. S. T. Vagge


Corrosion and Surface Engineering

3

Dr. R. K. Goyal


Polymer matrix composites and Nano Material

3

Dr. M. J. Rathod


Laser Material processing solidification process

0

Name of Department: PRODUTION ENGINEERING AND IM Facilities available in the department: 1. 2. 3. 4.

FAB LAB, Rapid Prototyping Lab Tero technology-tribology Lab Workshop With CNC Machine, VMC CMM, Ergonomics Lab, non Conventional lab

59

Sl No

64.

65.

66.

67.

68.

69.

Name of the faculty

Department

Specialization


Dr. B. B. Ahuja


Manufacturing. CAD-CAMCIM. Additive Manufacturing, Robotics

2

Dr. Rajiv .B


Manufacturing, Optimization

0

Dr. M. D. Jaybhaya


Reliability Tero Technology, Robotics

2

Dr. Mrs. A. V. Mulay


Rapid Prototyping. reverse Engineering, CAD-CAM

3

Dr. Mrs. N. R. Rajhans


Ergonomics Optimization and Simulation

3

Dr. B. U. Sonawane


Tribology, Reliability, Metal Forming

0

60

5. GOVERNMENT ENGINEERING COLLEGE, THRISSUR

- GK

Department of Electrical and Electronics Engineering, GEC Thrissur Sl. No.

Ph.D supervisor

No. of Ph.D seats available

Research areas/Specialization

1

Dr. Jayanand. B

2

Power Electronics, Drives, Neural Networks

2

Dr. Nandakumar. M

2

Power Electronics & drives, power quality, Grid Connected Inverter Systems, FACTS and Custom power devices, DC-DC converters

3

Dr. Reji P

2

Power Management, Generation-Transmission- Distribution Power Quality, Renewable Energy Systems

4

Dr. Jasmine. E. A

2

Power system optimization

5

Dr.Jiji K S

4

Finite Element Analysis of Electrical Machines, Computational Electromagnetics

6

Dr.E.K Bindumol

4

Power Systems, Distributed Generation, Power Quality, CPD

7

Dr.Rameshkumar P

4

CSliding Mode Control and its Application, Biomedical Signal Processing, Adaptive and Iterative learning control.

8

Dr. Jaison Mathew

2

Power Electronics Converters, Electric Motor Drives, Power Quality, Multilevel Inverters, Modulation Techniques

total

22

61

Sl. No.

Major research facilities in the departments Harwares

Softwares

1

Solar PV System

MATLAB- Version R2013a with toolboxes

2

Transmission Line Simulator

Maxwell Magnetic software

1200 V ,100 A IGBT based 3 leg 2 level Inverter module(3 nos)

ETAP software

Hall effect current sensor(6 nos)

PSPICE software

Speed sensor(2 nos)

CYME Transmission software

3 Phase isolating transformer(2)

PSIM software

3

4

Twin rotor MIMO system including interface card and cable

5

3 KW Solar panel module, structure cable, junction box

6

(a) Fluke 100 MHz 4 channel colour scope meter(1 nos)

62

(b) AH make converter module three phase 415 V,20A DC diode based(3 nos)

(c) Delta make V/F control AC drive 415 V 3 phase input and output converter and 3 phase induction motor 20 Amps(2 nos)

(d) Fluke make 1000 Amps true RMS AC/DC digital clamp meter(2nos)

(e) Amprob LCR meter(2 nos) 7

A 622 AC/DC current probe 100A

8

P 5205 A high voltage probe (a) 3 phase IGBT based inverter stack (01 nos)

9

(b) 1HP 3 phase BLDC Motor 320 V with mechanical loading(1 nos)

Current and voltage sensors (1 nos)

63

(c ) Three phase three level inverter(1 nos) 6 PWM generation with LADC(2 nos) 10

Mixed domain oscilloscope 350 MHz

11

Intelligent power module for motor control application

12

Wind Energy Emulator Module

13

TD52014C Digital oscilloscope

14

Single phase digital Wattmeter PX110

15

Three phase digital Wattmeter PX120

16

LUX Meter

17

Mixed domain oscilloscope 350 MHz THD PO200 Differential probe(2nos)

18 A 621 AC Current Probe (2nos)

19

FPGA Based BLDC Motor Drive with accesories

64

20

DELL optiplex PC i5 MSWindows 8

21

NI Lab VIEW System Desigh suite hardware Dell Power Edge R730 Server with rail (1nos)

22

Vinwarer 5 phase 6 kit(1 nos) Winsrve std 2012 R2 (1 nos) PE5121 Digital meter class 1.0 1ph(1nos) PE5120 Digital meter class 1.0 3ph(1nos)

23

Ag 1000 meter(2nos) Beldon make cable(50 mts) Elnet Pro-EMS Software(1 nos) Delta SM330-AR-22 programmable power supply (1nos)

24

Delt INTMOD SIM for SM 3300 Series (1nos) Xeltek super probios programmer mode 610P(1nos)

65

10KVA, 600 V, 4 leg inverter for laboratory and research purpose switching frequency atleast up to 25 KHz. 25

4 nos. of 50 A current sensors and One 600V voltage sensor

26

TMS320F28335 Based DSP Board and JTAG Spec:

DSP TMS320F28335 Development board , 15 ADC inputs, 12 channel PWM outputs, Push button switches, LED indicators, on board incremental encoder, USB connectivity and XDS100 JTAG.with 4 channel 10 bit DAC outputs and 4 channel 12 bit I2C DAC.

27

Xilinx Spartan6 Based FPGA Board and JTAG.

66

Spec: Xilinx Spartan6 FPGA with minimum 80 Input/Output lines, Platform flash, LED indications, power supply, JTAG.

28

Waveform Function Generator Dual Channel 25MHz Band width with 1mV pp to 10V pp output sine, square, pulse, ramp, noise and arbitrary waveforms

29

Digital storage oscilloscope 100MHz, 4 analog channels, sampling rate minimum 2 giga sample/sec, screen size 8.5 inch, wave form update rate>50000 waveforms/sec, built in 20 MHz arbitrary function generator, > 3 year warrenty

67

30

Digital storage oscilloscope 70MHz, 2 analog channels, sampling rate minimum 2 giga sample/sec, screen size 8.5 inch, wave form update rate>50000 waveforms/sec, built in 20 MHz arbitrary function generator, > 3 year warrenty

68

6.JADAVPUR UNIVERSITY Name and AICTE ID of the Institute

NIRF Ranking, if any

QIP approved departments in the institute

Department wise no of PhD supervisors

, KOLKATA - JU

No of PhD seats available (supervisor wise)

6th in University 1-21569051

12th in Engineering

18 Civil Engg.

12

13th in Overall.

Chemical Engg.

10

25

69

Research areas/Specialization Environmental Engg. & Management. Special Emphasis on Solid Waste Management, Risk Assessment Earthquake Engineering, Structural Dynamics Traffic Planning & Management. Remote Sensing & GIS. Highway Engineering. Disaster Management. Construction Materials. Geotechnical Engineering Behavioural Study of Reinforced Concrete Structure / Composite Structure Strengthened with FRP. Response of Reinforced Concrete Sub-Structure Supported on Elastic Medium. Multiphase Bioreactors. Waste to Energy through thermochemical and biochemical routes. Synrgism of Probiotics and Prebiotics. Phhotobioreactors. Microfluidic Bioreactors. Process Intensification, Heat & Mass Transfer. Nanotechnology, Electro-catalyst and photo-catalyst and their application in ORR, fuel cell, hydrogen generation and conversion of carbonidioxide to valuable products. Industrial waste energy recovery using thermoelectric generator. Hyterogeneous catalysis, Reaction Engineerng, Vacuum Drying, Waste Volorization, Biofuel, Engine Performance and Emission Assessment. Environment Pollution Control. Mass transfer, Microwave assisted unit operations, Nanofluids, Catalysis and Chemical Reaction Engineering, Activated Carbon, Electrochemical Water Purification. Fluid Mechanics, Transport Phenomena. Environment Pollution Control, Waste Water treatment, Energy, Biofuel, Catalysis. Nanomaterials and Nanotechnology, Waste-water treatment, OO2 Capture,Biofuel. Energy harvestation. Membrane Technology / Separation Process / Environmental Remediation.


All analytical priceless Instruments and computing facilities are available in the departments Moreover all participating departments are having state of the Art, Research facilities including all testing equipment.


Construction Engg.

Computer Sc. & Engg.

Electrical Engg.

8

20

15

51

14

21

70

Structural Engineering. Structural Health Monitoring. Earthquake Engineering & Disaster Mitigation. Concrete Technology. Geotechnical Engineering. Highway Engineering. Geotechnical Engineering. Geotechnical In-Situ Test. Geo-Environmental Engineering. Geoechnical Earthquake Engineering. Steel Structure – Design Aspect. Heritage Structure. Concrete Microstructure. Geo-polymer Concrete. Natural Language Processing. Pattern Recognition, Image Analysis. Data Mining. Mobile Computing, IoT Vlsi Design and Testing, Logic Synthesis, Quantum Computing. Natural Language Processing, Sentiment Analysis, Text Analytics, Bio Natural Language Processing, Social Network Analytics. Deep Learning, Optimization, Document and Medical Image Processing, Artificial Intelligence, Computer Vision. Soft Computing, Pattern Recognition and Machine Learning, Data Science and Big Data Analysis, Image and Video Analysis. Document Image Processing, Image Interpretation, Computational Geometry, Locomotion in Robotics, Computer Graphics. Optimization and Condition Monitoring of HV Systems, Power System Operation and Control. Design & Analysis of Electrical Machine, Condition Monitoring of Electrical Machines. Illumination Engg., Linear/Nonlinear/Adaptive/Optimal Control. Wireless Network Management and Resource Optimization. Power Electronics & Drives, PV-Wind Hybrid Generation. Electromagnetic Fields in Electrical Power Device. Ferroresonance Over-Voltage in Transformer. Electrical Machine Design. Electrical and Dielectric Properties of Some Semiconducting Nanocomposite Materials. Smart Instrumentation for Fault Authentification / Classification. Development of Novel Control System. Power System: Power Quality, Smart Grid, Signal Processing, PV System. High Voltage Engineering and Power System.

All analytical priceless Instruments and computing facilities are available in the departments

Moreover all participating departments are having state of the Art, Research facilities including all testing equipment.


Electronics & Tele Comm. Engg.

Food Tech. & BioChem. Engg.

Instrumentation & Electronics Engg.

Information Technolog y

8

12

3

7

4

8

5

23

71

Machine Intelligence & Cognitive Robotics., . Semiconductor Devices & Photonics, Devices, VLSI, WSN & Digital Water Marking. Image Processing and Machine Learning. Computer Vision, Pattern Recognition, Biomedical Imaging, Multimedia Analysis Microstrip Antenna, Dielectric Resonator Antenna, Matermaterial Antenna, Microstrip Filters. Communication & Signal Processing. Semiconductor Device Modeling. Bio-preservation of Food, Application of Nanotechnology in Agriculture, Ant Carcinogenic Properties of Phytoplankton, Extraction of Bioactive Components from Food Wastes. Bio-inspired Synthesis of nanoparticales and application in food and other biological fields, Alternative Antimicrobials, Bioremediation. Bioremediation, Enzyme Technology. Intelligent Process Control. Fuzzy and Neuro-Fuzzy Systems. Electronics Olfaction. Electronic Tongue, Sensor and Instrumentation. Computer Vision, Sensor and Instrumentation. Embedded Systems, Control System Design, Digital System Design. Embedded Systems.

Network Protocols, Mobility Management, 5G, Deviceto-Device Communication, Cognitive Radio Networks, TCP Multimedia Processing, Pattern Recognition, Computer Vision, Information Security Data Mining, Data Storage, Bio Informatics, Biodiversity. Network Management Protocols, ICT and its Applications, Universal Searching Mechanisms and Optimizations. Algorithms in the domain of Wireless Networks, Network Security, Bio Informatics, Software


Moreover all participating departments are having state of the Art, Research facilities including all testing equipment. All analytical priceless Instruments and computing facilities are available in the departments Moreover all participating departments are having state of the Art, Research facilities including all testing equipment. All analytical priceless Instruments and computing facilities are available in the departments Moreover all participating departments are having state of the Art, Research facilities including all testing equipment.

Mechanical Engg.

30

111

72

Engineering, Machine Intelligence. Distributed Algorithms for Swarm Robots. Parallel Processing, Distributed Computing, GPU Computing, CUDA, Cryptography, Network Security. Speech/Singing Voice Synthesis, Emotion Analytics, Bio Informatics, Geo Spatial Analytics. Manufacturing Process (Welding Technology including Laser Welding, Conventional Machining, Advanced Machining). Computational Fluid Mechanics & Heat Transfer Combustion, Atomization, Multiphase Flow, Heat Transfer, Dynamics of Thermal Systems. Mechanics of Composites Finite Elements in Mutiphysics, Mechatronics, Dynamics of Mechanical & Electromechanical Systems. Vibration, Rotor Dynamics, Vibration Control. Heat Transfer Material Science & Engineering, Industrial Engineering, Process Optimization, Surface Engineering. Computation Solid Mechanics, Mechanics of Functionally Graded Structures. Industrial Engg. OR, Scheduling, Advanced Manufacturing Systems, Heuristics and Metaheuristics, Evolutionary Computing. Mechatronics, CFD Nonlinear Vibration and Dynamics, MEMS, Virtual Manufacturing, Automobile Engg. Thermo-fluid Science, Turbulence, Energy Efficiency and Augmentation, Jets, Material Processing, Biomechanics, Wind Power Thermal Engineering, Boiling & Condensation. Fluid Mechanics, CFD Microfluidics: transport and separation for MEMS and biomedical applications. Composite Materials Fabrication and Tribo Mechanical Characterization, Product Development Performance using SEM Approach. Thermal Science & Engineering: Renewable Energy, Alternative Fuels. Electrohydraulic Control System, Aerodynamics, Optimization based experimental analysis of hydraulic and thermal systems.


Fluid Power & Control Fracture, Fatigue, Creep and Material Modeling Electrohydraulic Systems, Controls Mechanics Pressure Vessel & Its Thermomechanical Study. Thermal Science, Instrumentation, Piping Design, Laser Materials Processing Waste Management, Green Manufacturing, Supply Chain Management, Sustainable Development. Smart Materials, Powder Metallurgy, Pressure Vessels, Composite Materials. Tribology of Materials. CFD, Swirling axi-symmetric and 3-D Flows, Turbulent Fluid Flow, Laminar and Turbulent flow of nanofluid. Rotor Dynamics, Stress & Vibration Analysis Computational & Experimental, Finite Elements. Guidance, Optimization. Reliability Engineering, Quality Engineering, Railway System Modelling.

Metallurgical Engg.

Production Engg.

5

73

3

Corrosion & Protection Fuel cells, Battery Materials for Electrochem. Energy Modeling and Simulation in Material Engineering. Extractive Metallurgy, Materials, nano Biotechnology. Foundry. Solid State Phase Transformation, Fatigue, Materials Characterisation. Composite Materials, Welding, Nano Composites. Plastic Deformation, Fatigue and Fracture, Solid State Phase Transformation. Nanocomposites, Corrosion, Physical Metallurgy.

30

Non-Traditional Micro-machining, Micro-surface Structuring, Electrochemical Micro-machining, Hybrid Micro-machining. Operation Management, Project Management, Total Quality Management, Productivity Management, Industrial Management, Soft Computing, Flexible Skill Development, Maintenance Management, Robotics, Soft Computing Techniques, Multi-criteria Decisionmaking, Maintenance Management, Optimisation Techniques, Quality Control,



Printing Engg.

Power Engg.

3

10

4

13

74

Non Traditional Machining, Laser Material Processing, Micro, Hybrid and Additive Manufacturing, Quality Engineering and Management, Reverse Engineering, Soft Computing & Manufacturing Management. Hybrid Machining Technology, Additive Manufacturing, Laser Material Processing, Reverse Engineering. Wire EDM/Micro EDM, Hybrid Machining, Ergonomics. Laser Beam Micro-machining, Laser Beam Welding, Reverse Engineering, Manufacturing Management. Electro-chemical Discharge, Machining (ECDM), Electro-Discharge Machining, Micro-Machining. Material Science Colour Science & Engineering. Material Sc., Printing Related Problems, Packaging Related Materials and Problems. Digital Image Processing, Computer Vision, Digital Printing and Imaging.


Power System / Optimization Gasification Control and Automation Aerodynamics / Hydropower Hybrid Energy System Microfluidics / Nanofluids / Thermal Manufacturing / Laser Machining / Welding


7.MADHAV INSTITUTE OF TECHNOLOGY & SCIENCE, GWALIOR - MG

Name and AICTE ID of the Institute


QIP Approved Departments in the Institute

Electrical Engineering Madhav Institute of Technology & Science, Gwalior AICTE Permanent ID 1-10746341

Department wise No. of Ph.D. supervisors

Architecture

4

4


Dr. L. Srivastava

1

Evolutionary optimization techniques for power system optimization

Dr. M. Pandit

1

Soft Computing and AI Applications to power system operation with renewable energy integration

4

No

Civil Engineering

No. of Ph.D. seats available (Supervisor wise)

Dr. A.K. Wadhwani

1

Applications of soft computing Techniques with signal Processing Tools in Bio Medical Instrumentation

Dr. S. Wadhwani

1

To combine the advances in Soft Computing Tools and Signal Processing Techniques in applications for the creation of state of Art in real life systems

Dr. S.K. Jain

4

Structural Engineering Materials & Earthquake Resistant Design

Dr. Sanjay Tiwari

6

Structural Engineering Construction Management

Dr. M.K. Trivedi

5

Hydraulics & Construction Cost Management

Dr. R. Kansal

6

Construction Technology Management

Dr. R. K. Pandit

3

Urban Planning

Dr. Alok Sharma

4

Environmental Planning

75

Major research facilities in the departments

1. Bio-Medical Engineering lab 2. Computational lab equipped with all standard power system analysis software packages and MATLAB tool boxes

1. All Civil Engineering lab 2. Project Management Software 3. MATLAB 4. E-Journals ASCE, Science Direct

All Equipments and software for Urban Design & Planning

CSE

Mechanical

4

Dr. Sanjay Singh Jadon

4

Urban Design

Dr. Anjali Patil

4

Urban Planning

Dr. Rajendra Kumar Gupta

3

Data Mining & Warehousing

Dr. Akhilesh Tiwari

5

Data Mining & Warehousing

Dr. Manish Dixit

5

Image Processing

Dr. Sanjiv Sharma

6

Data Mining

Dr. Pratesh Jayaswal

2

Machine Design, Maintenance Engineering, Vibration Analysis

Dr. C.S. Malvi

5

Solar Design

Dr. M.K. Gaur

3

Solar thermal Engineering

Dr. Manish Sagar

5

Production and operation management

4

76

1. Computing Facility 2. Subscription of Reputed Journals 3. Availability of various tools for Implementation and experimentation purpose

1. High end equipments and softwares for production, design, thermal and maintenance 2. All laboratories are equipped with modern equpments/facility for research perpose 3. SKF relibility training centre for maintenance engineering 4. Department is having the inductrial support (industry of malanpur & Banmore)

9.PONDICHERRY ENGINEERING COLLEGE - PY Sl.No

Name

Vacancy Hydraulics Water Resources Engineering, Non-Conventional Materials, Construction Management, Ground Water Management.

1.

CE

Dr.T.Sundararajan

2.

CE

Dr.S.Kothandaraman

3.

CE

Dr.R.Saravanane

4.

CE

Dr.V.Murugaiyan

Geotechnical Engineering, Environmental Geo-technology, Soil Pollution, Soil Structure Interactions.

5.

CE

Dr.A.Jagannathan

Cost-effective Construction Material / Technology Fiber Reinforced Concrete / Matrix, Thin Reinforced Cementitious Matrix/Product and Ferro cement

6.

CE

Dr.G.Ramakrishna

Structural Engineering, Fiber Reinforced Concrete, Non-Conventional Building Materials

7.

CE

Dr.S.Govindarajane

Water Supply and Waste Water Engg. Industrial Waste Management, Energy and Environmental Management

8.

CE

Dr.G.Vijayakumar

9.

CE

Dr.P.Ramadoss

10.

CE

Dr.K.Pandurangan

11.

CE

Dr.S.Eswari

12.

CE

Dr.A.Muthadhi

Structural Engineering, Construction Materials, Non-Conventional Materials.

Coastal Engineering and Construction Management and Technology

Structural Engineering, HPC, Concrete Fiber Composites Structural Engineering, Special Concretes, Sustainable Materials

Structural Engineering, FRC and Materials

Concrete Composites, Non-Conventional and New Materials, Sustainability

77

13

CE

Dr.P.Revathi

1.

ECE

Dr. P. Dananjayan

2.

ECE

Dr. E. Srinivasan

Digital Signal Processing, Digital Image Processing

3.

ECE

Dr. G. Nagarajan

Wireless Communication and Networks

4.

ECE

Dr. M. Tamilarasi

Wireless Communications, Digital System Design

5.

ECE

6.

ECE

Dr. V. Saminadan

Optical Communication, Optical Networks, Wireless Communication and Networks, VLSI Design

7.

ECE

Dr. D. Saraswady

Adhoc and Sensor Networks, Wireless Communication

8.

ECE

Dr. G. Sivaradje

9.

ECE

Dr. R. Gunasundari

Adhoc and Sensor Networks, Wireless Communication, Biomedical Signal Processing

10.

ECE

Dr. L. Nithyanandan

Wireless Communication, Sensor Networks, Telemedicine

11.

ECE

Dr. K. Jayanthi

12.

ECE

Dr. V. Vijayalakshmi

13.

ECE

Dr. S. Tamilselvan

14.

ECE

Dr.K.Kumar

Dr.Gnanou Florence

Structural Engineering, Construction Materials

Sudha

Wireless Communication

Medical optics, Digital Image Processing, Digital Signal Processing, Biomedical Engineering

Wireless Communication, Image Processing

Personal and Wireless Communication Networks, Bioinformatics, Image Processing.

Information and Network Security, Securing Wireless and Sensor Networks, ASIC and VLSI Design

Wireless Communication & networks, VLSI design, Solid State Devices

Microwave communications,

78

ECE 1

ME

Wireless communications, Fibre optic communications, Antennas Dr. T. Senthilvelan

Production Engg.

2

ME

Dr. A. Selvaraju

3

ME

Dr. K. Mahadevan

Materials and Manufacturing

4

ME

Dr.N. Alagumurthi

Modeling & Simulation studies in Mech.Engg.

5

ME

Dr. M. Pugazhvadivu

Internal Combustion Engines, Alternative Fuels

6

ME

Dr. P. Mathiazhagan

Heat Transfer and Corrosion

7

ME

Dr. B. Prabu

8

ME

Dr. S. Mohamed Ali

Tribology

9

ME

Dr. AV. Raviprakash

Production Engineering, Production/Operations Management, Computational Mechanics

10

ME

Dr. K. Palaniradja

11

ME

Dr. A. Kalaisselvane

12

ME

Dr R.Elansezhian

Production Engineering, Nano materials, Nano Coating, Corrosion, Surface Engineering

13

ME

Dr. L. Kumararaja

Renewable Energy Systems

1

CSE

Dr. P. Thambidurai

Artificial Intelligence, Data compression and Multimedia Systems, Network Security and Steganography

2

CSE

Dr. K. Vivekanandan

3

CSE

Dr. N. Sreenath

4

CSE

Dr. D. Loganathan

5

CSE

Dr. S. Kanmani

6

CSE

Dr. M. Ezhilarasan

Image/Video Processing and Coding, Multi-Biometrics

7

CSE

Dr. S. Saraswathi

Natural Language Processing, Speech Processing

8

CSE

Dr. M. Sugumaran

Spatial and Temporal Data, Parallel and Distributed Computing, Information Security Network Technologies

9

CSE

Dr. R. Manoharan

10

CSE

Dr. F. Sagayaraj Francis

11

CSE

Dr. G. Zayaraz

Thermal Sciences and engineering, CFD, design and simulation of thermal systems, Renewable energy sources

Engineering Design, FEA

Modeling & Simulation in Manufacturing & Thermal Systems Internal Combustion Engines, Refrigeration & Air Conditioning & Renewable Energy Sources

Object Oriented System, Software Engineering, Information Security Computer Networks, Network Security, Privacy & Trust Image Processing, Information Security Optimization Algorithms, Meta-heuristic optimization, Intelligent Computing, Software Engineering

Data Management, Data Modeling and Analysis Software Engineering & Architecture, Information Security

79

12

CSE

Dr. E. Ilavarasan

Web Service Computing

13

CSE

Dr. Ka. Selvaradjou

14

CSE

Dr. R. Kalpana

Parallel and Distributed Systems, Computational Algorithms, Vehicle Tracking Problems and Optimization

15

CSE

Dr. A. Amuthan

Information Security, Ad Hoc Networks, Cloud Computing

15

CSE

Dr. S. Lakshmana Pandian

17

CSE

Dr. M. S. Anbarasi

18

CSE

Dr. K. Saruladha

19

CSE

Dr. V. Govindasamy

20

CSE

Dr. M. Thirumaran

21

CSE

Dr.N.Sivakumar

22

CSE

Dr.V.Geetha

Distributed Computing, Cloud Computing, Data Security

23

CSE

Dr. P.Salini

Software Engineering, Security and Ontology, Optimization Techniques

1

EEE

Dr. K. Manivannan

2

EEE

Dr. Ananda Natarajan

3

EEE

Dr. S. Himavathi

4

EEE

Dr.A.Muthuramalingam

5

EEE

Dr.R.Gnanadass

Power system optimization

6

EEE

Dr. Alamelu Nachiappan

DSP Based Power Control

7

EEE

Dr. G. Ravi

8

EEE

Dr. K. Rajambal

9

EEE

Dr. Christopher Asir Rajan

Wireless Networks, Embedded Systems, Cloud Computing

Natural Language Processing, Automata Theory and Compiler Design, Embedded Systems Data Mining, Cloud Computing, Software Engineering Data and information management, Ontology engineering, Opinion mining and sentiment analysis Computational Intelligence, Data Processing, Business Intelligence Service Oriented Architecture, Web Service Change Management, Big Data and Cloud Computing Software Engineering, Agent Technology, Database Management System

Digital Signal Processing, Intelligent Techniques, Power Electronics, Power Systems, Optimization, Computer Algorithms Process control and instrumentation, Adaptive and nonlinear control Intelligent techniques for Modeling, control, estimation, tracking, fault diagnosis and condition monitoring Microprocessor/ micro controller/FPGA based system design Power Electronics, Drives and controlAI techniques, modeling , estimation, fault diagnosis and condition monitoring of Electrical and Electronic Systems

Applications of AI techniques to Power system optimization and electrical machines, Power Electronics, Electrical drives, Electric vehicles, Wind Energy systems Power system optimization, operation, control, planning, Power electronic application to power systems AI techniques to Power systems.

80

10

EEE

Dr. K. Elanseralathan

High Voltage insulations engineering, nano dielectircs and modelling of brekdown phenomena

11

EEE

Dr. Sudhakaran

12

EEE

Dr. S. Jeevanantham

Power Electronics

13

EEE

Dr. M. Arounassaalme

Digital Control System

14

EEE

Dr. Mahesh Kumar

15

EEE

Dr. B. Geethalakshmi

16

EEE

Dr. R. Rajathy

17

EEE

Dr.K.Ramakrishnan

18

EEE

Dr. N. P. Subramanian

19

EEE

Dr. Ajay Vimal Raj

Power system operation and control

Electrical machines, control and instrucmentation Power Electronics and drives, facts controller Power System restructuring, power system optimization Control Systems Power System Quality Power System Optimization

81

10.PSG COLLEGE OF TECHNOLOGY, COIMBATORE-641004 - PS





Dr.P.R.Thyla

PSG College of Technology 1-4165514


Designatioin

Professor




4

Machine Design, Tribology, Finite Element Analysis, Composite Materials

Machine Tool Research Center, Design Laboratory, Tribology Laboratory, Nano Technology Laboratory, Materials Testing Laboratory

Fluid Machinery Laboratory, PSG RANE - Centre for Manufacturing Systems

Dr.K.Ragu

Associate Professor

6

Fluid Mechanics, Fluid Machinery, Tool Design, Design for Manufacturing & Assembly, Fluid Machinery

Dr.K.Kannan

Associate Professor

3

Thermal Engineering, Energy Engineering

Heat Powre Laboratory, Energy Engineering Laboratory

Dr.G.Sundararaj

Professor

9

Metrology and Quality Control, Value Engineering, Industrial Engineering

Metrology Laboratory, Industrial Engineering Laboratory

Dr.J. Kanchana

Professor

7

Computer Integrated Manufacturing

CNC Laboratory, FESTO – PSG Centre for Automation and Control Engineering,Sensorics Laboratory

Dr.R.Velavan

Professor

6

Energy Engineering, Thermal Engineering

Thermal Enginering Laboratory, Energy Engineering Laboratory

Dr. A.Ramesh Babu

Professor

10

Manufacturing, Rapid Prototyping, Laser Cutting

Rapid Prototyping Lab (TIFACCORE), Plasma Cutting Machine

Dr.D.Rajenthirakumar

Professor

5

Metal Forming, Lean Manufacturing

Metal Forming Machine, Lean Manufacturing Laboratory

29

82

Dr.M.Yuvaraja


PSG College of Technology


Associate Professor

2

Machine Design, Composite Materials, Vibration

Dr.V.Jaiganesh

Associate Professor

8


Dr.S.Syath Abuthakeer

Associate Professor

1

Machine Tool Design, Lean Manufacturing

Dr.S.Babu

Associate Professor

5

Energy Engineering





Dr. K.Praksan

8

Dr.R.Gandinathan

8

Dr.S.R.Devadasan

7

Dr. P.Sadagopan

7

11

83

Vibration and Noise Engg. Laboratory Industrial Engineering Laboratory, Operations Research Labortory, Manufacturing Systems Design Laboratory Machine Tool Research Center, Design Laboratory,Lean Manufacturing Laboratory Energy Engineering Laboratory


Digital Manufacturing Product Lifecycle Management (Postgraduate class) Computer Aided Design Mathematical and Physical Modeling Engineering Economics Industrial Engineering and Management Industrial Engineering Lean Manufacturing Lean Six Sigma Tools And Techniques For Indian Small Medium Enterprises Quality Engineering Supply Chain Management TPM TQM Rotordynamics


1. 2. 3.

CAD/CAM Lab Ergonomics Lab Engineering Design Lab 4. Precision Machining Lab 5. Virtual Prototyping and Design Lab 6. Sensors, Automation and MPS Lab 7. Ultrasonic Welding Lab 8. Subtractive RP Lab 9. Virtual Modeling and Simulation Lab 10. PDM and Integrated Product Development Lab 11. Manufacturing Process Simulation Lab

Design of Transmission Systems Ergonomics and Vehicle Body Engineering Finite Element Analysis Fracture and failure analysis

84

Dr. S. Saravanan

9

Dr.V.Krishnaraj

0

Dr.M.Senthilkumar

2

Dr.S.Elangovan

5

Dr.G.Madhan Mohan

0

Dr.K.Somasundara Vinoth

2

Dr.S.P.Leo Kumar

2

Metal Forming Mechanical Behavior of Materials Failure analysis of Electronic Packaging Vibration Enginering Design of Machine Elements Composite Materials Machining Rotordynamics Application Of Smart Materials In Vibration Control Machine Design Energy Harvesting Metal Forming Metal Joining Welding Technology Incremental Forming Ergonomics Materials Characterisation Materials Engineering Production Technology Physical Metallurgy Tribology Precision Machining Knowledge Based System Tool Based Micromachining ICT in Micromachining

12. Metrology and Machine Vision Lab





29

Automobile Engineering




Dr S Neelakrishnan - NIL

Design for Manufacturing Assembly, Automation and Hybrid Electic Vehicle


Centre of Excellance for Electric and Hybrid Vehicles ' Transmission durability testing

Dr P K Rajesh - 9

CAD/CAM & PLM

Dr P Karthikeyan - 2

Fuel Cell, Heat Thansfer and Thermal System

Dr V M Murugesan - 3

Automotive Electronics and Alternate Fuels

Dr N Ganeshkumar - 12

Lean Maunfacturing and PLM

Dr M Subramanian - 12

Acoustics, Composites

6.00




Electronics and Communication Engineering



Dr.SubhaRani Dr.K.Gunavathy Dr.P.T.Vanathi

85

' PACE - Automotive Product Lifecycle Management Lab ' Centre for Automotive Research and Testing Centre - Collaboration with BOSCH, Coimbatore ' Fuel Cell Research Centre for Automotive Applications - Material development and 'Testing for various Fuel Cell Stack Configurations



6

Control Systems and Soft Computing

All ECE Labs with computational facilities

6

Computer Science and Engg.

MATLAB, EMPro, System Vue,

1

Network Security,Soft Computing, and Digital Signal

HFSS, ADS, Cadence, Mentor Graphics,

Processing Dr.V.Krishnaveni

4

Dr.Kesavamurthy.T

NIL

Dr.J.Ramesh

NIL

Dr.G.Umamaheswari

4

Dr.K.V.Anusuya

4

Dr.Thulasimani

4

Dr.P.Kalpana

6

Dr.P.Visalakshi

8

Dr.C.LakshmiDeepika

8

Dr.S.AllinChristie

7

Dr.M.Santhanalakshmi

5

Dr.Rajalakshmi

7

Dr.G.Srivatsun

NIL

Dr.A.Kannammal

6

Dr.C.Ramya

6

Dr. P.Saravanan

7

Dr.Venkateswari

6

Dr.Sivakumar.S

2

Dr.K.Thiyagarajan

2

86

Digital Signal Processing, Biomedical Signal Processing, andCommunication Systems Wireless Communication, and Digital Image Processing VLSI Design and Testing, Communication Systems Information Security Wireless Networks, Embedded Systems, andComputer Architecture Wireless Communication, Network Security, andVLSI VLSI Design and Testing Evolutionary Computation, Computer Networks, Operating Systems,and Embedded Systems Electronics, Image and Signal Processing Medical Image Processing & Analysis Analog / Mixed Signal VLSI Design VLSI Signal Processing Antennas, Rf, Mircrowave and Wireless Technologies Image Processing,and Network Security Digital Image Processing, Biomedical Image Processing, andSignal Processing VLSI Design, Testing, Verification, andHardware Security Wireless Communication, Networking,and Wireless Sensor Networks Wireless Sensor Networks, Evolutionary Computation, Signal Processing, Mobile Computing and Communication Antennas & RF Circuit Design, Image Processing andWireless

Tanner, Synopsys, Xlinx, Network Analyzer Signal Analyzer. Hardware related to Digital Signal Processing and Embedded Systems

Communication




Dr.Amitava Battacharyya

7

Nano Technology

Dr.D.Gnanaprakash

4

Nano Technology

Dr.M.Ramya

3

Nano Technology



Biotechnology



Dr. M. Ananthasubramanian

8

Quorum sensing , antimicrobial resistance, biomems, tissue engineering

Dr.V.Ramamurthy

9

Biotechnology, genetic Engineering

Dr.P.Rani

9

Oxidative stress, neuro degenerative disorders, sceleno proteins

Dr. S. Selvi

9

Plant Biotechnology, genomics

Dr. J. Hema

7

Environmental biotechnology, plant microbe interaction, industrial waste water treatment & solid waste management

Dr. J.Poongothai

5

Molecular aspects of male infertility, food products

Dr. S.Vidyalakshmi

5

Cancer biology, molecular aspects of infertility

Dr. S. Niju

3

Bioenergy, Biofuels

8

87


1. Molecular biology lab 2. Bioinformatics lab 3.Biofuel lab 4. Plant Tissue culture facility 5. Animal cell culture facility 6. Genetic engineering lab 7. Bioprocess lab 8. Analytical lab

Biomedical Engineering Instrumentation and Control Systems Engineering


Biomedical Engineering





1. Biomedical Signal Processing and Assistive Technology Research Laboratory- This is equipped with Emotiv BCI technology, Epoch headset, EMG Machine, EEG Machine and Pratt-Open source software

2. Medical Informatics Laboratory- This lab is equipped with CC3200 IoT kits, PSOC Microcontroller, Comsol Software, Labview, Code composer studio and Solid Works.

Dr. R. Vidhyapriya

4

Artificial Intelligence, Soft Computing, Wireless Networks,Mobile Computing, Wireless Sensor Networks

Dr. B. Padmapriya

5

Image Processing, Biomedical Engineering

2

3. Computational Biomechanics Laboratory- This lab is equipped with three axis acceleromter,Windows Kinect, 3D Printer, SLA Printer, Cura Software, Solidsworks, Sketchup Software,Kinovea Software

4.Vision and Machine Learning Laboratory- This lab is equipped with Soliton MP CMOS Ares Scan camera, Line scan Camera,Near IR Camera, Thermal Camera, IP based Surveillance camera, Olympus Microscope 5. Electronics and Instrumentatio Laboratory- Fully equipped 6. Embedded systems Laboratory- Fully equipped 7. PSG- TI Center of Excellence for Medical Electronics- This lab is equipped with Medical Portable tools, Monitoring devices, Wireless monitors and IoT kits for Health care monitoring

88




Instrumentation and Control Systems Engineering



3

89


Dr. J. Arunshankar

8

Instrumentation and Control Systems

Dr. S.Esakkirajan

7

Image Processing

Dr. D. Angeline Vijula

7

Control Systems

Major research facilities in the departments Control and Drives Laboratory, Distributed Control Systems Laboratory and Signal Processing Laboratory

11.RAJIV GANDHI INSTITUTE OF TECHNOLOGY, GOVT ENGINEERING COLLEGE, KOTTAYAM - RG






Dr. Jayn M V


Rajiv Gandhi Institute of Technology, Govt Engineering College , Kottayam AICTE Permanent ID 1-8083401


Dr. Prince A

2

Wide Area Mesurements , Battery Energy Storage ,Soft Computing and AI Applications to power system operation with renewable energy integration(Wind/Solar)

Dr. Binoj Kumar A C

5

Power Electronics and Drives

Dr. Praveen A

3

Environmental Planning, Transportation Engineering , Sustainable construction

7

_

Dr. Bindhu B K

4

_

_


High Voltage Engineering, Evolutionary optimization techniques for power system optimization

2

9

No Civil Engineering



90

1. Advanced Drives Lab 2. Computational lab equipped with all standard power system analysis software packages and MATLAB tool boxes 3. LabVIEW, HIL 4. E-Journals ASCE, Science Direct

1. All Civil Engineering lab 2. Project Management Software 3. MATLAB 4. E-Journals ASCE, Science Direct

12.SHRI GURU GOBIND SINGHJI INSTITUTE OF ENGG. & TECH.,NANDED - SG Name and AICTE ID of the Institute






Major research facilities in the departments Communication Lab

Dr. Y.V. Joshi

0

Digital Signal Processing, VLSI Design

Computer Vision and Pattern Recognition Computer Lab-I Computer Lab-II

Shri Guru Gobind Singhji Institute of Engineering & Technology, Vishnupuri, Nanded-431606 Maharashtra

89th rank in the academic year 2015-16 At present not NIRF ranking

Electronics & TeleCommunication Engineering

Instrumentation Engineering

Dr. S.N. Talbar

1

Digital Image Processing, Embedded System

Embedded System Design Lab

Dr. D.D. Doye

0

Speech Processing, Neural Networks

Advance Communication Lab

Dr. R.R. Manthalkar

1

Texture Analysis, Image Processing, VLSI Design

Data Communication Network Lab

Dr. S.V. Bonde

0

Biomedical and Signal Processing

Digital Signal Processing Lab

Dr. S.S. Gajre

1

Biomedical Signal and Image Processing Analog and Digital VLSI Design

Centre for VLSI Design and Verification

Dr. A.B. Gonde

2

Image processing, Data Compression

Centre for Energy storage and Harvesting (Under Process)

Dr. M.B. Kokare

0

Computer Vision, Content Based Image Retrieval Pattern recognition

Project Lab

Dr. A.V. Nandedkar

2

Pattern Recognition, Fuzzy & Neural Networks.

Centre of Excellence (Signal and Image Processing )

Dr. L. M. Waghmare

2

Computerized Process Control, Intelligent Control, Image Processing

Analog and Digital Electronics Laboratory

91

Control Laboratory

Electrical Machines Laboratory Dr. R. S. Holambe

2

Digital Signal Processing, Image Processing, Application of Wavelet

Dr. B. M. Patre

2

Robust Control, Intelligent Control

Biomedical Instrumentation Laboratory

Computer Laboratory (UG)

Computer Laboratory (UG) , Dr. R. H. Chile 1

Process Instrumentation Adaptive Control Power Plant Instrumentation

Emerson - Process Automation Safety System (E-PASS) Advanced Control and Computational Laboratory ( Under DST-FIST)

Dr. S. T. Hamde

2

Biomedical Instrumentation, Bio Signal Processing, Application of Wavelet transform

Dr. V. G. Asutkar

2

Network Analysis, Application of Wavelet transform, System Identification

Dr. R. V. Sawardnya

4

Bio-MEMS & Micro Electronics, Embedded Systems, Advanced Sensors Biomedical Instrumentation,

Dr. V. R. Thool

1

Agricultural Instrumentation, Sensors & Transducer

92

Advance Digital Signal Processing Laboratory

Thermal Engineering Lab

Production/ Mechanical Engineering

Dr. B.M. Dabade

1

Quality Engineering, Process Modeling

Dr. V.M. Nandedkar

0

Sheet Metal Forming, Technology Management

Dr. V.B. Tungikar

0

Finite Element Analysis, Heat Transfer, Composites

Strength of Material

Production Management, Quality and Reliability, Information Asymmetry

Non Conventional Manufacturing Process

Dr. L.N. Wankhade

Heat Transfer Lab.

Metallurgy Lab.

1

Civil Engineering

Dr. M.L. Waikar

2

Water Resources Systems Engineering, Hydrology

Structural Engineering and Concrete Technology Lab. Survey Laboratory

Dr. P.B. Ullagaddi

6


Transportation Engineering Lab

Dr. P.D. Dahe

6

Water Resources, Systems Engineering

Soil Science Lab

Dr. N.H. Kulkarni

6

Groundwater Hydrology, Project Management

Geotechnical Engineering Lab

Dr. L.G. Patil

2

Hydraulics & Water Resources Engg., Environmental Hydraulics

Fluid Mechanics Lab

93

13.THIAGARAJAR COLLEGE OF ENGINEERING, MADURAI - TM


Thiagarajar College of Engineering, Madurai 625 015, Tamilnadu, ID 1-429823423



Departme nt wise no of PhD superviso rs


*Supervisors details available at Anna University Research site: https://cfr.annauniv.edu/research 39th in 2018

CIVIL

12

** Each eligible Supervisor can supervisor of the maximum of 10 scholars. ***About 5 Ph.D seats are available with most of the eligible supervisors

*Supervisors details available at Anna University Research site: https://cfr.annauniv.edu/research CSE

6


94



Structural Engineering, Environmental Engineering, Hydrology and Water Resources Management, , Geotechnical Engineering, Transportation Engineering, Pollution control, Construction materials, Repair & Rehabilitation

1. Structural Engg. Lab 2.Geo polymer lab 3. Environment & water resources lab. 4. soil and roads lab

Network Security, Data Mining, Artificial Intelligence, Multi-core Architecture, Parallel Processing, Computer networks, Knowledge Engineering, Machine Learning, Software Testing, Software Quality and Reliability, Grid Computing, Internet Technology, Compliers, Multimedia, Computer Vision, Biometrics, Multimedia and Graphics, Computer Algorithms

1. System Lab 2. Data base Lab 3.Artificial Intelligent Lab 4.Networks Lab 5. Software Engg Lab

*Supervisors details available at Anna University Research site: https://cfr.annauniv.edu/research EEE

16


*Supervisors details available at Anna University Research site: https://cfr.annauniv.edu/research ECE

20


*Supervisors details available at Anna University Research site: https://cfr.annauniv.edu/research MECH

13


95

Power Systems, Soft computing, Renewable Energy Resources, Energy Conservation and Management, Power Electronics and Drives, Electrical Machines, Optimisation Techniques, Smart Grid, Distributed Generation Systems, Special Machines, Control Systems, FACTS deices and controllers, AI and Expert System Applications

1. Microprocessor Lab. 2. Machines Lab 3. Digital Instrumentation lab 4. Control system Lab 5. Power Electronics Lab 6. Applied Electronics Lab 7.Computer Lab

Wireless Communication, Digital Signal Processing, RF Circuits and Systems, Antennas,, RFMEMS, Image Processing, Remote sensing and GIS, VLSI design, Embedded Systems Sensors and Instrumentation, Wireless networks, Medical Electronics

1. Microwave Lab 2. Agilant Tech and communication Lab 3. Digital signal processing lab 4. Image processing Lab 5. Computer Networks Lab 6. Altra VLSI Lab 7. Medical Electronics Lab 8. MEMS Lab

Thermal Engineering, Computational Fluid Dynamics, Design Engineering, Composite Materials, Automation, CAD/CAM, CIM, Machine Vision, Mechatronics, Rapid Prototyping, Quality Engineering, Reliability Engineering, Industrial Engineering, Manufacturing Management, Logistics and Supply Chain Management, Lean/Agile Manufacturing

1.Industrial Engg Lab 2. Metrology Lab 3. CFD Lab 4.Sheet metal and welding shop 5.Foundry 6.. Heat Transfer Lab 7.Instrumentation and Dynamics Lab 8. Internal combustion Engg. Lab 9.Composite materials Lab 10.Metallurgy Lab 11. Production system support Lab 12. Vision systems Lab 13. RPT

14.TKM COLLEGE OF ENGINEERING, KOLLAM Name and AICTE ID of the Institute





- TK



1. Environmental Engineering

1. Advanced computational lab for structural engineering with latest software

2. Structural Engineering 3. Offshore Structures 1. Dept. of Civil Engg.

4. Structural dynamics 6

18 5. Earthquake Engineering

2.

Structural Dynamics Laboratory

3. Analytical research facility in Water Resources /Environmental Engineering · 4. Advanced Environmental Research laboratory

6. Environmental Science 7. Engineering Geology

1-4914383

2017 : 101-150 2018 : 151-200

2. Dept. of Mechanical Engg.

9

22

96

1. Thermal management of electronic systems 2. Nanofluids/nanorefrigerants 3. Rocket combustion 4. Chill down studies at cryogenic temperature 5. Adsorption refrigeration using solar energy 6. Green buildings 7. Super conductivity 8. Biomechanics

1. Computational Fluid Dynamics Lab.(equipped with high end computers and Software 2. Nanofluid research laboratory 3. Cryogenics laboratory 4. CAD/CAM Centre 5. Biomechanics Lab 6. Central workshop with Fablab to support the research

15.VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY, BURLA - VB Name and AICTE ID of the Institute





Major research facilities in the departments Concrete behavioural Mechanics, Study on self compacting concrete, Earthquake analysis of dam, Optimization Computer Application Engg, Recycled aggregate concrete, Flyash geo polymer concrete,Design of Airambulance, Behaviour of concrete with partial replacement of wastes, Soil stabilization using industrial wastes and bioenzymes, Water and waste water quality analysis, Hydraulic jump spillway profile study, Assessment of area of water bodies , plots etc.

02(No admission)

Geotechnical Engineering, Structural Engineering, Water Resources Engineering,Environmental Engineering, Transportation Engineering

02(No admission)

Machine Design & Analysis, Production Engineering, Thermal Engineering.

ELECTRICAL ENGINEERING

02 ( Admitted in Power System Engineering)

Power System Engineering, Power Electronis & Drives, Control System Engineering, Renewable Energy Resources

ELECTRONICS & TELECOMMUNICATION ENGINEERING

02 (01 admitted in Image Processing)

Signal Processing, Image Processing, Electromagnetics & Microstrip Antenna, Computational Intelligence, VLSI, Wireless Communication

Cardance softwaare,HFSS Softwares, Silvaco software, Spectrom Analyzer, Network Analyzer

PRODUCTION ENGINEERING

02(No admission)

Robotics, Non-Traditional Machining, Manufacturing Systems, Advance Casting,Advance Welding, FMS, CIM,

3D Printer, 3D scanner, Reverse Engineering Software, Electro Chemical Machining, Electro Discharge Machining,,

CIVIL ENGINEERING VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY: BURLA AICTE ID: 1-455946701


Rank Band (101150)

MECHANICAL ENGINEERING

02 IN EACH DEPART MENT

97

Instron computerized UTM,Piezoelectric Force Dynameter,HFCVD Diamond Coating Set-up,Talysurf Surface Roughness Machine, Scratch Testing Machine

Computational Lab, Signal Processing Lab, Power System Lab, High Voltage Lab, Instrumentation Control Lab.

CAD/CAM,RP Operation Management

Nd YAG Laser micromachining set upCMM, UTM, Hydraulic Building, forward and backward Extrusion,FMS

16.WALCHAND COLLEGE OF ENGINEERING,VISHRAMBAG, SANGLI - WS Name and AICTE ID of the Institute

Walchand College of Engineering, Sangli V- 4197831


Rank Band (100 – 150)


Civil Engineering



3

2

98


Civil – Environmental Engineering: Water and Wastewater Treatment, Modeling of Environmental Systems, Solid Waste Management, Air Pollution, Constructed Wetlands, Civil Building Technology: Structural masonry and materials, Construction project management, Energy Efficiency in Building, Passive design in building performance. Civil Structural Engineering: Earthquake Engineering, Finite Element Analysis, Structural dynamics, Concrete technology, Structural Engineering.

Major research facilities in the departments Environmental Engg., lab Facilities available 1. Well-equipped Environmental Engg. laboratory High volume sampler BOD trak apparatus (HACH) UV Spectrophotometer Atomic absorption spectrophotometer Gas chromatograph Multi-parameter monitoring instrument (Spectra lab) Indoor air quality monitoring equipment Concrete and Material Testing Lab: Structural Mechanics Lab: Study of stress strain behavior of Materials Structural Dynamics Lab: Computing Facilities Finite element based analysis and design Stadd-Iii Software For Integrated analysis And Design Star dyne For Static and Dynamic Analysis And Design Staad Pro-Software Strap Software Sap2000 And Etabs

Midas Civil And Gen Struds



4

2

2

1

99

Heat Power Thermal Engineering, Cryogenics, Production Engineering Mechatronics, Micromachining, Manufacturing, Design Engineering, Condition Monitoring, Industrial Engineering.

Power System Analysis, Operation, Control and Protection, Power Quality Issues, Power Electronics and Drives, High Voltage Engineering, Renewable Energy Sources, Control Systems, Adaptive and Optimal Control Systems, Non Liner and Digital Control Systems.

Computer Lab: Dell Optiplex PC, Internet facility Dynamics Lab: Four channel FFT analyzer with Dewesoft Software Quantitative Metallography Lab: Quantitative Metallography Lab Production Engg. Lab 3 axis CNC machine, Wire cut electro discharge machine Automobile Engineering Lab: Models of various systems of automobiles Renovation of HE Lab: Flooring and partition in between labs Heat and Mass Transfer Lab: Natural Convection heat transfer test rig, critical heat flux and boiling test rig Industrial Hydraulics and Pneumatics/Mechatronics Electro Hydraulic Trainer, Electro pneumatic trainer , Process Trainer and servo controller Power Electronics: Matrix Converter Diode clamped 5 Level Multi level Three phase Five-Level Cascade Multilevel inverter DSPACE ACE Kit Vector Controlled Induction Power systems Differential Relay Trainer Universal relay Test Kit SCADA system for TLS 08 Earth tester Transmission Line simulator Numerical Relay Development Environment Power Quality and Harmonics CRIO-9076 Integrated Controller and

Chassis System Thermal Imager SCOPEMETER 4 CHANNEL 100 MHZ COLOR Power Quality Analyzer DSPACE ACE Kit Control systems Twin Rotor MIMO (Helicopter model) Inverted Pendulum with cart Allen Bradley Micrologix 1100 plc Capacitive level Sensor Kit Piezoelectric level Sensor Kit



2

3

100

1

Digital Signal Processing, Electronic Communication Engineering, VLSI Design, Image Processing, Electronic System Design, Control Systems, Mobile Communication, Sensor Networks, Image Processing

Electronics Design and Automation Lab Embedded System & Microprocessor Lab Digital Design Lab Industrial Electronics lab Instrumentation & Control Lab Communication Laboratory

0

Artificial Intelligence, Pattern Recognition, Machine Learning, Databases, Data Mining, Networking, Image Processing, Network Security, High Performance Computing, Cloud Computing, Computer Vision, ToT, GIS, Big Data.

High Performance Computing Laboratory Research Laboratory PG – I and PG – II Laboratories Database Engineering Lab High Performance Computing

17.GOVT. COLLEGE OF ENGINEERING, AMRAVATI – 444 604 – AM NIRF Name and AICTE ID of the Institute

Ranking if any

Government College of Engineering, Amravati


No of PhD seats available (Supervisor wise)

Dr. S. P Tatewar

04

Dr. R. K. Rai

02

Civil

Dr. K.N. Kadam

01

Engg

Dr. S. N. Khante


05

Dr. A. I. Dhatrak

---

Research areas/ Specialization

Geotechnical Engineering, Water resources and Environment Engineering, Structure Engineering

04 06

Dr. R. S. Dalu

1-9598767

Thermal Engineering,

Mechanical Engg

Dr. A. M. Mahalle

04

Dr. A. G. Matani

03

Dr. V. N. Ghate

Nil

Electrical


Power System,

Engg

Control

101


All department are equipped with the latest software and latest equipment for research activity

18. GOVERNMENT COLLEGE OF ENGINEERING, AURANGABAD - GA


Government College of Engineering, Aurangabad, Station Road, Osmanpura, Aurangabad, Maharashtra Pin - 431 005


Nil





Dr. K. A. Patil

05

Civil Engineering- Water Resources

Dr. R. M. Damgir

06

Structural Engineering Transportation Engineering

Dr. P. A. Sadgir

01

Water Treatment, Waste water treatment, Environmental Engg.

Automatic Absorption, Spectrophotometer

Dr. D. G. Regulwar

04

Civil Engineering- Water Resources Engineering

Fluid Mechanics Lab., LINGO, MATLAB, SPSS Water GEMS, SEWER GEMS software.

Dr. P. B. Murnal

04

Structural Engineering Earthquake Engineering

Structural Dynamics & Earthquake engineering Base Isolation

Dr. R.S. Londhe

04

Structural Engineering Earthquake Engineering

Dr. S. S. Jamkar

08

Advanced Concrete Technology and Structural Analysis

Dr. M. G. Shaikh

08

Fracture Mechanics, FEA of structures, Ferrocement Structures

Civil Engineering


AICTE Id - 1-35681791

102

Government College of Engineering, Aurangabad,Station Road, Osmanpura,Aurangabad, MaharashtraPin - 431 005AICTE Id - 1-35681791

Government College of Engineering, Aurangabad,Station Road, Osmanpura,Aurangabad, MaharashtraPin - 431 005AICTE Id - 1-35681791

Nil

Nil

Electronics and Telecommunication

Dr. S. A. Bhalchandra

08

Concrete Technology Design of RCC/ Steel Structures

Dr. A. S.Bhalchandra

03

Signal and Image ProcessingCommunication Engineering

MATLAB & ANSYS software

Dr. A. R. Karwankar

02 (1-Open, 1 Reserved)

Image Processing Patern Recognition ANN

MATLAB & related toolbox.

Dr. V. R. Ratnaparakhi

01 (1-Reserved)

Signal and Image Processing

Dr. A G Thosar

Nil

Control systems, Renewable Energy Systems

Electrical Engineering Dr. V A Kulkarni

03

Electrical Power System

Dr. N.R. Bhasme

08

Applications of Power Electronics, Electrical Drive,

103

D-space, Data Acquisition Tools

Tri Brid Energy System, Photovoltaic system, High voltage AC/DC /impulse test set, MIPOWER, MATLAB S/W, Megger make oil testing kit, Power Quality Analyzer, Digital Storage Oscilloscope

Tri Brid Energy System, Photovoltaic system, High

Renewable Energy Systems, Special Machines

voltage AC/DC /impulse test set, MIPOWER, MATLAB S/W, Megger make oil testing kit, Power Quality Analyzer, Digital Storage Oscilloscope

19.INDIRA GANDHI INSTITUTE OF TECHNOLOGY, SARANG - IO


Indira Gandhi Institute of Technology, Sarang, Dhenkanal ,Odisha AICTE Permanent ID 1412736121


No


Civil Engineering


10



Dr. S.K Chand

1


Dr. M.K Dash

1


Dr. B.C. Panda

1


Dr. M. Moharana

1


Dr. P.K.Pani

1


Dr. T.K. Nath

1

Water Resources Engineering

Dr. G.K. Pothal

1


Dr. C.R.Sahoo

1


Dr. R.K. Kar

1

Transportation Engineering

104


1. Well equiped Laboratories 2.Centre for computational work



Dr. B. Tripathy

1

Construction Management

Dr. B.P Panigrahi

1

Electrical Machines and Drives

Dr. P. Das

1

Signal Processing/Image Processing/Soft Computing Techniques

Dr. L. N. Tripathy

1

Power System Protection/ FACTS devices/ DSP Application to Power System Protection

Dr. R. Behera

1

Power Systems Engineering

Dr. B. D. Sahoo

4


Dr. S. K. Senapati

3

Machine Design and Analysis

Dr. B. B. Choudhury

1

Production Engineering (Robotics)

Dr. N. C. Nayak

1


Dr. D. K. Behera

2


Dr. R. N. Sethi

2

Mechanical System Design

4

6

105

1. Computational lab equipped with all standard power system analysis software packages and MATLAB tool boxes 2. Power Electronics and Drives Lab

1.CVD Diamond laboratory, 2.Compsite Materials Lab. 3.CNC Machine lab 4.Robotics lab 5.Mechanical Measurement lab 6.Computerised Universal Testing machine 7.Machine Dynamics and Vibration analysis lab 8.Hydraulic machines Lab 9. Material testing and characterization lab 10.Thermal and Heat transfer lab

20. SANT LONGOWAL INSTITUTE OF ENGINEERING & TECHNOLOGY - SP



Sant Longowal Institute of Engineering & Technology (Deemed to be University) AICTE ID: AIC005117

IR-2-O-OE-U0384 (Overall) IR-2-E-OE-U0384 (Engineering )

QIP approved departments in the Institute As per AICTE Letter No.RIFT/QIP/Govt./2011 with santioned seats


02

Departmentwise no. of PhD supervisors

No. of PhD seats available (supervisorwise)

Seat Available as per UGC norms

Professor

09

Dr. Kulwant Singh, Prof.

5

Associate Professor

05

Dr. V. Sahni, Prof.

7

Assistant Professors

02

Dr. P.K.Singh, Prof.

4

Total

16

Dr. Rajesh Kumar, Prof.

7

Dr. Jagtar Singh, Prof.

4

Dr. A.S.Shahi, Prof.

4

Dr. R.K.Saxena, Prof.

2

Dr. Shankar Singh, Prof.

5

Dr. Pardeep Gutpa, Prof.

3

Dr. Arvind Jayant, ASP

1

106



• Welding • Metallurgy • Production and Industrial Engineering • Condition Monitoring • Design • CAD & CAM • Bio energy • Fuels and energy auditing • Manufacturing • Conventional and Non Conventional Machining • Thermal engineering

• Fatigue Testing Machine • UTM, 50kN • UTM, 400 kN • Corrosion Testing Machine • Microhardness Tester • Optical Microscope • Disc polishing machine • Stereozoom Macroscope • Wear Testing machine • Electrolytic etching machine • Specimen cutting machine • MIG welding machine • TIG welding machine • Impact testing machine • Lathe dynamometer • Micro plasma welding m/c • Submerged arc welding m/c • dry sand testing rig • Slurry abrasion test rig • Cryogenic treatment system • Jet Erosion test rig • Portable roughness tester • Data acquisition system (\vibration data) • Flue gas analazer • Micro processor based invertor GMAW m/c • Oxy-Acetylene metal surfacing torch • Submerged arc welder

Electronics and Instrumentation Engineering.

2

Dr. R.K. Yadav, ASP

5

Dr. Manoj Kumar Goyal, ASP

6

Dr. Indraj Singh, ASP

6

Dr. Jaspal Singh Gill, ASP

6

Dr.Sunil Kumar, AP

4

Dr. Vivek Kumar, AP

4

Dr. A.P.Singh, Prof.

2

Electronics & Communication Engineering Professor

4

Dr. J.S.Ubhi, Prof.

2

Associate Professor

3

Dr. Anupama Marwaha, Prof.

2


Nil

Dr. Surinder Singh , Prof.

4

Total

7

Dr. Ajaypal Singh, ASP

5

107

m/c • Micro-plasma 120 welding m/c

• Optical Communication & Networks• Photonic Sensor Design• Wireless Sensor Networks• Internet of things• Embedded Systems• Wireless Communication• VLSI Design• MANETs• RF, Microwave & Antenna Design• BioElectromagnetics• Radar Applications• Image Processing & Machine Vision• Intelligent System Design

• Color Camera and Monochrome Camera • NI Vision Development Module with Run Time Module• NI Vision Builder for Automated Inspection• Vision Camera Illumination System • NI ELVIS Trainer Kit• NI Educational lab (NI ELVIS II Hardware)• Data Acquisition Card• Motion Card• NI LabVIEW• Light Runner Optical Experimental Kit• Anechoic Chamber • OptiSim• FEMSiM• COMSOL• IE3D• HFSS• MATLAB • UNIVERSITY BUNDLE 3CADENCE SOFTWARE• H-SPICE• SYNOPSYS• MULTISIM• ORCAD• ORCAD P-SPICE• COMMSIM• MATHEMATICA• PROTEUS VSM• NI VISION• EDX signal pro with network design

Dr. Dilip Kumar, ASP

3

Dr. Lakhwinder Singh Solanki, ASP

5

Electrical & Instrumentation Engineering

Dr. J.S.Dhillon, Prof.

2

Professor

4

Dr. V.K.Jain, Prof.

4

Associate Professor

5

Dr. Sanjay Marwaha, Prof.

4


2

Dr. A.S.Arora, Prof.

3

Total

11

Dr. Manpreet Kaur, ASP

2

Dr. Sanjiv Singh, ASP

2

Dr. Manmohan Singh, ASP

5

Dr. Surita Maini, ASP

5

Dr.Praatibha Tyaig, ASP

6

Dr. Ashwani Kumar, AP

4

108

• Optimization Techniques • Power System Operations • Power System Optimization • Signal Processing Applications • Computer Visions • Biomedical Instrumentation • Optimization • Brain Computer Interface • Electrical Machines • Computational Electro Magnetic • Power System • Signal Processing of PQ Distribution • Process Control • Biomedical Image & Signal Processing • Signal & Image Processing • Power Quality Improvement in Electrical Systems • Renewable Energy Integration • Power Electronics and Drives • Biomedical Engineering • Energy Management

• Data Acquisition Cards

Food Engineering & Technology

2

Dr. Raj Kumar Garg, AP

3

Professor

8

Dr. P.S.Panesar, Prof.

1

Associate Professor

2

Dr. M.B.Bera, Prof.

6


Nil

Dr. D.C.Saxena ,Prof.

2

Total

10

Dr. C.S.Riar, Prof.

5

Dr. Sukhcharan Singh, Prof.

2

Dr. Vikas Nanda , Prof.

6

Dr. P. Kumar, Prof.

6

Dr. Kamlesh Prasad, Prof.

5

109

• Artificial Intelligence & Automation

• Bioprocessing of foods• Value addition of agro industrial by products.• Biocatalytic synthesis of prebiotics.• Development and characterization of biodegradable films• Development of nutraceutical foods using extrusion technology • Development of cereal and dairy based functional foods using honey.• Synthesis of starch nanoparticles materials and products.• Applications of nanotechnology in food processing.• Nondestructive approach in quality evaluation of foods.• Production of food enzymes

• Alveograph • Falling No. Apparatus• Pasta making Machine • Phase contrast microscope • Ice-cream Freezer• Water activity meter• HPLC system• Refrigerated Centrifuge• Gas Chromatograph • Lyophilizer • Autoclave• Sonicator• Atomic Absorption spectrophotometer • Texture Analyzer • UV – Visible Spectrophotometer• Color Spectrophotometer • PCR• Incubator shaker • Protein purification system• Ultrasonic bath• Fermenter• Viscometer (Brookfield) etc.• FTIR System• Differential Scanning Calorimetry • Colourtech• Texture analyzer system


2

Professor

Dr. Charanjiv Singh, ASP

2

Dr. Naveep Jindal, ASP

5

Dr. S. M. Ahuja, Prof.

7

4

Associate Professor

1

Dr. H.R.Ghatak, Prof.

3


4

Dr. Kamlesh Kumari, Prof.

7

Total

9

Dr. Puspa Jha, Prof.

8

Dr. Avinash Thakur, ASP

5

Dr. Nikhil Prakash, AP

5

Dr.A.S.K.Sinha, AP

4

Dr.Vinay Kumar, AP

4

Dr. Amit Rai, AP

4

110

• Waste Water Treatment• Bio Refinery• Paper Technology• Separation Processes • Bio Chemical Engineering• Industrial Pollution Control• Modelling & simulation of Chemical Processes (Supercritical Fluid Extraction)• Solid Waste Management.• Paper Manufacturing Composites• Modelling, Simulation & Optimization.• Kinetics Homogeneous Catalysis.• Polymer Technology,• Bioresource Technology• Waste Management & Recycling.• Alternate Sources of Energy.• Biopolymers – Utilization in Controlled Drug Delivery and Controlled Fertilizers Release.• Hydrogen Energy.• Advanced Oxidation

• FTIR(Fourier Transform Infrared Spectrometry) and• Thermo gravimetric Analyzer• Particle Size Analyzer• Fermenter• High Performance Liquid Chromatography(HPLC)• Bomb Calorimeter• Reflectance Meter• Orbital Shaker (2 nos.)• Cloud & Pour Point Apparatus• Lab Research Digester• Portable Biodiesel Plant

21. THE NATIONAL INSTITUTE OF ENGINEERING, MYSURU - NM


The National Institute of Engineering, Mysuru-570 008. and Permanent Id : 14878661

NIRF Ranking, If any

151 -200 Band

QIP approved departments in the Institute

Civil Engineering

Departmnet wise no of PhD Supervisors

11

No. of PhD seats available (QIP)

2

Research Areas / Specialization

Structural Engineering, Geotechnical Engineering, Water Resources and Environmental Engineering, Transportation Engineering, Remote Sensing and GIS

111


Facilities : The Department has special equipment such as 100T 70T 40T and 10T Universal Testing Machine, 50T Loading Frames, AIMiL 200T Stress Controlled Compression Testing Machine 300T Compression Testing Machine Non-destructive Ultrasonic Concrete Tester Cover Meter Corrosion Meter Distance Meter Windsor Probe Universal Tri-axial Testing Machine Standard Penetration Testing Equipment CBR Testing Machine Consolidation Probe HP Plotter Summa Graphics Digitiser and Electronic Total Station (9 Numbers) NISA Software STAD Software and E Tabs. Lab : Basic Material Testing Survey Hydraulics CAD Concrete & Highway Material Testing Geotechnical Engg. Environmental Engg. Highway Engg. Geology and Survey Museums Model Room Centre of Excellence :As part of its commitment to technological excellence, the Department has established three Centres of Excellence: Building Fire Research Centre (BFRC) Water Resources Centre (WRC) Centre for Conservation of Heritage Structures (CCHS)


Industrial & Production Engineering

5

6

2

Power System distribution, Voltage stability, Power System dynamics, FACTS, Distributed generation, SMARTGRID, Artificial Intelligence applications.

Facilities : The Department under TEQIP enhanced the facilities of the existing laboratories and set up a few state-of-the-art laboratories to meet the UG, PG and research needs. The Department has a Computer Centre with MATLAB MIPOWER, DigSilent P-Sim PSPICE and AUTOCAD Electrical software packages for study and analysis of large Power and Power Electronics systems. The High Voltage laboratory has been recognized as a testing centre by the Electrical Inspectorate, Government of Karnataka. Lab: Circuit Simulation and Measurements Electrical Machines Power Electronics Electrical CAD Control Systems Microcontroller Embedded Systems Relay and High Voltage Power System Simulation Electric Drives Power System Hardware Simulation. Centre of Excellence : Centre for Energy Management & Test Systems for Electrical Apparatus (CEMATEA)

2

Operations Management, Technology enabled education, metal cutting, Industrial Engineering and Management, Manufacturing, Mechanical and Wear characterization of advance composites

Facilities : The Department has established many laboratories which cater to the needs of UG, PG students and research scholars. Students and research scholars from other institutions are also utilising these facilities. Lab :Industrial Engineering Metrology Machine Tool CAD/CAM Software Application Composite Fabrication & Testing Centre of Excellence : Composite Material Fabrication and Testing Laboratory (CMFTL)

112

Computer Science and Engineering

6

2

Data mining, Cloud computing, Network security, Big data analysis and related fields.

113

Facilities : The Department has 6 spacious computer centres with more than 200 latest computers and software. A campus-wide networking facility connects all the departments, hostels, office and golden jubilee block. 10 different servers including middle range servers are running on the LAN. Lab :Data Structures Logic Design Oops with C++ Algorithms Microprocessor Computer Networks Java & CGI Programming OperatingSystems Browsing Centre Language Cloud Computing

22.VEERMATA JIJABAI TECHNOLOGICAL INSTITUTE, (VJTI) MATUNGA MUMBAI MAHARASHTRA 400019 - VM


Veermata Jijabai Technological Institute, Mumbai AICTE Permanent ID 1-5149491



Mechanical Engineering 95

Civil Engineering




Dr. N.P. Gulhane

2

Heat Transfer, Fluid Mechanics, Micro fluidics, Solar Thermal

Dr. S.S.Naik

4

Structural health monitoring, Dynamics

Dr. P.M. Karande

3

Industrial Engineering, Operations Research, Multicriteria decision making, Multi-objective optimization, Material section, Non-traditional machining selection

Dr. H.P. Khairnar

3

Tribology, Automobile Engineering

Dr. V.B. Suryawanshi

2

Design and manufacturing of composite Materials, Finite Element analysis, Polymeric nano-composites, Molecular Dynamics Simulation

Dr. M.V. Tendolkar

1

Cryogenics, Refrigeration and air-conditioning

Dr. A.S. Rao

2

Rapid Prototyping, Automation, Robotics, Computer Integrated Manufacturing

Dr. A.V. Deshpande

1

Fluid Dynamics, Gas Dynamics, Computational Fluid Dynamics

8

Dr. Prashant Bhave

3

114

Environmental Engg


Technical Excellence Centre equiped with 5-axis robot arm, CMM, Rapid product development, 3D printing etc Tribology centre, Machine Dynamics and Vibration,Fault simulator with IoT platform Bhabha Automic Research Centre (BARC) funded Computational Fluid Dynamics Facility, Centre of Excellence in Complex and Non linear Dynamical System

Mercury Analyser , Noise Level Meter ERDAS software ABAQUS Software Basic Experimental Facility for 3D

Dr. K. K. Sangle

3

Stability and Seismic Analysis of Cold Formed Steel Structures, Capacity Based Design of High Rise RCC and Steel Structures, Nonlinear Analysis of High Rise RCC and Steel Structures, Progressive Collapse of High Rise RCC and Steel Structures

Dr. V. B. Deshmukh

4

Earth Pressure, Earth anchors, Ground Improvement Techniques, Foundation Engineering

Dr. S. S.Pendhari

4

Composite Material, Smart Materials, Computational Mechanics, Repairs and Rehabilitation of Structures

4

Environmental Engg

Dr. N M Singh

4

Non-linear control system, dynamical systems, optimization

Dr. S J Bhosale

4

Cell. Experimental Stress Analysis Lab Advanced Earthquake Analysis Research Lab

Dr. Vikas Varekar

RF systems, microwave link design, optics & photonics, IOT, satellite comm. Platforms / protocols, routing & networking


Textile

4

Dr. S R Wagh

1

Stability and control in complex networks, microgrid

Dr. S. P.Borkar

8

Textile Composites, Technical Textiles, Coated &

115

dSPACE, Hardware -in-loop system

Speciality Yarn making facility

Manufactures


Laminated Textiles.

4

Dr. V. D.Gotmare

6

Fibre modification, Sustainable textiles, Nanotextiles and Nanomaterials.

Dr. S. Gangopadhyay

4

Geo-Textiles, Smart Textiles, Protective Textiles.

Dr. N. Mehra

3

Textile Chemical Modification and Value addition, Advances in Finishing, Nanotechnology application on textile materials.

Dr. R D Daruwala

3

Computer Architecture, Embedded Systems, Industrial IoT, Fog computing

Dr. R N Awale

5

Adhoc sensor networks, antenna, Biomedical image

Dr. F S Kazi

3

Cyber-physical systems, smartgrid, microgrid

Dr. D P Rathod

3

wireless communication,coding theory,IOT

116

Sample Rapier loom Melt spinning facility. Medical Textile finishing and testing facility Conductive Textile Characterization facility Advanced chemical finishing facility Coating –Laminating unit Composite Machines and Testing facilities CAD-CAM Facility

Sensors for IOT, IOT hardware, FPGA boards, EEG and EMG setup , dermo setup. Hardware-in-loop platform, microgrid testbench

23.POONA COLLEGE OF PHARMACY, BHARARTI VIDYAPEETH (DEEMED-TO-BE-UNIVERSITY), PUNE-411038 - PC Name and AICTE ID of the Institute

Poona College of Pharmacy, Bhararti Vidyapeeth (Deemed-to-be-University), Pune-411 038 AICTE ID: AE2966831





Dept. of Pharmaceutics

4

Dr. V. B. Pokharkar - 1 Dr. A.P. Pawar - 1 Dr. R. N. Kamble - 1 Dr. C. Bothiraja - 1 Total seats avilable : 04

Dept. of Pharmacognosy

2

Dr. A. G. Namdeo -1 Dr. V. M. Shinde - 1 Total seats avilable : 02

11

117

Research areas / Specialization


Novel drug delivery systems such as CRDDS. Nanotechnology based DDS. Pre-formulation, Solubility and oral bioavailability enhancement using various techniques. Application of Quality by Design (QbD) in drug development. Targeted nanoparticles for anticancer DDS. Intranasal drug delivery systems for CNS disorders. Nutraceutical and Cosmeceutical DDS. Pharmacokinetic and Pharmacodynamic studies. Crystal engineering and Particle engineering

Andersen Cascade Impactor Ball Mill, Centrifuge Dissolution apparatus Electrospin Electronic weiging balance Hot Air Oven High preesure homoginizer Hot plate, Lyophilizer Microfludizer Malvern Mastersizer Magnetic stirrer Photo stability chamber pH meter, Rotary Shaker Rotary Evaporator Rotary tablet machine Stability Chamber Spray dryer, Ultrasonicator

Pharmacognosy, Natural Products, Herbal Drug Technology, Herbal formulation, Medicinal Plant Biotechnology

Culture rooms, HPLC, HPTLC, Rotary Evaporator, Soxhlet extarction, Sonicator, Orbital Shaker, Cell Counter, ELISA

Dept. of Pharmacology

Dept. of pharmaceutical chemistry

2

Dr. Arulmozhi.S - 1 Dr.S.L.Bodhankar- 1 Total seats avilable : 02

Inflammation, neurodegenerative disesases, Metabolic diseases, Cardiovascular and Diabetes mellitus

Facilities for Inflammatory studies Plethysmometer, Analgesiometer, Facilites for Cardiovascular system Langendorff's apparatus, 4-channel Biopac, 8-channel powerlab with data acquisition system, mazes for central nervous and neurodegenerative diseases study, Molecular studies by PCR, stereomicroscope, Phase separation, Inverted microscopes, CPCSEA registered animal house, Metabolic cages, Stereotaxy

6

Dr. S. S. Kadam -1 Dr. K. R. Mahadik -1 Dr. J. R. Rao -1 Dr L Sathiyanarayanan -1 Dr. V. M. Kulkarni -0 Dr. S. Y. Gabhe -0 Total seats avilable : 04

Analytical method development and Validation. Natrual product reserch. Qualitative, quantitative analysis of hebal products. Synthetic /Medicinal Chemistry, Pharmaceutical Analysis.

Elemental analysis, Combinatorial synthesizer, Rotary evaporator, LCMS,ICP-MS,GC-MS, Preparative HPLC, Manual HPLC, PDA HPLC, HPLC with Autosampler, UVspectrophotometer, FTIR

118

Dept. of Quality Assurance Techniques

6

Dr. K. R. Mahadik -1 Dr. V. B. Pokharkar -0 Dr. S. S. Kadam -0 Dr. A.P. Pawar -0 Dr. R. N. Purohit -0 Dr. J. R. Rao -0 Total seats avilable : 01

Dept. of Biotechnology

1

Dr. A. M. Harsulkar -1

2

Dr L Sathiyanarayanan -0 Dr. A. P. Pawar-1 Total seats avilable : 01

Dept. of Pharmacy practics

119

Analytical method development and Validation. Application of Quality by Design (QbD) in drug development. Qualitative, quantitative analysis of drug product.

Ball Mill, Centrifuge Dissolution apparatus Electronic weiging balance Hot Air Oven High preesure homoginizer Hot plate, Lyophilizer Microfludizer Malvern Mastersizer Magnetic stirrer Photo stability chamber, Rotary evaporator, LC-MS,ICP-MS,GC-MS, Preparative HPLC, Manual HPLC, PDA HPLC, HPLC with Autosampler, UV-spectrophotometer, FTIR

Nutraceuticals, Osteoarthritis, Diabetes

Molecular Biology Set up, Gene Cloning, PCR

1. Therapeautic drug monitoring of antituberculars and antiepileptic drugs: 2. Genomic study of antitubercular drugs resistance 3. Therapeutic Drug Monitoring of cytotoxis drugs

LCMS and HPLC CMIA:chemiluminescent immunoassay MTX kit and Control Callibrators

24.DELHI INSTITUTE OF PHARMACEUTICAL SCIENCES AND RESEARCH - DI








1. CHN Analizer 2. HPLC

1.Prof. D.P. Pathak

2

Drug design, synthesis and pharmacological evaluation of fatty acid derivatives, oxadiazole and benzoxazole derivatives

3. Parallal reaction station 4. Microwave Synthesizer 5. Work Station for Drug Designing 6. ATIR 7. Spectro Photo Meters (UV-Flouri) 8. DSC 9. Supercritical Fluid Extractor

Pharmaceutical Chemistry Delhi Institute of Pharmaceutical Sciences And Research

2. Prof. S. R. Wakode

th

19 Rank

3. Dr. R.B. Bodala

Pharmacology

1. Dr. Rajani Mathur

3

Drug design, synthetic and phytochemistry, Quality Assurance & Qualitiy Control

3

Plant Cell Culture, Drug design, synthetic and phytochemistry, Quality Assurance & Qualitiy Control

2

Evaluation of Drugs for Cancer, Metabolic Syndrome, Diabetes and its complications (Retinopathy Nephropathy) Cardiomyopathy, Catract

120

10. Digital Balances with warring capacity

11. Rota Evapartor with Chillar

1. Fundus camera 2. Lyophilizer 3. Western blotting apparatus 4. Langendorff assembly

& Glucoma, Cell Cultre and its Molecular Mechanisms.

5. Elisa reader 6. Non-invasive-BP Apparatus (Rat & Mouse) 7. Leminar Flow hood 8. Incubator 9. Inverted microscope 10. Invasive BP and ECG Apparatus 11. Ussing Chamber with Power Lab Recorder 12. Radnoty Isolated Tissue Expt. 13. Deep Freezer (-20 & - 0 C 14 Semi Auto Analyzer 1. Backman coulter counter 2. Capsule filling machine 3. Coating and polishing machine 4. Cooling centrifuge 5. Digital balance 6. Disintegration apparatus

Parmaceutics

Prof. P.K. Sahoo

2

drug delivery Nano Particle Topical & Ocular Method development and validation for bulk drug and formulations.

7. Dissolution apparatus 8. Vlife QSAR software 9. Friability test apparatus 10. High pressure homogenizer 11. HPLC 12. High shear homogenizer 13. Inverted microscope 14. Zetasizer 15. Stability chamber

121

Dr. Meenakshi Chauhan

2

122

drug delivery-Nano Particle Topical Ocular, Peptide. Vesicular,/ Particulate.

16. Rotary tablet punching machine

25.JSS ACADEMY OF HIGHER EDUCATION & RESEARCH, MYSURU- JSS COLLEGE OF PHARMACY, OOTY - JS Name and AICTE ID of the Institute

JSS College of Pharmacy, Ooty AICTE Institute Permanent ID: 1-10037341


15th Rank



· Pharmaceutics

· Pharmaceutics: 07

· Pharm. Chemistry

No of PhD seats available (supervisor wise) See Annexture I


Pharmaceutics: · Nanotechnology, Herbal Formulation, Customized Drug Delivery

· Pharm. Chemistry: 07

· Mucosal Drug Delivery Systems · Phamacognosy

· Phamacognosy: 03

· Nanoemulsions

· Pharmacology

· Pharmacology : 03

· Oral/ Sustained release formulations

· Pharm. Analysis

· Pharm.Analysis: 03 · Lipid based drug delivery systems

· Pharm. Biotechnology

· Multi-particulated drug delivery systems

· Pharm. Biotechnology: 01

· Scaffolds for diabetic foot ulcer

123


· Pilot Plant for Tablet Technology · Lyophilizer · Differential Scanning Calorimetry · High Performance Liquid Chromatography · High Pressure Homogenizer · Stability Chambers

Pharm. Chemistry: · Schrodinger Maestro 11.3 · Structure based design and evaluation of antibacterial drugs.

· Accelery Discovery studio 4.1

· Targeting MurD and MurE enzymes. · Design and evaluation of Delta-carboline as antineoplastic drugs. Pharmacognosy: · HPTLC · Screening of medicinal plants of Nilgiris Biosphere · Gas Chromatography · Development of Standardization protocol for herbal formulation · Vacuum Freeze Dryer · Flash Chromatography · Isolation characterization of lead molecules. · Lyophiliser

Pharmacology

· CPCSEA approved animal house · Cancer research, Diabetes research, Neuropharmacology research, Phytochemistry, Drug · LCMS/MS Design & Synthesis, Nano-formulations. · CPCSEA approved animal house · RT-PCR, Small animal imaging system, · Metabolic disorders Neuro-pharmacology · Tecan ·Multi LCMS/MS detection microplate reader · Neuroinflammation Neurodegenerative · Rodent· Stereotaxic apparatus disorders RT-PCR, Small animal imaging system, · Power Lab-physiological data · Tecan acquisition systemMulti detection microplate reader

124

· Autoanalyzer · Rodent and Stereotaxic Cell analyzer apparatus

· Power Lab-physiological data acquisition syste

Pharm. Analysis:

·

Pharmaceutical and food Analysis

LC-MS 2020

HPLC with UV Detector (pling unit)

· Stress degradation studies of pharmaceuticals and food analysis HPLC with PDA Detector (Manual Injector) · Impurity profiling and genotoxicity studies ofAgilent HPLC with UV Detector (Manual Injector) – 02 impurities in pharmaceuticals UV Visible spectrophotometer (1700) FT-IR 8400s Atomic Absorption Spectrophotometer 6300 Pharm. Biotechnology:

Infectious Diseases Biology/Microbiology Natural product based drug discovery towards Cancer Definition Biology

· Cooling Centrifuge - 200 C High speed 20,000 rpm.

· CO2 Incubator · Phase contrast Fluorescent microscope · Deep freezer (-85oC) · Laminar air flow system

Pharmacy Practice: Community Pharmacy Research Social and administrative Pharmacy

Class II type A/B3 · Laminar flow system (vertical)

· Laminar flow system (horizontal) · Millipore RO water purification Area of research Cognitive Neuroscience and quality system of life. · Electro blot transfer Precision medicine using Pharmacogenetics/ Pharmacometrics approaches

125

Transilluminator & Electrophoretic system for PAGE · PCR Machine

· DNA sequencer Development and validation of Psychometric research · Biomate-5 instruments Prediabetes and type 2 diabetes

126

26.JADAVPUR UNIVERSITY (PHARMACY) KOLKATA, WEST BANGAL - JV








Drug Delivery and Drug Targeting. Pharmaceutical Formulation Designing. Probiotic Delivery Herbal Drug Research, 1-21569051

Pharmacy

5

Synthesis & Natural Product Research on Anticancer & antdiabetic Drugs. Pharmaceutical Chemistry, Pharmaceutical Technology (Natural Product Studies). Pharmacology & Toxicology

127


27.DEPARTMENT OF PHARMACEUTICAL SCIENCES & TECHNOLOGY B.I.T. MESRA, RANCHI

S.No.

Name of the Supervisor

Designation

Specialization

- BI No. of current Ph.D Scholars in the Institute

No. of current Ph.D Scholars outside the Institute

(Full Time)

(Part Time)

No. of seats available

1

Dr. P.R.P. Verma*

Professor

Pharmaceutics

1

1

6

2

Dr. B.N. Sinha*

Professor


3

0

5

3

Dr. S. Samanta*

Professor & Head


2

1

5

4

Dr. S. Jha*

Professor

Pharmacognosy

1

0

7

5

Dr. R.N. Gupta*

Professor

Pharmaceutics

0

0

8

6

Dr. (Ms.) S. Ganguly

Professor


1

1

6

7

Dr. K. Jayaram Kumar

Professor

Pharmacognosy

1

1

6

8

Dr. (Mrs.) P.M. Mazumder

Professor

Pharmacology

3

0

5

9

Dr. (Mrs.) S.M. Verma

Professor


0

0

8

10

Dr. Venkatesan J.

Associate Professor


3

0

5

11

Dr. A. Patnaik

Associate Professor

Pharmacology

0

0

8

12

Dr. Manik

Assistant. Professor


3

0

2

13

Dr. Abhimanyu Dev


Pharmaceutics

1

0

4

14

Dr. (Mrs). Trishna Bal


Pharmaceutics

1

0

4

15

Dr. (Mrs.) Anima Pandey


Pharmacognosy

0

0

5

128

16

Dr. Sandeep Kumar Singh


Pharmaceutics

1

0

4

17

Dr. (Mrs.) Neelima Sharma


Pharmacology

0

0

5

18

Dr. Animesh Ghosh


Pharmaceutics

2

0

3

19

Dr. Kishanta Kr. Pradhan



1

0

4

20

Dr. S. Banerjee


Pharmacology

1

1

3

21

Dr. B. Sarkar


Pharmaceutics

1

0

4

22

Dr. S. P. Pattanayak


Pharmacology

2

0

3

*

Will be superannuated within 5 years.

Equipment available with the Department: Sl. No. 1 2

Equipment(s) Available

Quantity available

Supported by

Field Emission Scanning Electron Microscope (FESEM) (Zeiss) High Performance Liquid Chromatography (HPLC) (Waters)

01 01

3

High Performance Liquid Chromatography (HPLC) (Knaur)

01

FIST, DST UGC SAP UGC SAP

4

Differential Scanning Calorimeter (DSC) (Shimadzu)

01

5

Differential Scanning Calorimeter (DSC) (Perkin Elmer)

01

6

Thermogravimetric analyzer (TGA) (Perkin Elmer)

01

7

Fourier Transform Infra Red Spectrometer (FTIR) (Shimadzu)

01

8

UV-Vis Spectrophotometer (Shimadzu)

03

9 10 11 12 13 14 15 16 17

Viscometer (Malvern) Ultracentrifuge (Beckman Coulter) Probe Sonicator (Bandelin) Dissolution Apparatus (Electrolab) Planetary Ball mill (Fritsch) Fluidized bed processor (ACG) R & D Coater (ACG) Spray dryer (Lab Ultima) High Performance thin layer chromatography (HPTLC)

01 01 02 06 01 01 01 01 01

129

UGC SAP Sponsored project (Individual Centric) Sponsored project (Individual Centric) UGC SAP UGC SAP Institute Institute Institute Sponsored project (Individual Centric) Sponsored project (Individual Centric) Institute Institute Institute UGC SAP

18

Various licensed software for CADD

19 20 21 22 23 24 25 26 27 28 29 30

Western Blot Assembly (Biorad) PCR (Eppendroff) Multimode Plate Reader (Molecular Devices) Micro centrifuge (Eppendroff) Bench top refrigerated Centrifuge (Eppendroff) Bench top refrigerated incubator shaker (Eppendroff) Parallel synthesizer (Radleys), (Metler Toledo) Lyophilizer Flash Chromatography (Buchi) Preparative Chromatography (Agilent) Rota-evaporator Digital Melting point apparatus (Optimelt, SRS)

Dedicated lab for computer aided drug design work. 02 02 01 02 01 01 03 01 01 01 03 01

UGC SAP Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric) Sponsored project (Individual Centric)

Major Equipment(s) available with the Central Instrumentation Facility (CIF) utilized by Pharmaceutical Sciences and Technology Department: Sl. No. 1 2 3

Equipment(s) Available

Quantity available

Supported by

NMR 400 MHz LCMSMS ICPMS

01 01 01

4

SEM

01

FIST, DST Govt. of Jharkhand TEQIP Phase I TEQIP Phase I

5

AFM

01

6

Zetasizer

01

7

XRD

01

8

Single Crystal XRD

03

9

HPLC

01

10

Gel Permeation Chromatography (GPC)

01

11

High Performance Computing facility (HPC)

01

  

TEQIP Phase I TEQIP Phase I TEQIP Phase II TEQIP Phase II Institute TEQIP Phase I Institute

Department of Pharmaceutical Sciences and Technology has CPCSEA approved animal house facility to conduct the experiment(s) on animals as per the CPCSEA guidelines. Department of Pharmaceutical Sciences and Technology has well equipped In Vitro cell culture laboratory for molecular biology experiment(s). Department of Pharmaceutical Sciences and Technology has 10 acres of medicinal plant garden and volatile oil extraction unit.

130

28.MANIPAL COLLEGE OF PHARMACEUTICAL SCEINCES, MAHE - MC


Manipal College of Pharmaceutical Sceinces, MAHE, Manipal Institute ID 1-4314673



Research areas/ Specialization

Ist Rank 2015

Dr G Gautham Shenoy

1

Drug Discovery

7th Rank 2016

Dr B S Jayashree

1

Anti cancer drug discovery

Dr Suvarna G Kini

1

Molecular Docking Synthesis and biological screening of activity anticancer, Anti TB

Dr Jessy Elizabeth Mathew

1

Drug design & synthesis of molecules of molecules for anti cancer studies



Pharmaceutical Chemistry 7th Rank 2017

131


The focused research areas of the faculty members of the department are development of new chemical entities for the treatment of cancer, diabetes, tuberculosis, inflammation, and hypertension. The department is successful in getting financial support from various funding agencies like DBT, DST, AICTE and ICMR. The department has necessary infrastructure to carry out the research work and faculty members are actively engaged in research in collaboration with sister departments of the college. MAHE has purchased full-fledged Schrodinger software which includes Biological suite as well as Material suite. Department of Pharmaceutical Chemistry will be signing MoU with Schrodinger for the establishment of Centre for Molecular simulations which is one of its kind MoU being signed by Schrodinger with any academic institute in India. Faculty members, research scholars and postgraduate students will be trained in the area of molecular simulations. A four day training program was conducted by Schrodinger application scientists in the month of October 2017. Further training programs are also in the pipeline. Certificate program in Drug Discovery will also be introduced by the department soon. Also a workshop in the area of Drug Discovery will be organized for the benefit of faculty members and PG students of sister institutions. Department of Pharmaceutical Chemistry has embarked upon an ambitious project of developing new chemical entities for diseases like cancer, infectious diseases, metabolic disorders. The study will be carried out in the Molecular Simulation Centre to design new chemical entities. DRILS and MAHE in principle have agreed to develop jointly. New chemical entities and MOU will be signed in the near future.

Dr Varadaraj Bhat G

1

Drug design and synthesis Drug testing and analysis

Dr Alex Joseph

1

Drug desing and synthesis and Anticancer and Anti diabetic studies

Dr C Mallikarjuna Rao

1

Pharmacology, wound healing, diabetics and oncology

Dr Sreedhara Ranganath Pai K

1

Cancer biology metabolic disorder

Dr Nandakumar K

1

Anticancer and Neutoprotective(chemobrain)

Dr Rekha R Shenoy

1

Wound healing. Pharmacokinetic study in animals

Dr Yogendra Nayak

1

Redox signoling

Pharmacology

132

The Department of Pharmacology, one of the core departments of MCOPS, is actively involved in post-graduate teaching and research. Ably aided by a committed faculty and supported by a robust infrastructure, the department has been imparting quality education in pharmacology at the undergraduate (B Pharm), post graduate (M Pharm) and doctoral levels. The laboratories are well equipped with some very sophisticated instruments. A fully air-conditioned animal house (Central Animal Research Facility) supplies the animals for all experimentation. The research output from the department has been impressive, which has helped it secure further financial assistance from funding agencies like DST, DBT and AICTE. The course content for MPharm programme in pharmacology has Advanced Pharmacology, Pharmacological and Toxicological Screening Methods, Cellular and Molecular Pharmacology, Principles of Drug Discovery and Clinical Research and Pharmacovigilance. The department also offers some of the specialized elective courses such as Research Methodology and Biostatistics, Cancer Biology, Free Radical Biology and Medicine and Screening methods for drug development for postgraduate students. The practical work for the students is a wholesome mix of traditional pharmacology and modern research techniques. The students become well acquainted with the handling of experimental animals and use of sophisticated instruments. Hence they find it easy to take up challenging work in industries when the opportunities arise. The department has some thrust areas of research. These include screening of molecules for neurological disorders, cancer, diabetes, dyslipidemia and wound repair. A number of research publications come out of the department every year in reputed national and international journals. There have been a number of interactions with industries such as Ocius Life Science, Quintiles, Syngene, Biocon, Paraxel, Dr. Reddy‟s in the form of execution of project work as well as placement. Another facet of the department‟s achievement has been the tie-up in research it established with Griffith University, Australia. Currently

Dr Anoop Kishore

1

Metabolitic disorders, Inflammation Biology

Dr Jayesh Mudgal

1

Neuro inflammation and Diabetics

Dr Madhavan Nampoothiri

1

Pharmacology of neurodegenerative disorders

Dr Nitesh Kumar

1

Cancer biology and mood disorders

Dr M Sreenivasa Reddy

1

Formulation development

Dr K B Koteshwara

1

Formulation and Development

Pharmaceutics

133

doctoral and postgraduate students are pursuing their research work in collaboration with Griffith University. Apart from publications and grants, this collaboration has fetched the Australian endeavour fellowship (Post-Doc) for the doctoral student to pursue the Post-Doc research in Australia. Department of Pharmacology is fully geared to take up the responsibilities of 21st century teaching and research.

The Department of Pharmaceutics is equipped with state-of-the-art laboratories, sophisticated instruments and competitive staff. The department has two MPharm specializations (Pharmaceutics and Industrial Pharmacy). The focused research areas are: i) Preformulation studies, ii) Development of different dosage forms, iii) Evaluation of dosage forms for various in vitro and in vivo parameters and iv) Studying biopharmaceutical and pharmacokinetic aspects.

Dr Srinivas Mutalik

1

Pharmaceutics, Novel Drug Delivery, Nanotechnology, Development and, in vitro and in vivo evaluations of various novel drug delivery systems, Transdermal drug delivery, oral controlled drug delivery, dendrimers, liposomes, nanoparticles, microspheres, sunscreen products, targeted drug delivery, polymer grafting, etc

Dr Shaila Angela Lewis

1

Nanoparticulate Drug Delivery Cyclodextime formulation

1

New approaches in existing formulations, Combination drug product/bilayered dosage form, Formulation development

1

Novel Drug DeliveryNanopharmaceuticals (liposomes, solid lipid nanoparticles), Bioavailability Enhancement: Nanoemulsions, Nanocrystals, Oral Controlled Drug Delivery

Dr Mahalaxmi Rathnanand

Dr Usha Yogendra Nayak

134

Core research competencies are: Multi-particulate systems, sustained Immediate release systems, ocular drug delivery systems, transdermal systems, implants, semisolid, dental preparations, microspheres, nanopharmaceuticals (nanoparticles, liposomes, SLNs, NLCs, dendrimers, etc.). Center for Drug Delivery Technologies established under this department is equipped with cutting-edge Twin Screw Processor of Steer Engineering, Bangalore. The department has received enormous funding for research projects from various agencies like DST, DBT, AICTE, ICMR, BIRAC, VGST and many pharmaceutical companies. The department has marked its importance in research in terms of many publications in top journals and 8 patents. It has set up research collaborations with several institutes, universities and companies.

Pharmacognosy

Dr Anup Naha

1

Formulation development Novel drug delivery

Dr Girish Pai K

1

Ophthalmic drug delivery. NDDS

Dr Vamshi Krishna T

1

Novel Drug Delivery Systems, Biopharmaceutics and Pharmacokinetics, Biomedical Vibrational Spectroscopy

Dr Lalit Kumar

1

Nanoparticulate drug delivery system

Dr M Manjunatha Setty

1

Pharmacognosy and Phytochemistry, Screening of natural products

Dr H N Aswatha Ram

1

Herbal formulations

Dr Chandrashekar KS

1

Pharmacognosy and Phytochemistry, Standardization of Herbal drugs, Isolation of phytocconstituets

1

Pharmacognosy and Phytochemistry, Pharmacologyical screening of natural products, Herbal formulations

Dr Richard Lobo

135

Pharmacognosy is probably the oldest of the modern sciences that involves the study of the physical, chemical, biochemical and biological properties of natural drugs, including the search for new drugs from natural sources. The subject is one of the core branches in the pharmacy curriculum and therefore found an important niche in the Manipal College of Pharmaceutical sciences as a coveted department. The department enjoys the reputation of being one of the most sophisticated and well equipped department in the country. It is accredited by all the major regulatory bodies in India. The department was established in 1971. The strength of the department lies in its modern labs, sophisticated instruments and high quality research output. The department has produced about 160 post graduates and 16 PhD scholars who are enjoying impressive positions in industry and academia. About 300 publications in the journal of national and international repute with good impact factor testify the quality research output of the department. Academic credibility of the department of Pharmacognosy is envisaged by its changing curriculum to meet the current requirements of pharmaceutical Industry. The department offers extensive training in all aspects of natural products including latest developments in the scientific field. Herbal product development, drug discovery & development from natural products, development of nutraceuticals, dietary supplements and cosmeceuticals, herbal IPR and herbal drugs patenting are the focused key areas of the department. The alumni of our department and their positions in the industry and academia speak about the employability of our students.

Pharmacy Practice

Dr Saleemulla Khan

1

Ethnomedicine, Ethnopharmacology, Screening of Herbal drugs for Pharmacological activity, Standardization of herbal drugs

Dr Mahadev Rao

1

Pharmacogenous Clinical research oncology - precision

Dr Sreedharan

1

Pharmacy practice management

Dr Leelavathi D Acharya

1

Pharmaceutical care, Hospital pharmacy

Dr M Surulivel Rajan

1

Pharmacometrics precision dosing pharmacokinetics

Dr Vijayanarayana K

1

Pharmacokinetics drug utilization clinical pharmacy practice

136

The Department of Pharmacy Practice of MCOPS, established at Kasturba Medical College Hospital (2032 bedded), Manipal in 2001, specializes in clinical pharmacy services such as drug and poison information, patient counselling, adverse drug reaction monitoring and medication therapy management. The department has a very good track record of providing above services to the inpatients and public. To cater the increased demand of clinical pharmacy services to the society, the department activities are extended to four other constituent hospitals of MAHE (KMC Hospital, Mangalore; Dr TMA Pai Rotary Hospital, Karkala; Dr. TMA Pai Hospital, Udupi and Manipal Hospital, Bangalore). The expanding roles of our department include the application of evidence based medicine towards patient safety, pharmaceutical care, clinical research in disease management, community out-reach program and continuing pharmacy education programs.We also have expertise in diverse areas such as Medication review, Patient safety programs, Pharmacometrics, Clinical toxicology, Antibiotic stewardship, Assessment of evidence for therapeutics etc. Our faculty members and students are trained in Pharmacovigilance Programme of India (PvPI) under Indian Pharmacopoeia Commission and ICMR sponsored antimicrobial stewardship program to meet our nation's goal in healthcare. The department conducts annual events such as International Clinical Pharmacy Conference (CPCON), PK.PD and clinical skill development workshops to provide national wide training and education in pharmaceutical care. The department runs the 'Centre for Toxicovigilance and Drug Safety' established under MAHE as one of the Centres of Excellence. The department is equipped with software packages such as SPSS, WinNonlin. Phoenix and MedCal; and drug information resources like Micromedex to provide evidence-based information to the society.

Pharmacy Management

Dr R Rajesh

1

Pharmacovigilance in HIV research, medication adherence

Dr Rajesh V

1

Patient safety and clinical pharmacy practice

Dr Girish Thunga P

1

Health IT clinical toxicology Epiobiology

Dr Sonal Sekhar M

1

Metabolic disorders and infectiotious diseases

Dr D Sreedhar

1

Drug regulations, Fixed dose combinations, Pharmaceutical Marketing, Pharmacoeconomics

137

Pharmacy Management is a branch of pharmacy that deals with the business part of pharmaceutical sector. Pioneers in establishing the specializations both Pharmaceutical Administration and Pharmaceutical Marketing. Pharmaceutical Administration is first of its kind in India and one of the oldest branches with top class infrastructure facilities with interactive digital board and well-qualified faculty members. Adjunct Professors are from US and Europe apart from top notch from India. At undergraduate level the department deals with distinctive subjects viz., Communication Skills, Environmental Science, Pharmaceutical Management and Pharmaceutical Jurisprudence. It is a vital branch which trains the students in Administration and Marketing aspects at postgraduate level. Subjects include, Principles and Practice of Business Management, Principles and Practice of Pharmaceutical Marketing, Disease Management, Drug and Device Regulation, Intellectual Property Rights, Managerial Economics, Financial Management and Entrepreneurship Development. The discipline is also expanding to encompass many aspects of health care viz., Pharmacoeconomics, Pharmaceutical care etc. Students have occupied top positions in the companies and contributing for overall growth. There are many career opportunities currently and many more evolving. Pharmaceutical industry is on a lookout for the people with advanced training in Pharmaceutical

marketing and administration. Students are placed in reputed pharmaceutical and allied companies while doing their project work itself. A few areas where students are placed in the past are viz., Business Development, Product Management, International Marketing, Medico. Scientific Marketing, Medical Affairs, Regulatory Affairs, Clinical Research, Intellectual Property Management, Business Analytics, Human Resource Management, Sales Management, Advertisement Management and Academics. Research areas include Pharmaceutical Marketing, Patents, Drug Regulations, Cosmeceuticals, Nutraceuticals, Pharmacoeconomics, Pharmaceutical Care, Pharmacovigilance of Herbal Drugs, Consumer Behavior, Human Resource management. Consultancy services also provided in pharmaceutical marketing, regulatory affairs, patents etc., Overall, it is job oriented and a challenging branch. Dr Manthan D Janodia


Dr Krishnamurthy Bhat

1

Intellectual Property Rights, Pharmaceutical Marketing, Social media & Health care

1

Crysta engineering, Analytical, Bioanalytical and Stability indication method development and validation

138

Department of Pharmaceutical Quality Assurance is one of the wellknown departments of the college. It runs two Post Graduate programs i.e. MPharm in Pharmaceutical Quality Assurance and MPharm Pharmaceutical Regulatory Affairs with an intake of 15 each along with few subjects for undergraduate and PharmD. Department has a well equipped functional laboratory with sophisticated instruments like GC MS, LC MS, MS, ELISA reader, HPLCs and spectrophotometers.

Dr S G Vasantharaju

Dr Jagadish P C

1

Synthesis of new chemical entities and their preclinical evaluation of antidiabetic and antihyperlipidemic drugs belongs to Thaizolidin-4-ones, Analytical and bioanalytical method development and validation for drug substances and drug products

1

Drug discovery and Pharmaceutical Analysis, Pharmaceutical Analysis, Analytical and bio-analytical method development and validation, Phytochemistry and phytochemical screening of plant drugs

139

Faculty of the Department have developed expertise in analytical and Bioanalytical method development and validation, inborn errors of metabolism screening and biomarker identification, crystal engineering to enhance the pharmacokinetics and pharmacodynamics of the poorly water soluble drugs etc. The department runs few projects in these areas in collaboration with other MAHE institutions. It also offers analytical consultancy and laboratory services to researchers from other institutions both from MAHE and others. Department has the unique distinction of placing 100% of its students from inception.

Dr Sudheer Moorkoth

Dr V M Subrahmanyam

1

1

Enzymetechnology, Bioconvenions, Bioprocess technology

1

Biotechnology, Cell Biology, Biochemistry, Virology and Microbiology, Cell Biology, Virology and Proteomics, Cancer biology, Virology, Proteomics and Peptidomics

Pharmaceutical Biotechnology Dr Raghu Chandrashekar H

Organic synthesis Docking and QSAR studies Structural interpretation using various spectral techniques such as UV, IR, MS and NMR. Biological screening in the area such as anticancer, antiinflammatory, and antimicrobial activities. Analytical method development using HPLC, GC-MS, UV

140

The department was established in the year 2005 and has grown rapidly carving a niche for itself. Infrastructure is built up with generous funding from Manipal Academy of Higher Education and several research grants from various government and private agencies. Sophisticated equipment viz., Fermenter, orbital shaking incubators, CO2 incubator, inverted and advanced fluorescence microscopes, Gel documentation system, Chemi-doc, ELISA plate readers, PCR, RTPCR, Western blot system, Electrophoresis units, Deep freezers, Liquid Nitrogen refrigerator, Auto analyzer, Cooling centrifuge, Biosafety Cabinets, sonicator, vacuum rotary evaporator etc., provide the facilities to carry out research in the areas of Bioprocess engineering as well as tissue culture and cancer biology. Apart from two laboratories for under graduate students, two separate spacious laboratories are provided for graduate students.The department offers a two year postgraduate program (MPharm) in Pharmaceutical Biotechnology. The teaching faculty includes a good blend of experienced and young teachers who educate, encourage and guide students of pharmacy in their academics and research. The department has so far produced more than 94 post graduates and over 10 Doctorates. More than half of graduate students from the department are employed in leading biotech, pharmaceutical industries such as Biocon, Lupin, Pfizer, Dr. Reddy‟s, Sandoz, Mylan, Agilent Technologies, Quintiles, Ranbaxy, Nicholas Piramal, Biogenomics,

Dr Jesil Mathew A

1

Bacterial Biofilms and antibiotic resistance, Anticancer studies molecular biology and microbiology

Dr Angel Treasa Alex

1

Drug delivery, Biotechnology

141

Serum Institute, etc and rest are either pursuing doctoral studies or opted teaching as their career at various prestigious institutes both in India and abroad. Few have become entrepreneurs, community pharmacist or business analysts.The department is successful in receiving funding from various agencies such as DBT, DST and AICTE.

AICTE-NATIONAL DOCTORAL FELLOWSHIP SCHEME (NDF) Application for Admission to Ph.D. Degree Programme 2018-2019 Copy to Principal Coordinator

1.

Application Number

:

2.

Name

:

3.

Contact Address

:

4.

Mobile

:

5.

Phone

:

6.

Email

:

7.

Date of Birth

:

8.

Gender

:

9.

Age (Auto calculate)

10.

Category

:

11.

Marital Status

:

12.

Whether Physically Disabled

:

13.

Aadhar Number

:

14.

PAN Number

:

15.

Details of UG Degree

16.

st

Age as on 31 Aug 2018: (not greater then 30 yrs for General, 5 yrs relaxed for SC/ST/Women/PWD)

Yes/No

Year of passing

:

University

:

Class/Division

:

Overall %/ CGPA

:

Details of PG Degree

:

Year of passing

:

University

:

Class/Division

:

Overall percentage/CGPA

:

In Conference Proceedings

:

17.

Teaching Experience as th on 28 Feb 2018 (Wednesday)

18.

Number of Research Papers published:

a)

In Referred Journals:

:

b)

142

19. Institutions and Departments to which Admissions to be taken: Name of the Institute

Domain (Engineering / Pharmacy)

(Drop down list provided below) Preference 1 Preference 2 Preference 3

Engineering Domain a) Sl. No. Institute Name( Tentative list) 1

BMS College of Engineering, Bangalore

2

Coimbatore Institute of Technology, Coimbatore

3

College of Engineering Trivandrum, Thiruvananthapuram

4

College of Engineering, Pune

5

Govt. Engineering College Thrichure, Thrissur

6

Jadavpur University, Kolkata

7

Madhav Institute of Technology & Science, Gwalior

8

Netaji Subhas Institute of Technology, New Delhi

9

Pondicherry Engineering College, Puducherry

10

PSG college of Technology, Coimbatore

11

Rajiv Gandhi Institute of Technology, Kottayam

12

Shri Guru Gobind Singhji Institute of Engg. & Tech., Nanded

13

Thiagarajar College of Engineering, Madurai

14

TKM College of Engineering, Kollam

15

Veer Surendra Sai University of Technology, Burla

16

Walchand College of Engineering,Vishrambag, Sangli

17

Govt. College of Engineering Amravati

18

Govt. College of Engineering Aurangabad

19

Indira Gandhi Institute of Technology, Sarang,

143

Choice of research thrust areas (Drop down list provided below) First Choice

Second Choice

Third Choice

20

Sant Longowal Institute of Engineering & Technology,

21

The National Institute of Engineering, Mysore

22

Veermata Jijabai Technological Institute (VJTI), Mumbai

a) Pharmacy Domain Sl. No. Institute

1

Bharati Vidyapeeth Deemed University, Pune Poona College Of Pharmacy, Erandwane, Pune, Maharashtra

2

Delhi Institute of Pharmaceutical Science & Research (DIPSAR) Pushp Vihar, Sector-III, M.B. Road, New Delhi

3

Jss College Of Pharmacy Post Box No. 20, Rocklands, Ootacamund-643001, The Nilgiris, Tamilnadu

4

Jadavpur University (Pharmacy) Kolkata, West Bangal

5

Birla Institute Of Technology, Mesra, Ranchi, Jharkhand

6

Manipal College Of Pharmaceutical Sciences Manipal University, Madhav Nagar, Manipal, Udupi Dist., Karnataka

List of choice of research thrust areas(Indicative) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Nuclear Engineering and allied technologies Mechatronics system development for better performance Efficient power generating systems Smart technology for Indian agriculture Renewable & sustainable energy and Energy Economy Big data analytics for economic development of the country Internet of Things Data Analytics and Machine Learning Cognitive and Intelligent Systems Economical & affordable housing and transportation system Nuclear Power generation & allied system Alternate sustainable / Green Engineering System Nano science and Technology Smart Sensor System Development Robotics and Embedded Control Research in drug development for Cancer, Heart & HIV disease

144

20. Academic Data (Examination Passed B.E/B.Tech/B.Arch/B.Sc(Engg)/B. Pharm or equivalent)

Semester/Year

University

Year

Specialization

Total Marks

Class

Percentage Marks Obtained

21. Academic Data (Examination Passed M.E/M.Tech./M. Pharm or equivalent) Semester/Year

University

Year

Specialization

Total Marks

Class

Percentage

Marks Obtained

(If marks obtained less than 75% -CGPA 7.5 on the scale of 10 for general category students and 70% marks-CGPA 7.0 on the scale of 10 for reserved category students, applicant cannot proceed further)

22. Any other Qualification Degree

University

Year

Specialization

Total Marks

Class

Marks Obtained

Percentage

th

23. Teaching Experience at Degree Level as on February 28 , 2018 (Wednesday) Sl.No

Name and Address of Employer & Institution

From (Date)

To (Date)

Years-Months

Designation

Years-Months

Designation

th

24. Industrial/Research Experience as on February 28 , 2018 (Wednesday) Sl.No

Name of the Organization

From (Date)

To (Date)

25. Short Term Courses Sl.No

Name of the Course & Category

Organizer

Days

From

To

26. Research Papers/Book Sl.No

Title of Paper/Book

Name of Author(s)

Name of Journal/Conference

Year

Organizer

Days

From

Vol.

Pages

27. Conference Attended: Sl.No

Conference Name

145

To

28. GATE/GPAT Examination Details: a)

b) c) d)

Qualified

Not Qualified

(If Qualified then only Proceed) Qualified Year (From 2013-onwards are eligible) Score Subject/Discipline

(list of subjects/discipline) 1. GPAT 2. GATE                       

GATE Paper Aerospace Engineering Agricultural Engineering Architecture and Planning Biotechnology Civil Engineering Chemical Engineering Computer Science and Information Technology Chemistry Electronics and Communication Engineering Electrical Engineering Ecology and Evolution Geology and Geophysics Instrumentation Engineering Mathematics Mechanical Engineering Mining Engineering Metallurgical Engineering Petroleum Engineering Physics Production and Industrial Engineering Textile Engineering and Fiber Science Engineering Sciences Life Sciences

Code AE AG AR BT CE CH CS CY EC EE EY GG IN MA ME MN MT PE PH PI TF XE* XL**

29. Upload Documents: a)

Research Paper/ Publications

b) c) d) e) f) g)

Upload Qualification Certifications (10th, 12th , Bachelors, Masters, Other Qualification) Upload Conference papers Upload Photograph Upload Signature GATE/GPAT Score Card Statement of Purpose

(Make flexible to upload more documents with remarks) Declaration a.

I declare that all the information given by me in this application form is correct to the best of my knowledge and belief. I understand that false or incomplete information would cause invalidation of my application.

b.

I shall abide by the decision of the NDF National Nodal Centre in all matters pertaining to admissions. The decision of the Committee shall be final and binding on me.

146

c.

I shall abide by the rules and regulations of the Institutions to which I will be offered admission, if selected.

d. For all legal cases, suits, proceedings, the jurisdiction of a court of law shall be the place at which the Institution considered me for admission or at the place where the office of the NDF National Nodal Centre Coordinator is located only. e. I have understood the contents of the application form, particularly this declaration made by me here.

Place: Date:

Signature of the Applicant

147

For any further details, please contact the Principal Coordinator at address indicated below

Dr.S.Saravanan, Principal Coordinator, AICTE-NDF, PSG College of Technology, Peelamedu, Coimbatore- 641004, Ph : 0422-4344426 Mobile : Email : [email protected]

148