ALIGNMENT#JOURNAL TAPER AND PROFILE OF CRANKSHAFT. JOURNALS# ... BEARINGS#CAMSHAFT FOLLOWERS#CRANKSHAFT BEARING.
REF REQ No: - 11109431 DESCRIPTION: Kit diesel engine repair at the Durban Container Terminal, Pier 2.
KIT, DIESEL ENGINE REPAIR; P/N: 142115097, TEREX (PTY) LTD; 1.SCOPE OF WORK;#1.1 GENERAL DESCRIPTION OF THE WORK#THE SCOPE OF WORK CONSISTS OF THE REPAIR AND REFURBISHMENT OF STRADDLE CARRIER ENGINE UNITS. THE SCOPE COVERS A GENERAL REFURBISHMENT OF AN ENGINE U NIT. THE CONTRACTOR IS TO PICK UP AND DELIVER THE ENGINE FROM THE DURBAN CONTAINER TERMINAL PIER 2 STRADDLE WORKSHOP PREMISES. #1.2 #THE SCOPE COVERS THE FOLLOWING SERVICES:#THE REPAIR AND REFURBISHMENT OF A CATERPILLAR INDUSTRIAL C13 ENGINE#THE REPAIR AND REFURB ISHMENT OF A CUMMINS QSM11 ENGINE#THE REPAIR AND REFURBISHMENT OF A VOLVO TAD1142VE (STAGE 4) ENGINE##THE GENERAL SCOPE FOR THE REF URBISHMENT OF THE ENGINES IS AS FOLLOWS:#ACTION#COMPONENTS#CLEAN#AFTERCOOLER CORE#FUEL INJECTOR BODY#OIL COOLER CORE#INSPECT#CAMSHA FT JOURNALS AND LOBES#CRANK TUNNEL ALIGNMENT AND CAM TUNNEL ALIGNMENT#JOURNAL TAPER AND PROFILE OF CRANKSHAFT JOURNALS#TURBOCHARGER #INSPECT AND REPLACE IF OUT OF SPECIFICATION#CONNECTING RODS#CRANKSHAFT#PUSH -ROD CONDITION#ROCKER SHAFT AND ADJUSTOR#REPLACE#ALL B EARINGS AND BUSHES#ALL FILTERS #ALL PIPES#ALL SEALS AND GASKETS#ALL SENSORS#CAMSHAFT BEARINGS#CAMSHAFT FOLLOWERS#CRANKSHAFT BEARING S#CRANKSHAFT SEALS#CRANKSHAFT VIBRATION DAMPER#CYLINDER HEAD BOLTS#CYLINDER HEAD VALVES#CYLINDER LINERS#ENGINE BREATHER#ENGINE CAP BOLTS#FAN DRIVE BELT#FUEL TRANSFER PUMP#INJECTOR SLEEVE GASKET#INJECTOR SLEEVE O-RING#MAIN JOURNAL BOLTS#OIL PUMP AND RELIEF VALVE# PISTON RINGS#PISTONS#THERMOSTAT#VALVE GUIDES#VALVE ROTATORS#VALVE SEATS AND SEALS#WATERPUMP#PISTON PIN#RETAINERS#LINER SEALS NB: 154710--------------1 (S/NO LGK23380) 1.return old parts to the stores, failure to return will Result in non-acceptance. 2. provide Test Certificate. 3.provide Dyno Test. 4.s/n LGK 23380 Lead time to be included in quote. Contact Persons: Thulani Nyathi (031) 361-6597
Quotation Instructions: 1).PLEASE SUBMIT YOUR QUOTATION ON YOUR COMPANY LETTER HEAD. 2).PLEASE INCLUDE YOUR COMPANY DETAILS.
3). Quotations must be in a sealed envelope with the seal signed by the sender. 4). Please quote the above Reference number on your Quotation documents “As” well as on the sealed envelope with description. 5). Envelopes must be deposited into the Quotation Tender Box at the Security Hut, at the entrance to the Admin Building, Durban Container Terminal, Langerberg Road, Pier no2. * Incomplete Quotations will NOT be accepted!
* All Quotations must have the following:(i) Validity period of the Quotation (ii) Guarantees / Warranties (iii)Delivery Date / Lead Time / Stock Availability. 6). NO late Quotations will be accepted! 7). PLEASE ATTACH YOUR BBBEE Certificate/Affidavit, CSD PROOF OF REGISTRATION &
VALID TAX CLEARANCE CERTIFICATE 8). Terms and conditions will be available on request. 9). Transnet Port Terminals has the right to split the award of the order/s between more than one Supplier/Service Provider should it at Transnet’s discretion be more advantageous in terms of, amongst others, cost or developmental considerations 10). Adhere to all Scope of Work (SOW) requirements at all times.
NB> This Request will close on: Date: 28th June 2018, Time: 12h00.
