Change the unit's remote control code to match the remote control code of the DVD recorder. For about one ... press and
Remote Control Operation Guide
Welcome to the world of Home Theater. This remote control is the key to your home theater experience.
Model No. EUR7722KM0
First, turn on the receiver.
Now, you can operate other Home Theater components.
Page 2
Page 4
Page 2
Page 4
Page 3
Page 5
You may need to enter a code to operate some equipment.
Page 6
P PC
RQT7999-P
H0405WM0
TV Watching TV
DVD PLAYER Watching DVDs
Switch on
Switch on Switch on the television and select input
Switch on the player and start play Switch on the television and select input Switch off
Switch off
Operating the DVD player
Operating the TV
Change the channels sequentially
Clear the menus or return to the previous menu Show disc menus
Show player menus
Select and enter menu items
With some Panasonic DVD players, press [FUNCTIONS] for the “DISPLAY” function.
Select the channel directly
Skip items during play
Stop play
Pause play
Start play from a selected item Search through the disc
RQT7999
Adjust the volume
Start slow-motion play
(5-disc changer) Specify a disc
2
To view frame-by-frame
DVD RECORDER Watching DVDs
Operating the DVD recorder
Switch on Switch on the television and select input
Select drive
If it does not change Switch on the recorder and start play
Switch off
After performing the following operations, press this button again. 1. Press [DVD RECORDER]. 2. While pressing [ENTER], press and hold [8] for approximately 2 seconds. To return In step 2 above, while pressing [ENTER], press and hold [9] for approximately 2 seconds.
Operating the DVD recorder
The factory setting is [9].
Clear the menus or return to the previous menu Show disc menus
Show recorder menus
Change the unit’s remote control code to match the remote control code of the DVD recorder.
Select and enter menu items Stop play
Skip items during play
When using a Panasonic DVD recorder
Pause play
Preparations: Check the remote control code of the DVD recorder. For about one second press [ENTER] and the button ([1], [2] or [3]) which is the same number as the remote control code set by the DVD recorder. The factory setting is [1].
Search through the disc
Start slow-motion play
Start play from a selected item To view frame-by-frame
3
VCR
CD PLAYER
Watching videotapes
Listening to CDs
Switch on
Switch on
Switch on the player and start play
Switch on the television and select input Switch off
Switch on the player and start play
Operating the CD player
Switch off
Start play from a selected track
Operating the video deck Specify a disc [3- or 5-disc changer]
Stop play
Change the channels sequentially Start play from a specified disc [MEGA CD changer] (holds more than 50 discs)
Pause play
Stop play Skip tracks during play Pause play Rewind or fast-forward
(Press and hold) Search through the disc
4
RQT7999
Select the channel directly
RECEIVER Listening to the radio Select FM or AM (Press and hold)
Adjusting speaker channel balance
Switch off
Start a test signal
Operating the radio Select the speaker channel and adjust its output level
Change the preset channels sequentially
Stop the test signal Select the preset channel directly
Select radio stations by frequency
Other functions
DOLBY PRO LOGIC x MODE Select MOVIE (DOLBY EX), MUSIC or GAME when Dolby Pro Logic x mode or Dolby Pro Logic mode is on
When you select MUSIC
To cancel
To mute the volume
Change the sound effect To adjust the volume
DTS NEO:6 MODE Select a DTS NEO:6 mode: CINEMA or MUSIC
When you select MUSIC
To cancel To select DVD ANALOG 6CH Change the sound effect
(Press and hold) To adjust subwoofer output level
SFC MODE Select an SFC mode
To cancel Dim the display
Select the speaker channel and adjust its output level For selecting a re-master mode Change the sound effect
5
CODES This remote control can operate Panasonic and Technics audio-visual equipment that has remote control sensors. You may need to change the remote control code. It can also operate some other brands of televisions, video cassette players, and DVD players. Check the table for the brand and enter the code as follows.
Changing the codes TV
VCR
The remote control outputs the on/off signal. If the code is correct, the equipment turns on or off. If it doesn’t, try entering another code.
DVD player
Press and hold the button corresponding to the equipment
Enter the first digit
Enter the second digit
Note that this remote control cannot operate some equipment and that it may not be able to perform some operations. Re-enter the codes after you change the batteries.