Notes use scraps if you have it or go get short board from local store use scraps if you have it or go get short board from local store
Cut List For 1 Santa you will need: 1 piece – 1 x 10 x 8-3/4” 1 piece – 1 x 4 x 6”
Instructions 1- Print the attached tree outline full size with minimal margins. 2- Cut the base from the 1x4 stock at 6” 3- Cut the main piece from the 1x10 stock at 8-3/4” 4- Trace tree onto the 1x10x8-3/4” board 5- Using a jig saw cut out the tree shape 6- Sand all edges on both the base and tree rounding edges to your desired look 7- Paint base piece black and let dry 8- Paint tree red and let dry 9- Drill pilot hole in center of base and bottom of tree trunk 10- Attach base to tree using the #8 screw 11- Finish painting (hat, boots, beard, face, etc)
