SLE Technical Training 2017
Technical Training Courses Structured Education for Biomedical Engineers 2017 Programme
SLE Technical Training: An Overview
All SLE Technical Training courses cover the following areas and are a mixture of lectures and practical, hands-on sessions:
Every year SLE organises and runs a series of Technical Training courses to support our world-wide user-base. These are run for our distributors’ engineers and for hospital biomedical engineers.
✓ An introduction to SLE: company history, SLE products and future plans.
For 2017 we have updated and refreshed the SLE5000 course to include the 3rd Edition changes which introduce some hardware and software updates to the unit. We are also pleased to add our first in-house SLE6000 training program dates for 2017!
✓ The valveless ventilation concept. ✓ Introduction to the SLE service team. ✓ SLE ventilators - constant flow, fresh gas explained. ✓ Patient circuits. ✓ Introduction to humidity and humidity control. ✓ SLE procedures and how to contact us. Courses are designed for biomedical engineers with a basic understanding of medical equipment. All courses cover all aspects of the operation, functionality and maintenance of SLE ventilators, starting with the operation of the ventilator and modes of ventilation, then looking at the electronic and pneumatic modules, before breaking down each module to component level. There are plenty of opportunities for free questioning and our qualified trainers are able to spend time on particular areas of interest. When requested, the SLE500 compressor, SLE Inosys, SLE2000 and SLE2000 HFO can also be covered during in-house courses. Please contact [email protected]
for more information.
As always, course content is specially structured for biomedical engineers and is designed to be relevant to real life situations. It includes:
Extensive use of hands-on exercises to reinforce and apply concepts. Friendly, expert instruction in a relaxed, professional, learningoriented environment. Honest, unbiased information with no ‘sales’ element. A focus on creating a true understanding of the critical concepts. We cover the how’s and why’s, so that you can better retain the information, and better apply the techniques you learn.
About the Courses ✓ SLE6000 new features presentation.
✓ SLE6000 pneumatics (including layout, component identification and replacement, oxygen calibration procedures and pressureregulator operation) (practical session). ✓ SLE6000 electronic module including layout, hardware versions, software versions (practical session). ✓ Software upgrades (practical session).
✓ Engineering mode calibration including full calibration, sensor calibration, jet calibration and flow system calibration (all practical). ✓ Planned preventative maintenance - 12 months and 30,000hrs/60months (practical session). ✓ Operational verification (practical session).
✓ Critical component replacement (practical session) ✓ Fault-finding (test).
✓ SLE5000 Pneumatics (including layout, component identification and replacement, Oxygen calibration procedures and pressure regulator operation) (practical session). ✓ SLE5000 Electronic module including layout, hardware versions, software versions and upgrading software (practical session). ✓ Engineering mode calibration including full calibration, sensor calibration, jet calibration and flow system calibration (all practical). ✓ Planned preventative maintenance - 12 months, 24 months and 48 months (practical session). ✓ Operational verification (practical session).
✓ Critical Component replacement (practical session). ✓ Fault-finding (test).
✓ 3rd Edition updates on hardware and software.
Distributors’ On-Site Courses
SLE is pleased to offer our distributors’ engineers on-site training, at their premises