Angus Fire Ltd. Station Road, Bentham, Lancaster, LA2 7NA, UK. Tel: +44 (0)1524 264000 ⢠Fax: +44 (0)1524 264180. Emai
REMB 50
Titan REMB50 Bronze Fire Monitor Nominal flow 5,000 l/min z Simple and reliable design z Low maintenance z Most models available with lever or gearbox control z Suitable for use where explosive atmospheres may be present
The Angus REMB50 bronze fire monitor is designed for remote control in both the horizontal and vertical planes and for remote control of a fog/jet nozzle or branch pipe spreader where fitted.
Body materials Bronze body to EN CC491K, equivalent to LG2, Red Brass, ASTM B62 and UNI 7013-8 Copper Zinc Lead
Tin
Computer designed guide vanes cast into the body reduce turbulence and spin in the water stream lowering pressure loss and improving jet reach.
85% 5% 5% 5%
Electric motors, fitted to the monitor body, move the waterway in the horizontal and vertical planes while solenoid valves channel water pressure via hydraulic pistons to move a fog/jet nozzle or foam cannon spreader.
Bearing materials Stainless steel (SS316) double ball race bearings on both axis with Viton seals rated up to 120°C
Electrical power is normally supplied from a remote control panel. A slave or secondary panel can also be sited close to the monitor. Both the Electric motors, the master and slave panels and the solenoid valves can be certified for use in areas where explosive gasses may be present. Each integral motor and gearbox incorporates an adjustable, electrical torque limiting control and infinitely adjustable limit switching. All Electric motors are provided with manual override handles to enable the monitor to be steered manually if power fails. All Angus bronze monitors are based on a proven low maintenance design.
Material certification to EN 10204 3.1 is available on request.
Electric motor characteristics: Electrical supply: 380VAC 3ph 50 Hz (alternative voltages are available on request) Power: 0.75 kW Protection: IP57
Design pressure Maximum working pressure 16 bar Hydraulic factory test pressure 24 bar Performance Pressure loss at 5,000 l/min 2.9 bar. (For pressure losses at other flow rates refer to the pressure loss graph.) Weight 90 kg Movement
80
360º stop to stop rotation in the horizontal plane +90º / -45º movement in the vertical plane -50 90 360 Stop to Stop
-45
Explosive rating: EExd IIB T3 Insulation class: F Cable entry: No 2 PG 21. No 1 PG 13.5 Inlet connection Standard flange 4” ANSI 150 FF (150250 AARH) (3” ANSI, DIN and non standard flange options available) Outlet connection 150 x 150 square flange (alternative connections are available to match nozzle and cannon options)
360 Stop to Stop
360 Continuous
360 Continuous
Titan REMB50 Bronze Fire Monitor Nominal flow 5,000 l/min
Optional Paint Finish Surface preparation Primer coat Intermediate coat Finish coat Total dry film thickness
Solvent cleaning Epoxy 30μm Epoxy grey 40μm Polyurethane 40μm Red RAL3000 110μm
Length and height of monitor water jet FJ5000 nozzle at 11 bar monitor inlet pressure: Flow 5270 l/min Maximum jet throw at 32°, 90m Maximum jet height at 75°, 52m
3.0 2.5
ΔP bar
2.0 1.5 1.0 0.5 0.0 1,000
2,000
3,000
4,000
5,000
6,000
Flow l/min
Outlet nozzle options: Bronze bodies, electro/hydraulic controlled, fog/jet nozzles: FJH 1300 to 5000 l/min Stainless steel barrel with bronze base, aspirating foam cannons: FC 800 to 6000 l/min Stainless steel water jet pipes: WC 1500 and 3000 l/min A range of dry powder nozzles is also available – refer to Angus Fire All foam cannons come with the option of an electro/hydraulically operated spreader. All nozzles and branchpipes come with the option of a self inducing foam connection. (For technical details of nozzles and branchpipes see separate data sheets.) .
Fog/Jet Nozzles
Note: The jet throw depends on a number of variables such as wind direction, type and concentration of foam in the water and the condition of the monitor water ways and nozzle. For throw and height calculations at different inlet pressures and flows and for different nozzles and angles refer to the Angus interactive electronic data sheet.
52m Foam Cannons
Maximum throw
90m
E
G
h
The Angus monitor range includes bronze models up to 8,500 l/min and stainless steel models up to 50,000 l/min. Most models are available with lever or gearbox control, automatic oscillation or with hydraulic or electric remote control. All are suitable for use where explosive atmospheres may be present. Angus is a company assessed to ISO 9001:2008
INTERNATIONAL SALES Angus Fire Ltd Angus House, Haddenham Business Park, Pegasus Way, Haddenham, Aylesbury, HP17 8LB, UK Tel: +44 (0)1844 293600 • Fax: +44 (0)1844 293664
UK SALES Angus Fire Ltd Station Road, Bentham, Lancaster, LA2 7NA, UK Tel: +44 (0)1524 264000 • Fax: +44 (0)1524 264180
Email:
[email protected] • Web: www.angusfire.co.uk
Angus Fire operates a continuous programme of product development. The right is therefore reserved to modify any specification without prior notice and Angus Fire should be contacted to ensure that the current issues of all technical data sheets are used. © Angus Fire 6416/3 02.14
