Tulip Wreath - Riley Blake Designs

12 downloads 210 Views 1MB Size Report
¼ yard (25 cm) blue diamond (C4324 Blue). 5/8 yard (60 cm) blue stripe (C4325 Blue). 1/8 yard (15 cm) green stripe (C43
Tulip Wreath

Tulip Wreath FINISHED QUILT SIZE 44” x 44” Measurements include ¼” seam allowance. Sew with right sides together unless otherwise stated.

Blue Diamond Cut 1 flower from Template E. Cut 1 flower center from Template F.

Please check our website www.rileyblakedesigns.com for any revisions before starting this project. This pattern requires a basic knowledge of quilting technique and terminology. The quilt and block diagrams portrayed are virtual images. The layout and look of your project may differ when using actual fabric.

Blue Stripe Cut 8 strips 2½” x WOF for Borders 1 and 3.

QUILT ASSEMBLY Refer to the quilt photo for placement of fabrics.

FABRIC REQUIREMENTS 1 yard (95 cm) blue main (C4320 Blue) ¾ yard (70 cm) cream damask (C4321 Cream) ¼ yard (25 cm) pink damask (C4321 Pink)

Quilt Center Refer to quilt photo for placement of flowers, flower centers, tulips, leaves, and stems. Use your favorite method of appliqué to attach the pieces to the cream damask 24½” square to create the quilt center.

/8 yard (15 cm) yellow damask (C4321 Yellow)

1

¼ yard (25 cm) green tulip (C4323 Green) ¼ yard (25 cm) blue diamond (C4324 Blue) 5/ yard (60 cm) blue stripe (C4325 Blue) 8 1/ yard (15 cm) green stripe (C4325 Green) 8 Binding 5/8 yard (60 cm) Backing 3 yards (2.75 m) CUTTING REQUIREMENTS Please read instructions first before cutting. Seam allowances vary so measure through the center of the quilt before cutting border pieces. Add ¼” seam allowance or reverse images if necessary for your favorite method of applique.

Cream Damask Cut 1 strip 24½” x WOF. Cut the strip into 1 square 24½” x 24½”.

Yellow Damask Cut 1 flower center from Template C.

Borders Seam allowances vary so measure through the center of the quilt before cutting border pieces. Sew border strips together end to end if necessary to get the length needed. Sew side borders first. Border 1 Side borders should be 24½”. Top and bottom borders should be 28½”. Border 2 Side borders should be 28½”. Top and bottom borders should be 40½”.

Blue Main Cut 4 strips 6½” x WOF for Border 2.

Pink Damask Cut 4 tulips from Template A. Cut 1 flower from Template B.

Green Stripe Cut 4 stems from Template G.

Border 3 Side borders should be 40½”. Top and bottom borders should be 44½”. Finish quilt by layering the quilt top, batting, and back. Bind with your favorite Riley Blake fabric from the Floribella Collection. Have fun with your colors and enjoy the journey of making your quilt.

Green Tulip Cut 8 leaves from Template D.

©2015 Riley Blake Designs

Tulip Wreath

A D

C

F

G

Measure 1 Inch

©2015 Riley Blake Designs

Tulip Wreath

B

Measure 1 Inch

©2015 Riley Blake Designs

E1

©2015 Riley Blake Designs Tape E1 and E2 together on the dashed lines to complete Template E.

Tulip Wreath

Measure 1 Inch

Tulip Wreath

Tape E1 and E2 together on the dashed lines to complete Template E.

E2

Measure 1 Inch

©2015 Riley Blake Designs